Download Philips TS3259C TV

QUICK USE AND INSTALLATION GUIDE
TABLE OF CONTENTS
11
12
Warning/Precautions ..................................1
Hooking Up Your TV ................................1
Basic TV and Remote Control Operation .................2
How to Use the “INSTALL” Controls ..................3-4
Using the Language Control......................................3
Setting the TV to Auto Program Channels ................3
Setting the TV for a Cable or Antenna Signal...........3
Using the Channel Edit Control ................................4
Setting the Channel Name Control............................4
How to use the Smart Clock control .........................4
3
7
Color Television and Remote Control
For details on product registration, warranty,
and service refer to the other literature included
with your TV information packet.
2
4
8
ANTENNA
•
Getting Started
1
10
9
6
5
Please retain all these materials and keep them
handy for future reference.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD DO NOT EXPOSE THIS UNIT TO RAIN
OR EXCESSIVE MOISTURE.
NOTE: This Quick Use Guide may be used with
other models. Some of the features listed may or
maynot apply to your TV.
BEGIN
OUTDOOR/INDOOR
combination (outdoor
or indoor) antenna
receives normal broadcast
channels 2-13 (VHF) and
14-69 (UHF). Your connection to such an antenna
is easy since there is only
one antenna plug (75Ωohm) on the back of your
TV - and that’s where the
antenna goes.
A
Note: For homes with separate UHF and VHF antennas you will need an optional combiner to connect to
the TV.
U/V Combiner
Push the round end of the
adapter (or antenna) onto the
ANTENNA (ANT “A”) plug on
the rear of the TV. If the round
end of the antenna wire is
threaded, screw it down tight.
If your antenna has a
round cable connector (75
ohm) on the end, then you're
ready to connect it to the TV.
If your antenna has flat twinlead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300 to 75
ohm adapter.
UH
F
30
0Ω
S-VIDEO
VIDEO
VHFVH
L
AUDIO
ANT "A"
75
R/MONO
F
IN-2
IN-1
OUT
Back of TV
OR
R
TE
AP
00
Ω
AD
Remember,
be sure to set the
TV for the type signal you've connected (see "TUNER"
on page 3 of this
Guide.)
-3
75
To order any
optional accessory
contact your dealer
or call the toll-free
accessory ordering
number:
1-800-851-8885
75-300 Ohm Adapter
Combination VHF/UHF Antenna
(Outdoor or Indoor)
SMART
HELP
300 to 75Ω
Adapter
(483521827003)
1
2
Twin Lead
Wire
ANT "A"
75
S-VIDEO
VIDEO
L
ANT "A"
75
AUDIO
R/MONO
IN-2
OR
IN-1
OUT
Back of TV
Round Cable
75Ω Ohm
CABLE TV
CABLE INPUT/CONVERTER
Y
our Cable TV input
into your home may be
a single (75 ohm) cable, or
a Converter Box installation. In either case the
connection to the TV is
very easy. Just put the
threaded end of the cable
signal to the TV's antenna
plug and screw it down
hand tight.
SMART
HELP
BEGIN
If your Cable TV signal is a single round cable (75
ohm) then you're ready to connect to the TV.
If you have a Cable TV
Converter Box:
Connect the Cable TV signal to
the Cable Signal IN(put) plug
on the Converter.
Connect the Cable TV
cable to the ANTENNA (ANT
“A”) plug on the TV.
If you have a Cable TV
Converter Box:
Connect the OUT(put) plug
from the Converter to the
ANTENNA (ANT “A”) plug on
the TV (connecting cable supplied with the Converter.)
2
ANT "A"
75
Cable TV Signal
Cable TV
Company
Remember,
set the TV for the
type signal you've
just connected (see
“TUNER” page 3
of this Set-Up
Guide.)
S-VIDEO
VIDEO
L
ANT "A"
75
BASIC CONNECTION
T
he basic Antenna, or
Cable TV, to VCR to
TV connection is shown to
the right. For more information on other hookups
(possible when Cable
Converter/Descrambler
boxes are included) refer
to your accessory VCR
and Cable Converter
Owner's Manual for
details.
