Download Vivitar ViviCam 3740 Digital Camera

Digital Camera User Manual
Problem
Possible cause
Windows ME
and Windows
2000: when
the USB cable
is unplugged
from the PC,
an "Unsafe
Removal
Device
Detected" error
message
appears.
Procedure:
When removing
USB devices, it is
A. Right-click the Unplug or Eject hardware icon at
recommended that
the bottom-right of your computer screen.
users follow the
B. Left-click the Unplug or Eject hardware text box
"Safe Removal of
to open the 'Unplug or Eject Hardware' screen.
USB Device"
C. From the 'Unplug or Eject Hardware' screen,
procedure.
select the device to be disconnected and then
click the Stop button to bring up the 'Stop a
Hardware device' confirmation screen.
D. From the 'Stop a Hardware device' confirmation
screen, select the device to be stopped and click
OK to bring up the 'Safe To Remove Hardware'
confirmation.
E. Disconnect the Digital Camera from your PC.
Solution
Images lose
formatting data
during image
capture in "PC
Camera"
mode.
If your hard disk's
DMA setting is
turned off images
may lose formatting
data during image
capture. (Windows
98 and Windows
ME only.)
Please check to make sure your hard drive's DMA
setting is enabled, as follows:
1.
2.
3.
4.
5.
54
From the Windows Start menu, select Settings,
then Control Panel.
In the Control Panel double-click System, and
then click the Device Manager tab.
Select your hard drive from the list, and then
click Properties.
Click the Settings tab.
Make sure the box marked DMA is checked. If
not, check the box to ensure that your hard drive
will protect image attributes during capture.