Download Philips 929 Cell Phone User Manual

Activate/deactivate the silent mode
If you do not want your phone to ring when you receive a call, activate the silent ringer.
If you receive a call while the silent mode is activated, the
symbol flashes, the green
LED flashes quickly, and the display shows Incoming call, but the phone does not ring.
In idle screen:
• Press
, select the Settings menu, Sounds , Ringer volume and
move the Pilot Key to silent.
Press
to confirm.
The ringer is deactivated. To reactivate the ringer, repeat the above sequence and select
the required volume.
L NOTE
Silent mode can be assigned to a hotkey (see page 41)
Activate/deactivate the vibrator
If you have the Vibra battery and if you have set the function, your phone vibrates when you
receive an incoming call.
In idle screen:
• Press
, select Settings. Select Sounds (confirm) then select
Vibrator.
Move the Pilot Key to select On or Off and press to confirm.
Using the Vibra battery doesn’t mute the ringer. If you want to mute it and keep only the
vibrator function active, set the quick setting Silence .
L NOTES:
1.
2.
The Vibrator option is only available if a vibrating battery is installed (see batteries page 56).
The Vibra Setting is independent from the ringer. You can activate both at the same time.
Reading your GSM phone number
In idle screen:
.
• Press
• In the Names menu, move the Pilot Key until you reach Own Number.
Your phone number is displayed if it is present on your SIM card. If not, then enter the
number, then press
to save it.
L NOTE:
If your own number has been stored in the Names list, you can read it during a call. See “Consulting the
Names list”. page 20.
Using your phone
21