IN-1
OUT
Back of TV
OUT
Round Cable
75Ω Ohm
Cable TV Converter
Box Connection
VCR TO TV
AUDIO
R/MONO
IN-2
OR
IN
Your TV can set
itself to select only
the channel numbers
on your Cable system (see “AUTO
PROGRAM" page
3). If you use a
Cable Converter box,
set the TV to the
same channel as the
converter's CH 3/4
switch (on the rear of
the converter.)
1
BEGIN
Connect the OUT TO TV
plug on the VCR to the
ANTENNA (ANT “A”) plug
on the TV (connecting cable
supplied with the VCR.)
Connect your
Antenna or Cable TV signal
to the IN FROM ANT(enna)
plug on the VCR.
Refer to the Owner's
Manual included with your
VCR for other possible connections and TV/VCR operating details.
300 to 75Ω Ohm
Adapter
Outdoor VHF/UHF
Antenna
OR
IN FROM ANT.
OUT TO TV
Round Cable
75Ω Supplied
with VCR
ANT "A"
75
S-VIDEO
VIDEO
L
ANT "A"
75
AUDIO
R/MONO
IN-2
IN-1
OUT
Cable TV signal
Back of TV
VCR
1
3135 015 12981
TV AND REMOTE CONTROL OPERATION
TELEVISION
BEGIN
Press the POWER
button to turn the TV ON.
12:00 PM
STEREO
6
Press the VOLUME + ©
button to increase the sound
level or the VOLUME – §
button to lower the sound level.
Note: Always press two number buttons on the remote
when selecting channels under
100. Press three number buttons for any channels 100 or
above. For example: press "0"
then "6" for channel 6 or, press
“1” then “2” then “5” for channel 125.
Pressing both buttons at the
same time will display the onscreen menu. Once in the
menu, use these button to make
adjustments or selections.
– VOLUME + ©
§
POWER
REMOTE
BATTERY INSTALLATION
T
o load the supplied batteries into the remote:
Slide the TV/VCR/ACC
mode switch on the remote
control to the TV position and
point the remote at the front
of the TV when sending commands.
Press the CHANNEL UP
▲ or DOWN ▼ button to
select TV channels.
CHANNEL
MENU
BEGIN
Point the remote control toward the remote sensor
window on the TV when operating the TV with the remote.
ER
POW
1. Remove the battery
compartment lid on the
back of the remote.
ZE
N
FREE
ITIO
POS
EP
SLE
FF
ON/O
E
URC
AV
TV
PIP
UP
CH
DN
VCR
ACC
ART
SM
E
2. Place the batteries (2AA) in the remote. Be
sure the (+) and (-) ends
of the batteries line up
correctly (inside of case is
marked.)
TUR
PIC
ART
ND
SOU
ENU
M
CH
VOL
With the switch in the "TV"
position:
the Menu, CURSOR ©,
©©, §§ and ■ buttons
are used to select and
adjust on-screen TV
features.
With the switch in the
"ACC" position:
the Power, Channel
Number, and Channel
Up (+) /Down (–) buttons
on the remote work with
Cable TV Converters.
With the switch in the
"VCR" position:
the Menu, CURSOR ©,
©©, §§ and ■ buttons
on the remote work Stop,
Play, Pause, and other
VCR features.
Note: For more details on
how the TV remote works
with VCRs and Cable
Converters, see the other
owner's manual supplied with
your TV.
TUS
STA
CC
K
LOC
C
CR
TV/V
LTI
MU
EXIT
IA
MED
VCR
LE
EDIB
R
INC
ORD
REC
REO
STE
4
CC Button
Sleep Button
For example:
H
A/C
TE
MU
Press to set the TV to automatically turn
itself OFF. Also can be used as an Enter button when sending channel commands to
remote controlled cable converters or VCRs.
The remote's TV/VCR/ACC
Switch controls how buttons
on the remote are used.
F
SUR
SM
3. Reattach the battery lid.
TV/VCR/ACC MODE
SWITCH
3
SO
AP
SW
POWER
SLEEP
Press to select Closed Caption options
within the menu. (Refer to the Owner’s
Manual for details.)
