Download @HEADER 1B = GETTING STARTED

Transcript
2
LOADING A RIBBON
This chapter describes how to load a ribbon.
Use a ribbon when printing on thermal transfer supplies.
There are two types of supplies:
Thermal Direct Supplies:
do not use a ribbon for printing.
Thermal Transfer Supplies:
require a ribbon for printing.
If you are using thermal direct supplies, do not load a ribbon. See Chapter 3,
“Loading Supplies” for more information.
The printer automatically detects if a ribbon is installed when you turn on the printer
and switches to thermal transfer printing mode.
Note:
Make sure the ribbon window and the supply door are closed when you turn
on the printer.
Loading A Ribbon 2-1