Download Philips MX2791B 27" TV

QUICK USE AND INSTALLATION GUIDE
TABLE OF CONTENTS
11
12
Getting Started
1
Warning/Precautions ..................................1
Hooking Up Your TV ................................1
How to Use the “INSTALL” Controls ..................2-3
• Using the Language Control ...................................2
• Setting the TV to Auto Program Channels .............2
• Setting the TV for a Cable or Antenna Signal ........2
• Using the Adding and Deleting Channels...............3
• Setting the Channel Name Control .........................3
• How to use the Smart Clock control.......................3
Basic TV and Remote Control Operation .................4
7
Color Television and Remote Control
ANT(ENNA) A & B INPUTS
Y
our TV has two separate ANT(enna)/Cable
inputs on the rear of the
set. These two signal
inputs offer convenient
hook-up options for both
normal TV program viewing and Picture-In-Picture
(PIP) features.
The ANT(enna) A input is
intended for use and viewing on the TV’s main
screen. Your home’s primary Antenna, or Cable TV
signal, should be connected to this input for normal
TV setup, use and feature
operation.
6
5
Please retain all these materials and keep them
handy for future reference.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD DO NOT EXPOSE THIS UNIT TO RAIN
OR EXCESSIVE MOISTURE.
NOTE: This Quick Use Guide may be used with
other models. Some of the features listed may or
may not apply to your TV.
SMART
HELP
BEGIN
A typical ANT(enna)
A and B connection (using a
common signal source and an
optional Signal Splitter):
If your Antenna or Cable TV
signal has a round cable connector (75 ohm) on the end,
then you're ready to connect it
to the 75ohm Signal Splitter.
If your antenna has flat twinlead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300 to 75
ohm adapter before connecting
to the 75ohm Signal Splitter.
Connect the twin Output
plugs on the Signal Splitter to
the ANT A and ANT B inputs
on the rear of the TV. Push the
round connector end of the RF
Coaxial Cable onto the
ANT(enna) plug and screw it
down tight (if using threaded
cables).
Connect your Antenna or
Cable TV signal to the single
75 ohm input plug on the twoway Signal Splitter (optional).
Then connect two lengths of RF
Coaxial Cable to the two Output
plugs on the two-way Signal
Splitter (F-type connector on
both ends).
Remember,
be sure to set the
TV for the type signal you've connected (see "TUNER"
section on page 2 of
this Guide.)
Your TV can set
itself to select only
the channel numbers
on your Cable system (see “Auto
Program" page 2). If
you use a Cable
Converter box, set
the TV to the same
channel as the converter's CH 3/4
switch (on the rear of
the converter.)
Combination VHF/UHF Antenna
Back of TV
300 to 75Ω Adapter
Twin Lead
Wire
OR
- Outdoor or Indoor Antenna receives normal broadcast channels
2-13 (VHF) and 14-69 (UHF).
Round Cable
75Ω Ohm
The ANT(enna) B input is
a second, or auxiliary signal source, designed to
supply your TV’s PictureIn-Picture (PIP) feature.
For many homes the use of
a single existing Antenna
(or Cable TV) source, for
both ANT A and B, will be
the preferred method of
connection. This type of
connection (optional
Signal Splitter required)
will work properly for the
TV’s Main on-screen features, as well as retain all
the features designed for
PIP. For more details refer
to the Picture-In-Picture
section in your other
owner’s manual.
8
To order accessories
such as those listed
below contact your
dealer or our Parts
Information Center
at: 1-800-851-8885.
8
+ R –
– L +
SURROUND SOUND
ATTENTION - TO AVOID DAMAGE
PIP ANT "B"
75
S-VIDEO
1. DO NOT CONNECT SURROUND SOUND SPEAKERS
TO A SEPARATE AMPLIFIER OR TO SPEAKERS
CONNECTED TO ANOTHER PRODUCT.
2. DO NOT CONNECT LEFT AND RIGHT SPEAKER
OUTPUT TOGETHER.