Power Button
Press to turn the TV (or select VCR/
Cable Converter) ON and OFF.
Status/Exit Button
Press to see the current channel number on the
TV screen. Also press to clear the TV screen
after control adjustments.
TV
AV
STATUS/EXIT
CC
TV/VCR-CLOCK
Clock-TV/VCR Button
VCR
VCR
INCREDIBLE
MULTI
RECORD
STEREO
MEDIA
A/CH
TV/VCR/ACC Mode Switch
Slide to position of TV to control TV functions,
VCR to control VCR functions and ACC for
Cable Converter, DSS, DVD, etc. functions.
ACC
AV Button
When in TV mode, press for direct entry
of the TIMER feature were you can set
the TV’s clock. When in the VCR mode,
this button can be used to quickly toggle
between the VCR A/V connection and
the last viewed TV channel.
Light Button
Press to toggle between the external
Audio/Video input jacks. This button will tune
to the AV 1, AV 2 or current tuner channel.
Press to back light the Menu, Surf,
Cursor, Volume, and Channel buttons.
VCR-Record Button
SMART
When in the VCR mode, press to start the
recording of a video tape.
SOUND
PICTURE
MENU
SURF
Incredible Stereo Button
Press to toggle between the Mono and Spatial
sound controls. (Expands the stereo sound for a
fuller, more dynamic listening experience.)
SMART
A/CH Button
Press to toggle between the currently
viewed channel and the previously
viewed channel.
Multi Media Button
Press to toggle between the external input
jacks. This button will tune to the MM 1,
MM 2 channels along with setting the
picture controls to the Smart Picture setting for Multi Media viewing.
Smart Sound Button
Press to control TV sound levels during program changes or commercial breaks.
Number Buttons
Menu Button
VOL
Press for the on-screen menu to appear.
Pressing the menu button after menu selections are made will eliminate the menu from
the display.
CH
MUTE
Press the number buttons to select TV
channels. Press two number buttons to
select single digit channels. For example:
press "0" then "6" for channel 6.
Smart Picture Button
Press to select from a list of Smart
Picture controls. (Factory preset picture
control levels set for different types of
viewing sources and programs.)
Cursor Buttons
Use these button to move through the onscreen menu; make selections within the
menu; make adjustments to the menu. Also
used with a VCR for PLAY, FAST FORWARD, REWIND, and STOP.
Surf Button
Press to select previously viewed channels. You can place up to 10 channels in
memory. Then by pressing the SURF button you can quickly view the select channels. See the “Surf" section (in your other
owner's manual) to see how to select a
series of channels using the Surf button.
Volume (+), (–) Buttons
Press to adjust the TV sound level.
Mute Button
Press to turn the sound OFF on the TV. Press
again to return the sound to its previous
level.
Channel (+), (–) Buttons
Press to change the tuned channel.
SMART HELP
Remember, You can
press any button on the
front of the TV to turn the TV
ON.
The tuned channel number will
always briefly appear when the
TV is first turned ON (and with
channel changes.)
You can also press the STATUS
button (on the remote) to see
what channel the TV is ON.
2
HOW TO USE THE INSTALLATION FEATURES
LANGUAGE
BEGIN
Press the MENU button on the remote to show the
on-screen menu.
F
or our Spanish and
French speaking TV owners an on-screen LANGUAGE
option is present. With the
LANGUAGE control you can
set the TV’s on-screen menu to
be shown in either English,
Spanish, or French.
Press the CURSOR
RIGHT ©© button and the
menu will shift highlighting the
LANGUAGE feature.
Press the CURSOR
DOWN ■ button four times to
select the INSTALL menu.
Press the CURSOR UP
..
..
.
PICTURE
LANGUAGE
SOUND
TUNER
FEATURES
AUTO PROGRAM
INSTALL
CHANNEL EDIT
...
.
INSTALL
..
..
.
SLEEP
TV
VCR
A/V
STATUS
VCR
INCR
ACC RECORD
STER
1
EDIB
EO
POWER
/EXIT
LE
CC
MUL
TI
MED
TV/VC
R-CLOC
...
