Download Netfinity 3500 M10 User`s Handbook - ps
Transcript
Removing adapters Before you begin Read “Safety information” on page 70 and “Handling static-sensitive devices” on page 72. Turn the server and all other connected devices off. Disconnect all external cables and power cords, and then remove the server cover (see “Preparing to install and remove options” on page 75). 1. Remove the access clip on the rear frame by sliding it upward approximately 12mm (0.5 in) then slide it to the right until it comes off. Access Clip 2. Locate the adapter and remove the screw. Chapter 5. Installing options 107