Download Kenwood BLM80 Blender User Manual
Transcript
Type BLM80 instructions English w∂¸´ 2-9 17 - 10 1 1 bq 2 3 3 4 br 5 6 bk bl bm bn bo 4 bp 7 8 9 2 bs Your Blend-X PRO blender has 6 pre-set programmes available for all core blending tasks plus the flexibility of variable speed and pulse for total control. Each programme has been set to provide the perfect consistency every time, whether its puréeing ingredients for soups, crushing ice for cocktails, blending breakfast smoothies, grinding coffee or preparing salsa. ● ● ● before using your Kenwood appliance Read these instructions carefully and retain for future reference. Remove all packaging and any labels. Wash the parts: see ‘care and cleaning’. safety IMPORTANT: HOT BLENDING INSTRUCTIONS To minimise the possibility of scalding when blending hot ingredients keep hands and other exposed skin away from the lid to prevent possible burns. The following precautions must be observed: ● CAUTION: Blending very hot ingredients may result in hot liquid and steam being forced suddenly past the lid or filler cap 1. ● We recommend that hot ingredients are allowed to cool before blending. ● NEVER exceed 1200ml / 5 cups capacity if processing hot liquids, such as soups (refer to the markings on the goblet). ● ALWAYS use the pre-set “Soup” program bl for blending hot liquids and NEVER use the pulse setting. ● Liquids which tend to foam such as milk, should be limited to a maximum capacity of 1000ml/4 cups. ● Take care when handling the blender as the goblet and its contents will be very hot. ● Take particular care when removing the lid. The lid is designed to be a tight fit to prevent leakage. If necessary protect your hands with a cloth or oven gloves when handling. ● Ensure the goblet is securely attached to the base and when removing from the appliance, guide the base and ensure it is removed together with the goblet. ● Ensure that the lid and filler cap are securely in place before every blending operation. 2 ● ● Always ensure that the vents in the filler cap are clear before every blending operation q. When fitting the lid to the goblet always ensure that the lid and goblet rim are clean and dry to ensure a good seal and prevent spillage. safety ● Switch off and unplug: before fitting or removing parts; ● when not in use; ● before cleaning. Never fit the blade unit to the power unit without the blender goblet fitted. Ensure the cord is fully unwound from the cord storage device s before using the blender. Always unplug the appliance before putting your hands or utensils in the goblet. The blender lid must be fitted when using the stir stick in the goblet. Only use the stir stick r for processing cold ingredients. DO NOT use when processing hot liquids. Always take care when handling the blade assembly and avoid touching the cutting edge of the blades when cleaning. Only operate the blender with the lid in place. Only use the goblet with the blade assembly supplied. Never let the power unit, cord or plug get wet. Never use a damaged appliance. Get it checked or repaired: see ‘service and customer care’. Never use an unauthorised attachment. SCALD RISK: Hot ingredients should be allowed to cool to room