.
ENGLISH
LANGUAGE
ESPANOL
..
..
.
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
K
SMAR
T
D
.
INSTALAR
TUNER
A/CH
IA
select ENGLISH, ESPANOL
(Spanish), or FRANCAIS
(French).
REVIEW
SMART CLOCK
MENU
IDIOMA
ESPANOL
FRANCAIS
SINTONIA
AUTO PROGRAM
...
.
NOMBRE
SMART CLOCK
PICT
URE
VOL
FRANCAIS
LANGUE
SYNTON
AUTO PROGRAM
CHANNEL EDIT
NOM DU CANAL
SMART CLOCK
SMART HELP
E
CH
4
.
INSTALL
..
..
.
ED. DE CANAL
SMAR
T
SURF
MUT
Language control options.
© or DOWN ■ buttons to
NAME
SOUN
Press CURSOR RIGHT
©© button to highlight the
3
2
AUTO PROGRAM
5
Remember, the
Language control only
makes the TV’s on-screen
MENU items appear in
English, Spanish, or French
text. It does not change the
other on-screen text features
such as Closed Caption (CC)
TV shows.
Pressing the STATUS/EXIT
button after making adjustments to the TV will remove
the menu from the screen.
BEGIN
Press the MENU button on the remote to show the
on-screen menu.
Y
our TV can automatically
set itself for local area (or
Cable TV) channels. This
makes it easy for you to select
only the TV stations in your
area when the CHANNEL (+),
(–) buttons are pressed.
..
..
.
PICTURE
LANGUAGE
SOUND
TUNER
FEATURES
AUTO PROGRAM
INSTALL
CHANNEL EDIT
...
.
INSTALL
..
...
SMART CLOCK
SLEEP
TV
VCR
A/V
STATUS
VCR
INCR
STER
1
EO
EDIB
LE
/EXIT
MUL
TI
MED
IA
POWER
CC
TV/VC
R-CLOC
Press the CURSOR
RIGHT ©© button to start
the Auto Program scanning of
channels
REVIEW
NAME
ACC RECORD
LANGUAGE
TUNER
AUTO PROGRAM
...
.
INSTALL
AUTO PROGRAM
..
. .
CHANNEL EDIT
NAME
...
.
INSTALL
TUNER
CABLE
CHANNEL
12
..
...
PLEASE WAIT
SMART CLOCK
K
A/CH
SMAR
T
SO
MENU UND
SMAR
T
PICT
SURF
Press CURSOR DOWN
■ button to highlight the
AUTO PROGRAM control.
Press the CURSOR
RIGHT ©© button and the
menu will shift highlighting the
LANGUAGE feature.
Press the CURSOR
DOWN ■ button four times to
select the INSTALL menu.
URE
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
VOL
MUT
E
CH
3
2
SMART HELP
Try it out. Press the
CHANNEL (+), (–) buttons and see which channels
you can select.
TUNER
Remember, an antenna or cable
TV signal must be first connected to your TV.
BEGIN
Y
Press the CURSOR
RIGHT ©© button and the
menu will shift highlighting the
LANGUAGE feature.
Press the CURSOR
RIGHT ©© button to highlight the TUNER options
Press the CURSOR
DOWN ■ button to highlight
the TUNER control.
© or the CURSOR DOWN
Press the CURSOR UP
..
..
.
REVIEW
PICTURE
LANGUAGE
SOUND
TUNER
FEATURES
AUTO PROGRAM
INSTALL
CHANNEL EDIT
NAME
SMART CLOCK
SLEEP
TV
VCR
A/V
STATUS
VCR
INCR
ACC RECORD
STER
1
Press the CURSOR
DOWN ■ button four times to
select the INSTALL menu.
Press the MENU button on the remote to show the
on-screen menu.
ou need to make sure the
TV is set to pick up either
Cable TV or ANtenna signals.
In other words, the TV needs
to know if you want to receive
channels coming from a
Cable TV signal or a normal
Antenna signal connected to
the TV’s ANT Input.
EO
EDIB
6
SMAR
T
LE
MED
/EXIT
MUL
TI
IA
POWER
CC
TV/VC
R-CLOC
...