VIDEO
L
AUDIO
ANT "A"
75
R/MONO
IN-2
2
1
IN-1
OUT
ANT(enna) B
Input
• Two Way Splitter
8
8
+ R –
• 300-75 ohm
Adapter
– L +
SURROUND SOUND
PIP ANT "B"
75
ATTENTION - TO AVOID DAMAGE
S-VIDEO
1. DO NOT CONNECT SURROUND SOUND SPEAKERS
TO A SEPARATE AMPLIFIER OR TO SPEAKERS
CONNECTED TO ANOTHER PRODUCT.
2. DO NOT CONNECT LEFT AND RIGHT SPEAKER
OUTPUT TOGETHER.
VIDEO
OR
OPTIONAL TWO-WAY
SIGNAL SPLITTER
(single 75ohm Input to twin
75 ohm Outputs - optional
RF Coaxial connecting
cables also required)
AUDIO
R/MONO
Round Cable
75Ω Ohm
3
Note: Proper operation of your TV is not dependent upon
connection of the ANT B input. Its main purpose is to provide
an easily connected, dedicated picture source for PIP feature
use. Other signal source options (such as a satellite dish system, additional external antenna, VCR, or Video Game) could
also be connected and displayed on the TV screen through the
use of the ANT B input.
Cable TV Company
IN
OUT
Note: Although the ANT B input can be used and swapped
as the source for the TV’s Main picture, certain setup features (such as Smart Clock) are only based on a signal being
detected at the ANT A input. To ensure that all features are
operating properly, you may not want to rely solely on the ANT
B input as your TV’s Main screen signal source.
• The signal routed to the TV’s ANT A input will allow for
Premium/Movie channels to be viewable on the TV.
• Channel selection will be at the Converter.
• The ANT A input channel on the TV should be set to the same
output channel as the Converter box (usually CH3 or 4).
F
IN-1
ANT(enna) A
Input
Cable TV Signal
CABLE CONVERTER BOXES
• UHF/VHF
Antenna
Combiner
L
ANT "A"
75
IN-2
CABLE BOX
or homes with Cable
TV Converter
Descrambler Boxes (with
Premium/Movie Channels
scrambled), follow the
steps to the right for an
alternative ANT A and
ANT B PIP feature
hookup. Note the Cable TV
signal will be split before
connection to the
Converter box (an optional two-way 75 ohm Signal
Splitter will be required).
For details on product registration, warranty,
and service refer to the other literature included
with your TV information packet.
3
4
8
ANTENNA OR
CABLE TV
•
2
10
9
Connect to ANT A Input
Connect to ANT B Input
• The signal routed to the TV’s
ANT B input will allow for the
selection and viewing of Cable
channels at the TV (except for the
scrambled Premium/Movie
channels).
OUT
Cable TV Company
OPTIONAL TWO-WAY
SIGNAL SPLITTER
Cable TV Converter
Box Connection
BEGIN
Connect your Cable
TV signal to the single 75 ohm
INPUT plug on a two-way
Signal Splitter (optional).
Connect one end of RF
Coaxial Cable to each of the
OUTPUT plugs on the 75 ohm
Signal Splitter. The two lengths
of RF Coaxial Cable need Ftype connectors (screw-on or
push type) for both ends.
3135 015 05920
Connect one of the Signal
Splitter OUTPUTs to the
INput terminal on the Cable
TV Converter Box. Then route
another connection from the
Cable Converter OUTput terminal to the ANT A Input on
the rear of the TV.
Connect the remaining
Signal Splitter OUTPUT
from the Splitter to the ANT
B Input on the rear of the TV.
HOW TO USE THE INSTALLATION FEATURES
LANGUAGE
BEGIN
Press the MENU button on the remote to show the
on-screen menu.
F
or our Spanish and
French speaking TV owners an on-screen LANGUAGE
option is present. With the
LANGUAGE control you can
set the TV’s on-screen menu to
be shown in either English,
Spanish, or French.
Press the CURSOR
RIGHT ©© button and the
menu will shift highlighting the
LANGUAGE feature.
Press the CURSOR
DOWN ■ button three times
to select the INSTALL menu.