temperature before blending. Never leave the appliance unattended when it is operating. ● ● ● ● ● ● ● ● ● ● ● ● ● ● 3 ● When removing the blender from the power unit: wait until the blades have completely stopped; ● don’t accidentally unscrew the goblet from the blade assembly. Never run the blender empty. Never blend more than the maximum capacity stated in the recommended speed chart. To ensure long life of your blender, do not run it for longer than 3 minutes. Smoothie recipes - never blend frozen ingredients that have formed a solid mass during freezing, break it up before adding to the goblet. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children. Do not process hard spices such as Nutmeg or Turmeric root as they may damage the blade. Don’t use the blender as a storage container. Keep it empty before and after use. Always use the blender on a secure, dry level surface. Never place this appliance on or near a hot gas or electric burner or where it could touch a heated appliance. Important - The skirt on the base of the goblet is fitted during manufacture and no attempt should be made to remove it. Misuse of your blender can result in injury. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions. ● ● ● ● ● ● ● ● ● ● ● ● ● ● 4 ● ● ● ● ● ● to use your blender before plugging in Make sure your electricity supply is the same as the one shown on the underside of the appliance. 1 Fit the sealing ring 4 into the blade unit 5 - ensuring the seal is located correctly in the grooved area. Then fit the blade unit into the goblet 3. ● Leaking will occur if the seal is damaged or incorrectly fitted. 2 Screw the blade base 6 onto the goblet – ensuring the blade assembly is fully tightened. Refer to the graphics on the side of the blade base as follows: Important – UK only The wires in the cord are coloured as follows: Green and Yellow = Earth, Blue = Neutral, Brown = Live. The appliance must be protected by a 13A approved (BS1362) fuse. WARNING: THIS APPLIANCE MUST BE EARTHED. - unlocked position Note: For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service). If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet. This appliance conforms to EC directive 2004/108/EC on Electromagnetic Compatibility and EC regulation no. 1935/2004 of 27/10/2004 on materials intended for contact with food. 3 4 5 6 ● ● 7 8 ● key 1 2 3 4 5 6 7 8 9 k l m n o p q r s filler cap lid goblet sealing ring blade unit blade base Power On indicator speed + pulse control power unit drinks programme button soups programme button ice crush programme button fine chop programme button coarse chop programme button rinse programme button vents stir stick cord storage device ● ● ● - locked position Put your ingredients into the goblet. Fit the filler cap to the lid and push down to secure. Fit the lid by pushing down until secure. Place the blender onto the power unit. Ensure the cord is fully unwound from the cord storage device before using the blender. The appliance will not work if the blender is incorrectly fitted. Plug in and the Power On indicator 7 will light up. Note: The Power On indicator will flash if the goblet is not fitted to the power unit. Select a speed (refer to the recommended speed chart). Choose one of the following options: Programme buttons:- Turn the speed control to the ‘On’ position and all the buttons will light up. Press the required programme button and the lights on the other buttons will go out and the programme will start. The blender will switch off automatically at the end of the programme time. If you wish to stop before the programme time has elapsed, press the selected programme button again. Manually selected a speed by turning the speed control until the required speed is reached. At the end of blending return the speed control to “O” before removing the blender. Do not remove the goblet until the blades have stopped rotating and the speed control is in the ‘O’ position. (P) Pulse – operates the motor in a start/stop action. The pulse will operate for as long as it is held in position. Refer to the troubleshooting section if you experience any problems with the operation of the blender. 5 to use the stir stick ● 1. Fit the lid to the goblet and remove the filler cap. DO NOT use the stir stick in the goblet without the lid fitted. 2. Insert the stir stick 4 and move around the goblet slowly whilst the motor is operating, 3. Use the stir stick to help move ingredients around the goblet and prevent clogging during processing. ● ● Programme Button Drinks Soups Ice Crush hints To blend dry ingredients - cut into pieces, remove the filler cap, then with the machine running, drop the pieces down one by one. Keep your hand over the opening. For best results empty regularly. When making mayonnaise, put all the ingredients, except the oil, into the blender. Remove the filler cap. Then, with the appliance running, add the oil slowly through the hole in the lid. Thick mixtures, e.g. pâtés and dips, may need scraping down. If the mixture is difficult to process, add more liquid and use the stir stick supplied. Recommended Usage Chart (Programme buttons) Usage/Food Items Max. Programme Recommended Time Quantity Cold Liquids Max 1.6 litres 60 secs Drinks & Cocktails Milkshakes and milk based drinks Max 1.2 litres Smoothies 1 litre Liquid Place the fresh fruit and liquid ingredients in first (includes yoghurt, milk and fruit juices). Then add ice or frozen ingredients (includes frozen fruit, ice or ice cream) Stock based soups 1.2 litre 1.2 litres 30 secs Soups using milk 1 litre 1 litre DO NOT use the stir stick when processing hot liquids. We recommend that hot ingredients are allowed to cool before blending. However should you wish to process hot ingredients please read the Hot Blending Safety instructions. Ice crushing - Automatic pulsing action. 300g 30 secs A change in speed will be noted - this is (14 ice cubes) normal. Freeze fruit juice in ice trays for Slushie type drinks Sorbet recipes 350g 30 secs X 2 40g sugar 250g Frozen fruit 1 egg white Use the stir stick Instant Ice Cream 600g 30 secs X 2 100g sugar 300g Frozen mixed berries 150g whipping cream Use the stir stick Processing times stated are for guidance only and will vary depending on the exact recipe used, ingredients being processed and personal preference. Stop the processing when the desired result has been achieved. 