Download Konica Revio KD-300Z Digital Camera

Transcript

Using Color Mode for B&W and Sepia Images
White Balance
In addition to the normal color picture mode, you can also take pictures
in black and white (B/W) or sepia tone (Sepia).
An image’s color will change depending on the kind of light source
present. Select the white balance as follows to compensate for different
light sources.
¶ B/W and sepia picture modes cannot be selected when image quality is set
for uncompressed TIFF-RGB [T] format.
<Operation>
4 Press the “%” or “ﬁ” button to
select either [SEPIA] or [B/W]
mode.
1 Press the “MENU” button.
[AUTO] (default) In this mode, the white balance is set automatically by
the camera.
[
]
[
]
Bright sun
Incandescent light bulbs (Tungsten)
[
]
Cloudy weather
[
]
Fluorescent light
[PRESET]
2 Press the “#” button to select
], then press the “ ”
[
button to confirm the selection.
5 Press the “@” button.
Use this setting when you wish to set the white balance
manually. Instructions for setting the white balance can
be found on page 33.
<Operation>
1 Press the “MENU” button.
3 Select [COLOR MODE], then
press the “#” button.
6 Press the “MENU” button
twice to turn off the menu
display.
Display
appearance
when
[SEPIA]
mode is
selected.
2 Press the “#” button and
], then press the
select [
“ ” button to confirm the
selection.
3 Press “%” or “ﬁ” button to
select [WB MODE], then press
the “#” button.
4 Press “%” or “ﬁ” button to
select the desired white
], [
],
balance mode ([
], or [
]).
[
7 Press the shutter release
button to take the picture.
30
名称未設定-9
31
Page 30-31
2001.7.6, 6:09 PM
Adobe PageMaker 6.5J/PPC

Related documents