ON SCREEN FEATURES
..
..
SOUND
LANGUAGE
FEATURES
AUTO PROGRAM
INSTALL
TUNER
...
.
INSTALL
..
.
NAME
TV
VCR
ON/O
SWAP
ACC
SOUR
FF
POSIT
1
ESPANOL
ION
FREE
.
INSTALAR
AUTO PROGRAM
..
..
TUNER
CHANNEL EDIT
POWER
CE
UP
...
.
ENGLISH
LANGUAGE
NAME
R
A/V
Press the CURSOR UP
© or DOWN ■ buttons to
select ENGLISH, ESPANOL
(Spanish), or FRANCAIS
(French).
PICTURE
CHANNEL EDIT
LOCATO
ZE
PIP CH
DN
IDIOMA
ESPANOL
FRANCAIS
AUTO PROGRAM
SINTONIA
...
.
NOMBRE
SO
SMAR
T
PICT
SURF
URE
.
INSTALL
..
..
ED. DE CANAL
SMAR
T
MENU UND
Press CURSOR RIGHT
button ©© to highlight the
Language control options.
FRANCAIS
LANGUE
AUTO PROGRAM
SYNTON
CHANNEL EDIT
NOM DU CANAL
VOL
CC
MUT
STAT
US
SLEE
EXIT
2
VCR
RECO
RD
INCR
STER
EO
4
EDIB
TV/V
P
MEDI
TUNE
A/B
MUT
LE
CLOC
SMART HELP
E
CH
K
A/CH
CR
3
R
5
LI
A
AUTO PROGRAM
Remember, the
Language control only
makes the TV’s on-screen
MENU items appear in English,
Spanish, or French text.
It does not change the other
on-screen text features such as
Closed Caption (CC) TV
shows.
BEGIN
Press the MENU button on the remote to show the
on-screen menu.
Y
our TV can automatically
set itself for local area (or
Cable TV) channels. This
makes it easy for you to select
only the TV stations in your
area when the CHANNEL (+),
(–) buttons are pressed.
ON SCREEN FEATURES
..
..
Note: Auto Program will
automatically detect if cable
or antenna channels are being
received and change the
TUNER feature to the correct
setting.
SOUND
LANGUAGE
FEATURES
AUTO PROGRAM
INSTALL
TUNER
...
.
INSTALL
..
.
NAME
LOCATO
TV
ON/O
ACC
SOUR
1
AUTO PROGRAM
TUNER
...
.
INSTALL
AUTO PROGRAM
..
. .
CHANNEL EDIT
POWER
FF
POSIT
CE
UP
LANGUAGE
NAME
R
A/V
SWAP
Press the CURSOR
RIGHT ©© button to start
the Auto Program scanning of
channels
PICTURE
CHANNEL EDIT
VCR
ION
FREE
...
.
INSTALL
TUNER
CABLE
CHANNEL EDIT
12
..
.
ZE
PIP CH
DN
SMAR
T
SMAR
T
PICT
SURF
LANGUAGE
AUTO PROGRAM
TUNER
CHANNEL EDIT
NAME
SO
MENU UND
Press CURSOR DOWN
■ button to highlight the
AUTO PROGRAM control.
Press the CURSOR
RIGHT ©© button and the
menu will shift highlighting the
LANGUAGE feature.
Press the CURSOR
DOWN ■ button three times
to select the INSTALL menu.
URE
VOL
CC
STAT
US
SLEE
EXIT
2
VCR
RECO
RD
INCR
STER
EDIB
TV/V
P
MUT
LE
MEDI
EO
A/B
MUT
CLOC
E
K
CH
A/CH
CR
TUNE
3
R
SMART HELP
LI
A
Try it out. Press the
CHANNEL (+), (–) buttons and see which channels
you can select.
TUNER
Remember, an antenna or cable
TV signal must be first connected to your TV.
BEGIN
Press the CURSOR
DOWN ■ button three times
to select the INSTALL menu.
Press the MENU button on the remote to show the
on-screen menu.