.
INSTALL
..
...
ENGLISH
LANGUAGE
ESPANOL
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
K
A/CH
SO
MENU UND
SMAR
T
PICT
SURF
URE
...
.
INSTALL
..
..
.
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
...
.
INSTALL
LANGUAGE
CABLE
..
..
.
LANGUAGE
TUNER
CHANNEL EDIT
NAME
SMART CLOCK
4
CABLE
■ button to select either
CABLE, AUTO or
ANTENNA
...
.
INSTALL
..
.. ...
..
..
..
LANGUAGE
TUNER
.
AUTO
AUTO PROGRAM
CHANNEL EDIT
INSTALL
NAME
SMART CLOCK
LANGUAGE
E
CH
2
.
AUTO PROGRAM
VOL
MUT
If you want to delete any unwanted channels from the TV’s memory, see the CHANNEL EDIT
section on the next page.
3
5
SMART HELP
When CABLE is
selected, channels 1-125
are available.
3
When ANTENNA is selected,
channels 2-69 are available.
TUNER
.
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
ANTENNA
HOW TO USE THE INSTALLATION FEATURES
CHANNEL EDIT
BEGIN
Press the CURSOR
RIGHT ©© button and the
menu will shift highlighting the
LANGUAGE feature.
Press the MENU button on the remote to show the
on-screen menu.
C
hannel Edit makes it easy
for you to ADD or
DELETE channels from the
list of channels stored in the
TV’s memory.
Press the CURSOR
DOWN ■ button four times to
select the INSTALL menu.
..
..
.
A/V
INCR
ACC RECORD
STER
1
STATUS
PICTURE
LANGUAGE
SOUND
TUNER
FEATURES
AUTO PROGRAM
INSTALL
CHANNEL EDIT
...
.
EO
EDIB
LE
CC
MUL
TI
MED
IA
TV/VC
R-CLOC
...
..
INSTALL
..
..
.
POWER
/EXIT
ADD or DELETE the channel
from memory.
REVIEW
SLEEP
TV
VCR
© or DOWN ■ button to
To clear the screen, press the
STATUS/EXIT button.
SMART CLOCK
VCR
...
..
INSTALL
CHANNEL EDIT
LANGUAGE
TUNER
..
..
AUTO PROGRAM
CHANNEL EDIT
CHANNEL
NAME
ADD
SMART CLOCK
CHANNEL
...
..
INSTALL
CHANNEL EDIT
..
..
12
ADD
K
A/CH
CHANNEL
INSTALL
CHANNEL EDIT
12
ADD
SMAR
T
SOUN
MENU
D
SMAR
T
PICT
SURF
Press the the CURSOR
DOWN ■ button to highlight
the ADD/DELETE option.
Press the CURSOR UP
Select the channel you
want to ADD or DELETE with
the CH (+) or (–) buttons. (OR,
use the Number buttons.)
Press the CURSOR
DOWN ■ button to highlight
the CHANNEL EDIT control.
NAME
8
Press the CURSOR
RIGHT ©© button to highlight
the CHANNEL EDIT options.
..
..
CHANNEL
12
DELETE
URE
6
VOL
MUT
E
CH
3
2
7
8
6
NAME
5
BEGIN
T
he channel NAME feature
allows you to list the
“call” letters of your favorite
stations to their channel numbers when they appear on the
screen. The TV has in it’s memory a list of the 50 most popular channel names (Example:
ABC, NBC, FOX, etc.) You can
also center a custom name (up
to four digits).
Press the MENU button on the remote to show the
on-screen menu.
Press the CURSOR
DOWN ■ button to highlight
the NAME control.
Press the CURSOR
DOWN ■ button four times
to select the INSTALL menu.
Press the CURSOR
RIGHT©© button to highlight the NAME options area.
PICTURE
LANGUAGE
SOUND
TUNER
FEATURES
AUTO PROGRAM
INSTALL
CHANNEL EDIT
...
.
..
..
.
