Download Lanner electronic FW-7890 Network Card User Manual

a MIDI control change number from CC#1 through CC#31, CC#64 through CC#95, or Pitch
Bend. Each controller can also be individually set to enable (“CC”) or disable (“cc”). You cannot adjust the value of a disabled parameter.
Power on setup:
You can specify the style and the banks that will be selected when the power is turned on.
Backup:
Sampled video data and edited clip settings can be backed up to a DV camera or other external DV storage device. Global settings, style data and motion sequences (individually or
in blocks of ten) can be backed up to a MIDI filer, sequencer or other MIDI storage device.
The MIDI device must be able to initiate and send a dump request message.
Backing up video data to an external device
Sampled video together with its management data and clip data can be backed up to a DV
device in a single operation.
1 Enter Utility mode.
2 Press the EDIT key to select “Backup,” and press the YES/WRITE key.
3 Select “Video data,” and press the YES/WRITE key.
28