Y
ou need to make sure the
TV is set to pick up either
Cable TV or Antenna signals.
In other words, the TV needs
to know if you want to receive
channels coming from a
Cable TV signal or a normal
Antenna signal connected to
the TV’s ANT Input.
ON SCREEN FEATURES
..
..
LOCATO
TV
VCR
SOUND
LANGUAGE
FEATURES
AUTO PROGRAM
INSTALL
TUNER
CE
D
UP
INSTALL
..
.
ENGLISH
LANGUAGE
ESPANOL
AUTO PROGRAM
TUNER
CHANNEL EDIT
POWER
FF
POSIT
6
SMAR
T
MENU
ON/O
SOUR
...
.
NAME
R
A/V
SWAP
ACC
SOUN
Press the CURSOR
RIGHT ©© button to highlight the TUNER options
Press the CURSOR
DOWN ■ button to highlight
the TUNER control.
© or the CURSOR DOWN
ION
FREE
ZE
SURF
...
.
INSTALL
..
.
LANGUAGE
TUNER
CHANNEL EDIT
DN
...
.
INSTALL
AUTO PROGRAM
NAME
PIP CH
SMAR
T
PICT
CABLE
..
.
LANGUAGE
AUTO PROGRAM
TUNER
CHANNEL EDIT
NAME
URE
CC
STAT
US
EXIT
VCR
RECO
RD
INCR
STER
EO
4
EDIB
TV/V
LE
2
MUT
MEDI
A
LI
A/B
MUT
CLOC
CR
TUNE
R
CABLE
INSTALL
..
LANGUAGE
AUTO PROGRAM
TUNER
NAME
SMART HELP
E
K
.
...
.
CHANNEL EDIT
VOL
P
■ button to select either
CABLE or ANTENNA
PICTURE
NAME
1
Press the CURSOR
RIGHT ©© button and the
menu will shift highlighting the
LANGUAGE feature.
Press the CURSOR UP
CHANNEL EDIT
SLEE
If you want to delete any unwanted channels from the TV’s memory, see the CHANNEL EDIT
section on the next page.
CH
A/CH
3
5
When CABLE is
selected, channels 1-125
are available.
When ANTENNA is selected,
channels 2-69 are available.
.
ANTENNA
HOW TO USE THE INSTALLATION FEATURES
CHANNEL EDIT
BEGIN
Press the MENU button on the remote to show the
on-screen menu.
C
hannel Edit makes it easy
for you to ADD or
DELETE channels from the
list of channels stored in the
TV’s memory.
ON SCREEN FEATURES
Press the CURSOR
DOWN ■ button three times
to select the INSTALL menu.
..
..
SOUND
LANGUAGE
FEATURES
AUTO PROGRAM
INSTALL
TUNER
NAME
LOCATO
TV
VCR
ON/O
ACC
SOUR
POSIT
CE
UP
1
...
.
...
..
INSTALL
..
.
ION
FREE
AUTO PROGRAM
TUNER
CHANNEL EDIT
CHANNEL
NAME
ADD
..
..
ZE
...
..
INSTALL
CHANNEL EDIT
CHANNEL
..
..
12
ADD
PIP CH
CHANNEL
INSTALL
CHANNEL EDIT
..
..
12
ADD
SMAR
T
SO
SMAR
T
PICT
SURF
7
SLEE
EXIT
INCR
STER
2
4
EDIB
EO
TV/V
P
VCR
MUT
LE
MEDI
12
DELETE
6
MUT
STAT
US
RD
CHANNEL
URE
VOL
CC
RECO
Press the CURSOR UP
© or DOWN ■ button to
To clear the screen, press the
STATUS/EXIT button.
...
..
INSTALL
CHANNEL EDIT
LANGUAGE
DN
MENU UND
Press the CURSOR
LEFT §§ button, then the
CURSOR DOWN ■ button to
highlight the ADD/DELETE
option.
ADD or DELETE the channel
from memory.
POWER
FF
Select the channel you
want to ADD or DELETE with
the CH (+) or (–) buttons. (OR,
use the Number buttons.)