SMART CLOCK
VCR
A/V
INCR
STER
EO
EDIB
LE
MED
/EXIT
MUL
TI
IA
POWER
CC
TV/VC
R-CLOC
K
A/CH
SMAR
T
TUNER
AUTO PROGRAM
CHANNEL EDIT
12
NAME
SMART CLOCK
..
..
.
TUNER
AUTO PROGRAM
CHANNEL EDIT
PICT
SURF
SMART CLCOK
6
.
PERSONAL
E
5
SMART CLOCK
S
mart Clock can automatically set the TV’s onscreen clock. Since the time is
received from a broadcast signal, be sure that a Cable TV
or Antenna signal is present
before attempting to use the
Smart Clock feature.
6
SET TIME
Press the MENU button on the remote to show the
on-screen menu.
..
..
.
PICTURE
LANGUAGE
SOUND
TUNER
FEATURES
AUTO PROGRAM
INSTALL
SMART CLCOK
CHANNEL EDIT
>
..
..
.
Press ">" to Continue
AUTO
MANUAL
>
" to set AM/PM
Press the CURSOR
DOWN ■ button to highlight
the SMART CLOCK control.
Press the CURSOR
RIGHT ©© button to start
the SMART CLOCK feature.
Just follow the on-screen
instructions to set the clock.
LANGUAGE
TUNER
CHANNEL EDIT
NAME
SMART CLOCK
Press ">" to Continue
Time was not found on channel
The time is broadcast by certain TV
stations. We suggest trying PBS first
Daylight Savings Time
YES
NO
Enter another channel
Set time Manually
Enter the PBS channel
10
Please wait
" to select
Press ">" to Continue
Press ">" to Continue
Note: When setting the
clock manually, use the
number buttons on the
remote to enter the time.
Don’t forget to set AM or
PM with the Cursor UP or
DOWN button.
4
The time is broadcast by certain TV
stations. We suggest trying PBS first.
OR
Press "
" to select
Press ">" to Continue
Time was found
12:30 PM
Enter the PBS channel
10
Press "
Press ">" to Continue
Press ">" to Continue
" to set AM/PM
>
>
>
Press "
Press ">" to Continue
Press the CURSOR
RIGHT ©© button and the
menu will shift highlighting the
LANGUAGE feature.
AUTO PROGRAM
Press "
12:30 PM
" to set AM/PM
CBS
This TV contains a clock which
can automatically be set
through the SMART CLOCK Feature
SET TIME
Press ">" to Continue
.
>
>
...
.
>
>
Press "
" to select
Press ">" to Continue
Press the CURSOR
DOWN ■ button four times to
select the INSTALL menu.
INSTALL
REVIEW
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
>
.
C
NAME
BEGIN
Press " " to select the
time zone that you live in
AUTO
MANUAL
Press "
CHANNEL EDIT
7
SMART CLOCK
Follow these
on-screen
instructions to
set the
SmartClock
Manually
AUTO PROGRAM
AMC
NAME
Follow these
on-screen
instructions to
set the
SmartClock
Automatically
TUNER
ACTS
>
4
ABC
3
2
LANGUAGE
URE
CH
6
.
PERSONAL
NAME
..
..
.
12:00 PM
STEREO
6
CBS
INSTALL
LANGUAGE
SMAR
T
VOL
MUT
...
.
INSTALL
LANGUAGE
SO
MENU UND
You can also enter a channel
name manually. Press the
CURSOR RIGHT ©© button again, then use the CURSOR UP © and DOWN ■
buttons to scroll through a list
of options for the first digit.
Press the CURSOR RIGHT
©© button and repeat for the
second, third, and fourth digit.
Press the STATUS/EXIT
button to clear the menu from
the screen
>
1
STATUS
VCR
...
.
INSTALL
NAME
ACC RECORD
OR
Once you have selected a
name for the channel, press
the MENU button to SAVE
the name in the TV’s memory.
REVIEW
SLEEP
6
through a list of channel names
provided in the TV’s memory.
Press the CURSOR
RIGHT ©© button and the
menu will shift highlighting the
LANGUAGE feature.
..
...
TV
Using the CURSOR UP
© or DOWN ■ buttons, scroll
>
4
Press ">" to Continue