6 Programme Button Fine Chop Coarse Chop Rinse Recommended Usage Chart (Programme Buttons) Usage/Food Items Max. Recommended Quantity Use for chopping nuts, breadcrumbs and similar dry ingredients. Grinding Coffee Beans and Spices. 200g Coffee Beans Almonds 200g Spices such as black peppercorns, 200g cardamon seeds, cumin seeds, coriander seeds, fennel seeds. Hints • For optimum performance when processing spices we recommend that you do not process more than 200g at a time. • Whole spices retain their flavour for a much longer time than ground spices so it is best to grind a small quantity fresh at a time to retain the flavour. • To release the maximum flavour and essential oils whole spices are best roasted prior to milling. Raw vegetables (such as onion, leeks, 250g carrots, celery) Salsa 350g 200g onion cut into quarters 1 red chilli cut in half ½ red pepper few coriander leaves 1 plum tomato Use to rinse the goblet before taking apart 500mls warm for cleaning. water Max For best results always take the blender apart for cleaning and dry thoroughly before re-assembling. Recommended Usage Chart (Manual Control) Recommended Speed Qty Mayonnaise Max 3 egg mix Max Caesar Dressing Max 200g Mid Vegetable Purees /Baby Food 300g Min - Mid Fruit Purees 200g - 500g Max Batter mixes Max 1 litre Max Uncooked meat (Lean Beef, 150g Max Pork and Lamb) Lean Beef cut into 2 cm cubes Usage/Food items Programme Time 30 secs For best results manually stop the program when you have achieved the desired result. 10 secs 10 secs 30 secs Time 60 secs 70 secs 60 secs 30 secs 15 secs 5 secs Processing times stated are for guidance only and will vary depending on the exact recipe used, ingredients being processed and personal preference. Stop the processing when the desired result has been achieved. 7 care and cleaning ● ● ● ● ● ● ● ● ● Always switch off, unplug and dismantle before cleaning. Empty the goblet before unscrewing it from the blade unit. Don’t immerse the blade unit in water. The goblet can be washed in your dishwasher. power unit Wipe with a damp cloth, then dry. Don’t immerse the power unit in water. Wind excess cord 2 into the cord storage device IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin. s. blade assembly 1 Unscrew the base from the goblet by turning in a clockwise direction. Refer to the graphics on the side of the base. - unlocked position - locked position 2 Then lift out the blade unit. ● Care should be taken when removing the blade unit from the base. 3 Remove and wash the sealing ring. 4 Don’t touch the sharp blades – brush them clean using hot soapy water, then rinse thoroughly under the tap. Don’t immerse the blade unit in water. DO NOT DISHWASH. 5 Leave to dry upside down. ● other parts Wash by hand, then dry. ● ● ● service and customer care ● Designed and engineered by Kenwood in the UK. Made in China. ● ● If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. This guarantee does not affect your statutory rights. If you experience any problems with the operation of the blender, before calling for assistance refer to the troubleshooting guide. UK If you need help with: ● using your appliance or ● servicing, spare parts or repairs (in or out of guarantee) 콯 call Kenwood customer care on 023 9239 2333. Have your model number (ie BLM80) and date code (5 digit code ie 13L35) ready. They are on the underside of the power unit. ● spares and attachments 콯 call 0844 557 3653. ● other countries Contact the shop where you bought your appliance. guarantee (uk only) If your blender goes wrong within one year from the date you bought it, we will repair it (or replace it if necessary) free of charge provided: you have not misused, neglected or damaged it; it has not been modified (unless by Kenwood); it is not second-hand; it has not been used commercially; you have not fitted a plug incorrectly; and you supply your receipt to show when you bought it. 8 troubleshooting guide Problem The Blender will not operate. Power on light flashing rapidly. Power On Light flashing slowly. Blender not operating but Power On and programme button lights on. Programme lights flashing Programme buttons not operating Blender leaking from blade assembly. Blender seal missing from blade unit when removed from packaging. Blender stops or slows during processing. Cause No Power/Power On Light not illuminated. Solution Check blender plugged in. Goblet removed from power unit without turning the speed control to “O”. The power unit will not operate until the speed control is turned to “on” and a speed is reselected. Blender not assembled correctly. Check blade unit is fully tightened to the goblet. The lights will flash under the following circumstances:The power unit is plugged in but the goblet is not fitted to the power unit. Fit the goblet. The goblet is removed from the power unit without turning the speed control to “O”. The blender has been left plugged in for more than 15 minutes and has gone into standby mode. Goblet fitted and speed control turned to “on” but speed or programme not selected. The lights will flash under the following circumstances:The power unit is plugged in but the goblet is not fitted to the power unit. The goblet is removed from the power unit without turning the speed control to “O”. Programme buttons will not operate unless the speed control is turned to the “on” position first. Seal missing. Seal incorrectly fitted. Seal damaged. The seal is packed pre-fitted to the blade unit. The power unit will not operate until the speed control is turned to “O” and a speed is reselected. Turn the speed control on and then off or press a program button to reset. Either select a speed manually or press one of the programme buttons. Overload protection operated. Blender overloaded or overheated during operation. Maximum capacity exceeded. If none of the above solve the problem see “Service & Customer Care”. 9 Fit the goblet. Turn the speed control to “O” and reselected a speed. Turn the speed control to “on” and select the required programme. Check seal is fitted correctly and not damaged. To obtain a replacement seal see “service & customer care”. Unscrew goblet and check that seal is fitted to blade unit. To obtain a replacement seal see “service & customer care”. Switch off, unplug for 5 seconds. Then plug back in. If blender does not operate then leave to cool for 15 minutes before plugging back in. Refer to the speed chart for maximum capacities to process. UNK•Ë ‹öJAL∞« ·UAJ∑ß« qO∞œ q∫∞« qL∑∫L∞« V∂º∞« WKJAL∞« ¸UO∑∞« ¸bBL° ◊öª∞« qOÅu¢ s± ÍbØQ¢ WÆUD∞« qOGA¢ d®R± ¡u{/WÆU© b§u¢ ô .qLF¥ ô ◊öª∞« .w°dNJ∞« .