Press the CURSOR
DOWN ■ button to highlight
the CHANNEL EDIT control.
R
A/V
SWAP
Press the CURSOR
RIGHT ©© button to highlight
the CHANNEL EDIT options.
PICTURE
CHANNEL EDIT
8
Press the CURSOR
RIGHT ©© button and the
menu will shift highlighting the
LANGUAGE feature.
A/B
CLOC
E
CH
K
A/CH
CR
TUNE
3
R
5
LI
A
NAME
BEGIN
T
he channel NAME feature
allows you to list the
“call” letters of your favorite
stations to their channel numbers when they appear on the
screen. The TV has in it’s memory a list of the 50 most popular channel names. (Example:
ABC, NBC, FOX, etc.) You can
also enter a custom name (up
to four letters or numbers).
Press the MENU button on the remote to show the
on-screen menu.
Press the CURSOR
DOWN ■ button to highlight
the NAME control.
Press the CURSOR
DOWN ■ button three times
to select the INSTALL menu.
Press the CURSOR
RIGHT ©© button to highlight the NAME options area.
Using the CURSOR UP
© or DOWN ■ buttons, scroll
through a list of channel names
provided in the TV’s memory.
ON SCREEN FEATURES
PICTURE
SOUND
LANGUAGE
FEATURES
AUTO PROGRAM
INSTALL
TUNER
...
.
..
..
NAME
8
VCR
SWAP
ACC
R
A/V
ON/O
SOUR
POSIT
CE
UP
1
POWER
FF
ION
FREE
...
.
INSTALL
CHANNEL EDIT
TV
You can also enter a channel
name manually. Press the
CURSOR RIGHT ©© button again, then use the CURSOR UP © and DOWN ■
buttons to scroll through a list
of options for the first digit.
Press the CURSOR RIGHT
©© button and repeat for the
second, third, and fourth digits.
Press the CURSOR
RIGHT ©© button and the
menu will shift highlighting the
LANGUAGE feature.
..
..
LOCATO
OR
Once you have selected a
name for the channel, press
the MENU button to SAVE
the name in the TV’s memory
and to clear the menu from
the screen.
ZE
PIP CH
DN
...
.
INSTALL
LANGUAGE
AUTO PROGRAM
TUNER
CHANNEL EDIT
NAME
12
..
..
LANGUAGE
AUTO PROGRAM
TUNER
CHANNEL EDIT
NAME
.
PERSONAL
SMAR
T
..
..
12:00 PM
STEREO
6
CBS
INSTALL
LANGUAGE
AUTO PROGRAM
TUNER
CHANNEL EDIT
NAME
.
C
SO
MENU UND
SMAR
T
PICT
SURF
7
CC
STAT
US
SLEE
EXIT
RD
INCR
STER
EO
4
EDIB
TV/V
P
VCR
RECO
LE
URE
6
VOL
2
MUT
MEDI
A/B
MUT
CLOC
K
PERSONAL
CH
.
ABC
A/CH
CR
TUNE
.
E
3
R
LI
A
SMART CLOCK
S
mart Clock can automatically set the TV’s onscreen clock. Since the time is
received from a broadcast signal, be sure that a Cable TV
or Antenna signal is present
before attempting to use the
Smart Clock feature.
CBS
ACTS
5
AMC
BEGIN
Press the MENU button on the remote to show the
on-screen menu.
Press the CURSOR
DOWN ■ button three times
to select the INSTALL menu.
ON SCREEN FEATURES
..
..
...
.
INSTALL
PICTURE
SOUND
LANGUAGE
FEATURES
AUTO PROGRAM
INSTALL
TUNER
CHANNEL EDIT
NAME
..
..
Press the CURSOR
RIGHT ©© button and the
menu will shift highlighting the
LANGUAGE feature.
Press the CURSOR
DOWN ■ button to highlight
the SMART CLOCK control.
Press the CURSOR
RIGHT ©© button to start
the SMART CLOCK feature.
Just follow the on-screen
instructions to set the clock.
