Download Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Wireless Office Headset User Manual

Part 5 – GPIO AT Commands
Chapter 15 – GPIO AT Commands
#GPIOTRIGGER – Configure the GPIO pin and trigger type
Description:
Syntax:
Values:
Responses:
Examples:
Configure the GPIO pin and trigger type.
AT#GPIOTRIGGER=<parameter1>,<parameter2>
parameter 1 (GPIO pin)
1 - GPIO Port 1
2 - GPIO Port 2
3 - GPIO Port 3
4 - GPIO Port 4
5 - GPIO Port 5
parameter 2 (trigger type)
0 - Trigger at (or above for analog) (default for backwards compatibility)
1 - Trigger on active to inactive
2 - Trigger on inactive to active
3 - Trigger on both edges
4 - Trigger at (or below for analog)
(Default is 0)
\r\n#GPIOTRIGGER: VALUE1,VALUE2\r\n
\r\nOK\r\n
\r\nERROR\r\n
send: AT#GPIOTRIGGER=1,1\r
reply:\r\nOK\r\n
send: AT#GPIOTRIGGER=1\r
reply: \r\n#GPIOTRIGGER: 1,1\r\n
reply:\r\nOK\r\n
send: AT#GPIOTRIGGER=2,2\r
reply: \r\nOK\r\n
send: AT#GPIOTRIGGER=2\r
reply: \r\n#GPIOTRIGGER: 2,2\r\n
reply:\r\nOK\r\n
Universal IP AT Commands Reference Guide (Document S000457K)
90