Download Sunfire B1600 Switch User Manual

Transcript
Default Setting
There is no default line.
Command Mode
Global Configuration
Command Usage
Telnet is considered a virtual terminal connection and will be shown as Vty in
screen displays such as show users.
Example
To enter console line mode, enter the following command:
Console(config)#line console
Console(config-line)#
Related Commands
show line (4-68)
show users (4-44)
4.3.6.2
login
Use this command to enable password checking at login. Use the no form to disable
password checking and allow connections without a password.
Syntax
login [local]
no login
local – Selects local password checking. Authentication is based on the user
name specified with the username command.
Chapter 4
Command-Line Reference
4-63