This TV contains a clock which
can automatically be set
through the SMART CLOCK Feature
AUTO PROGRAM
TUNER
CHANNEL EDIT
NAME
SMART CLOCK
Press ">" to Continue
AUTO
MANUAL
Press " " to select the
time zone that you live in
>
SET TIME
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
Daylight Savings Time
YES
NO
Time was not found on channel
The time is broadcast by certain TV
stations. We suggest trying PBS first
Enter another channel
Set time Manually
Enter the PBS channel
10
Please wait
Press " " to select
>
>
Press " " to select
Press " " to select
Press ">" to Continue
>
Follow these
on-screen
instructions
to set the
Smart Clock
Automatically.
Press ">" to Continue
Press ">" to Continue
Press ">" to Continue
Press ">" to Continue
OR
AUTO
MANUAL
12:30 PM
>
use " " to set AM/PM
>
Press " " to select
Press ">" to Continue
Press ">" to Continue
Note: When setting the
clock manually, use the
number buttons on the
remote to enter the time.
Don’t forget to set AM
or PM with the Cursor
Up button.
The time is broadcast by certain TV
stations. We suggest trying PBS first
Time was found
12:30 PM
Enter the PBS channel
2
use " " to set AM/PM
>
SET TIME
Follow these
on-screen
instructions
to set the
Smart Clock
Manually.
Press ">" to Continue
Press ">" to Continue
Press ">" to Continue
TV AND REMOTE CONTROL OPERATION
TELEVISION
BEGIN
Press the POWER
button to turn the TV ON.
ON SCREEN FEATURES
12:00 PM
STEREO
6
Press the VOLUME + ©
button to increase the sound
level or the VOLUME – §
button to lower the sound level.
Press the CHANNEL UP
▲ or DOWN ▼ button to
select TV channels.
Note: Press three number buttons for any channels 100 or
above.
For example: press “1” then “2”
then “5” for channel 125.
Pressing both buttons at the
same time will display the onscreen menu. Once in the
menu, use these button to make
adjustments or selections.
§
POWER
REMOTE
REMOTE
CONTROL
BATTERY INSTALLATION
T
o load the supplied batteries into the remote:
– VOLUME + ©
Slide the TV/VCR/ACC
mode switch on the remote
control to the TV position and
point the remote at the front
of the TV when sending commands.
CHANNEL
MENU
BEGIN
Point the remote control toward the remote sensor
window on the TV when operating the TV with the remote.
ER
POW
ZE
LOC
N
FREE
ITIO
R
POS
ATO
1. Remove the battery
compartment lid on the
back of the remote.
FF
ON/O
RCE
AV
TV
PIP
UP
CH
DN
3
SOU
AP
SW
VCR
ACC
ART
SM
E
TUR
PIC
ART
F
SUR
SM
ND
SOU
2. Place the batteries (3AA) in the remote. Be
sure the (+) and (-) ends
of the batteries line up
correctly (inside of case is
marked.)
CH
For example:
With the switch in the "TV"
position:
the Menu, CURSOR ©,
©©, §§ and ■ buttons
are used to select and
adjust on-screen TV
features.
With the switch in the
"ACC" position:
the Power, Channel
Number, and Channel
Up (+) /Down (–) buttons
on the remote work with
Cable TV Converters and
some DVD, DSS systems.
With the switch in the
"VCR" position:
the Menu, CURSOR ©,
©©, §§ and ■ buttons
on the remote work Stop,
Play, Pause, and other
VCR features.
Note: For more details on
how the TV remote works
with VCRs and Cable
Converters, see the other
owner's manual supplied with
Remember, You can
press any button on the
front of the TV to turn the TV
ON.
CK
CLO
TUS
STA
CC
CR
TV/V
ER
TUN A/B
EXIT
LTI
MU
IA
MED
EP
SLE
IBLE
CRED
VCR
IN
RD
ECO
EO
TER
S
R
4
Power Button
Press to change the code for the Remote
Locator feature. (Refer to pages 26-27 in the
Owner’s Manual for more details.)
Press to turn the TV (or select VCR/
Cable Converter) ON and OFF.
AV Button
Press to operate Picture-In-Picture features. See "PIP" section (pages 37-42) in
your owner's manual for more details.
PIP Buttons
Press to toggle between the external
Audio/Video input jacks. This button will tune
to the AV 1, AV 2, AV 3 or current tuner channel.
TV/VCR/ACC Mode Switch
Slide to position of TV to control TV functions,
VCR to control VCR functions and ACC for
Cable Converter, DSS, DVD, etc. functions.
Smart Sound Button
POWER
SLEEP
Light Button
TV
AV
ON/OFF
VCR
SWAP
SOURCE
POSITION
FREEZE
PIP CH
UP
DN
ACC
Press to control TV sound levels during program changes or commercial breaks.
Cursor Buttons
Use these buttons to move through the onscreen menu; make selections within the
menu; make adjustments to the menu. Also
used with a VCR for PLAY, FAST FORWARD, REWIND, and STOP. (Refer to page
36 in the Owner’s Manual for more details.)
Press to select from a list of Smart
Picture controls. (Factory preset picture
control levels set for different types of
viewing sources and programs.)
SMART
SMART
SOUND
PICTURE
MENU
SURF
Volume (+), (–) Buttons
Surf Button
Press to select previously viewed channels. You can place up to 10 channels in
memory. Then by pressing the SURF button you can quickly view the select channels. See the “Surf" section (in your other
owner's manual) to see how to select a
series of channels using the Surf button.
When used with a VCR this button will
pause the playback of a tape.
Channel (+), (–) Buttons
Press to adjust the TV sound level.
Press to change the tuned channel.
Mute Button
Press to turn the sound OFF on the TV. Press
again to return the sound to its previous
level.
CC Button
VOL
CH
MUTE
CC
Status/Exit Button
Press to see the current channel number on the
TV screen. Also press to clear the TV screen
after control adjustments.
Sleep Button
Press to set the TV to automatically turn
itself OFF. Also can be used as an Enter button when sending channel commands to
remote controlled cable converters or VCRs.
STATUS
CLOCK
A/CH
A/CH Button
Press to toggle between the currently
viewed channel and the previously
viewed channel.
Clock-TV/VCR Button
Press to select Closed Caption options within
the menu. (Refer to page 17 in the Owner’s
Manual for more details.)
EXIT
VCR RECORD
TV/VCR
TUNER
A/B
INCREDIBLE
MULTI
SURROUND
MEDIA
TV Position: Press for direct entry of
the TIMER feature where you can set
the TV’s clock.
VCR Position: Use to watch a tape, or
make a recording while watching another channel. (Refer to page 36 in the
Owner’s Manual for more details.)
Tuner (A/B) Button
Press to toggle between the ANT “A” and
ANT “B” signals connected to the television’s jack panel.
Multi Media Button
When in the VCR mode, press to start the
recording of a video tape.
The tuned channel number will
always briefly appear when the
TV is first turned ON (and with
channel changes.)
Press the number buttons to select TV
channels. Press three number buttons to
select channels 100 or above. (Press "1",
then "2", then “5” for channel 125.)
Smart Picture Button
Menu Button
Press for the on-screen menu to appear.
Pressing the menu button after menu selections are made will eliminate the menu from
the display.
Press to back light the Menu, Surf,
Cursor, Volume, and Channel buttons.
Number Buttons
VCR-Record Button
SMART HELP
H
A/C
TE
MU
Locator Button
The remote's TV/VCR/ACC
Switch controls how buttons
on the remote are used.
M
VOL
3. Reattach the battery lid.
TV/VCR/ACC MODE
SWITCH
ENU
You can also press the STATUS
button (on the remote) to see
what channel the TV is ON.
Press to toggle between the external input
jacks. This button will tune to the MM 1,
MM 2, and MM 3 channels along with
setting the picture controls to the Smart
Picture setting for Multi Media viewing.
Incredible Stereo Button
Press to toggle between the Mono and
Spatial sound controls. (Expands the
stereo sound for a fuller, more dynamic
listening experience.)