¡wC¥ ô )On(i n∞ bM´ ô≈ )¸u¢uL∞«( WÆUD∞« …b•Ë qLF¢ s∞ )¸u¢uL∞«( WÆUD∞« …b•Ë s´ ‚¸Ëb∞« W∞«“≈ r¢ l{u± v∞≈ W´dº∞« w≠ rJ∫∑∞« ÕU∑H± v∞≈ W´dº∞« w≠ rJ∫∑∞« ÕU∑H± …œU´≈ ÊËœ .W´dß ¸UO∑î«Ë "on" qOGA∑∞« ."O" l{uL∞« w≠ ÂUJ•S° ‹«dHA∞« …b•Ë j°¸ s± ÍbØQ¢ .W∫O∫B∞« WI¥dD∞U° ◊öª∞« VOØd¢ r∑¥ r∞ .‚¸Ëb∞« œ«b´ù« WI°Uß Z±«d∂∞« ¡«u{√ i±u¢ "On" WÆUD∞« qOGA¢ d®R± :WO∞U∑∞« ‹ôU∫∞« w≠ l¥dß qJA° i±u¥ .‚¸Ëb∞« w∂ظ ¸UO∑∞« ¸bBL° “UNπ∞« qOÅu¢ W∞U• w≠ …b•Ë vK´ ‚¸Ëb∞« VOØd¢ ÊËb° w°dNJ∞« .)¸u¢uL∞«( WÆUD∞« n∞ bM´ ô≈ )¸u¢uL∞«( WÆUD∞« …b•Ë qLF¢ s∞ )¸u¢uL∞«( WÆUD∞« …b•Ë s´ ‚¸Ëb∞« W∞«“≈ r¢ l{u± v∞≈ W´dº∞« w≠ rJ∫∑∞« ÕU∑H± W´dº∞« w≠ rJ∫∑∞« ÕU∑H± …œU´≈ ÊËœ .W´dß ¸UO∑î«Ë "O" qOGA∑∞« ."O" l{uL∞« v∞≈ l{u± v∞≈ W´dº∞« w≠ rJ∫∑∞« ÕU∑H± wH∞ w°dNJ∞« ¸UO∑∞« ¸bBL° ◊öª∞« qOÅu¢ r¢ i±u¥ )On( WÆUD∞« qOGA¢ d®R± Ë√ )off( ·UI¥ù« l{u± r£ )on( qOGA∑∞« qîœ p∞c°Ë WIOÆœ 15 s± ‰u©√ …bL∞ .¡wD° qJA° .sOOF∑∞« …œU´ù Z±U≤d° ¸“ vK´ wDG{« .œ«bF∑ßô« l{Ë w≠ ◊öª∞« Ë√ UÎ¥Ëb¥ qOGA∑∞« W´dß Í¸U∑ª¢ Ê√ U±≈ w≠ rJ∫∑∞« ÕU∑H± n∞ r¢Ë ‚¸Ëb∞« VOØd¢ r¢ ¡U{≈ s± r¨d∞« vK´ qLF¥ ô ◊öª∞« .Z±«d∂∞« ¸«¸“√ b•√ vK´ wDG{« b¥b∫¢ r∑¥ r∞ sJ∞Ë "on" l{uL∞« v∞≈ W´dº∞« .Z±«d∂∞« ¸«¸“√Ë )On( WÆUD∞« qOGA¢ ¸“ .»uKDL∞« qOGA∑∞« Z±U≤d° Ë√ W°uKDL∞« W´dº∞« œ«b´ù« WI°Uß Z±«d∂∞« ¡«u{√ i±u¢ Z±«d∂∞« ¸«¸“√ ¡«u{√ i±u¢ :WO∞U∑∞« ‹ôU∫∞« w≠ .‚¸Ëb∞« w∂ظ ¸UO∑∞« ¸bBL° “UNπ∞« qOÅu¢ W∞U• w≠ …b•Ë vK´ ‚¸Ëb∞« VOØd¢ ÊËb° w°dNJ∞« .)¸u¢uL∞«( WÆUD∞« l{uL∞« v∞≈ W´dº∞« w≠ rJ∫∑∞« ÕU∑H± wH∞ )¸u¢uL∞«( WÆUD∞« …b•Ë s´ ‚¸Ëb∞« W∞«“≈ r¢ v∞≈ W´dº∞« w≠ rJ∫∑∞« ÕU∑H± …œU´≈ ÊËœ .qOGA∑K∞ W´dß ¸UO∑î« ÍbO´√Ë "O" ."O" l{uL∞« l{uL∞« v∞≈ W´dº∞« w≠ rJ∫∑∞« ÕU∑H± wH∞ ÕU∑H± tO§u¢ bM´ v∞≈ Z±«d∂∞« ¸«¸“√ qLF¢ s∞ qLF¢ ô Z±«d∂∞« ¸«¸“√ .»uKDL∞« Z±U≤d∂∞« ͸U∑î«Ë "on" .ôÎË√ "on" l{uL∞« v∞≈ W´dº∞« w≠ rJ∫∑∞« qJA° ÂUJ•ù« WIK• VOØd¢ s± ÍbØQ¢ .W∂Ød± dO¨ ÂUJ•ù« WIK• …b´UÆ WO•U≤ s± ◊öª∞« w≠ V¥dº¢ „UM≥ WIK• vK´ ‰uB∫K∞ .UNHK¢ Âb´Ë `O∫Å .W∫O∫Å dO¨ WI¥dD° W∂Ød± ÂUJ•ù« WIK• .‹«dHA∞« …b•Ë W¥U´¸Ë W≤UOB∞«" rºÆ wF§«¸ ,WK¥b° ÂUJ•≈ .WH∞U¢ ÂUJ•ù« WIK• ."¡öLF∞« ÂUJ•ù« WIK• VOØd¢ s± bOØQ¢Ë ‚¸Ëb∞« wJ≠ ‚ËbMÅ qî«œ ÂUJ•ù« WIK• b¥Ëe¢ r∑¥ nOKG∑∞« s± ‹«dHA∞« …b•Ë ëdî≈ bM´ .‹«dHA∞« …b•Ë w≠ W∂Ød± nOKG∑∞« WÅUª∞« ÂUJ•ù« WIK• vK´ ¸u∏F∞« r∑¥ r∞ WIK• vK´ ‰uB∫K∞ .‹«dHA∞« W´uLπ± w≠i W¥U´¸Ë W≤UOB∞«" rºÆ wF§«¸ ,WK¥b° ÂUJ•≈ .◊öª∞U° ."¡öLF∞« ¸bB± s´ “UNπ∞« wKB≠«Ë qOGA∑∞« wHÆË√ .bz«e∞« qOL∫∑∞« b{ W¥UL∫∞« WHO™Ë qOGA¢ r¢ ¡UM£√ t∑´dß QD∂¢ Ë√ ◊öª∞« nÆu∑¥ …d± tOKÅË r£ .Ê«u£ 5 …bL∞ w°dNJ∞« ¸UO∑∞« …¸«d∫∞« W§¸b∞ “ËUπ¢ Ë√ bz«“ qOL∫¢ „UM≥ .qOGA∑∞« qLF¥ r∞ Ê≈ .w°dNJ∞« ¸UO∑∞« ¸bBL° Èdî√ .◊öª∞« qOGA¢ ¡UM£√ UN° ÕuLºL∞« …bL∞ œd∂O∞ tOØd¢« W∞U∫∞« Ác≥ wH≠ ,◊öª∞« Èdî√ …d± WKOÅu¢ …œU´≈ q∂Æ WIOÆœ 15 .w°dNJ∞« ¸UO∑∞« ¸bBL° vK´ ‰uB∫K∞ ‹U´dº∞« ‰Ëb§ wF§«¸ .…œb∫L∞« ÈuBI∞« WFº∞« “ËUπ¢ r¢ dOC∫¢ w≠ W±bª∑ºL∞« ÈuBI∞« ‹UFº∞« .ÂUFD∞« ."¡öLF∞« W¥U´¸Ë W≤UOB∞«" rºÆ wF§«¸ W∞U∫∞« Ác≥ wH≠ ,WI°Uº∞« ‹«uDª∞« ‰öî s± UNMON§«u¢ w∑∞« WKJAL∞« q• r∑¢ r∞ Ê≈ 17 nOEM∑∞«Ë W¥UMF∞« w°dNJ∞« ¸UO∑∞« ¸bB± s´ tKB≠ ,“UNπ∞« ·UI¥S° UÎLz«œ w±uÆ .nOEM∑∞« q∂Æ WÆUD∞« …b•Ë s´ ‚¸Ëb∞« W´uLπ± p≠Ë .‹«dHA∞« …b•Ë s± tJ≠ q∂Æ ‚¸Ëb∞« ‹U¥u∑∫± ⁄«d≠S° w±uÆ .¡UL∞« w≠ ‹«dHA∞« …b•Ë dLG° w±uI¢ ô .‚U∂©_« W∞Uº¨ w≠ ‚¸Ëb∞« qº¨ pMJL¥ WÆUD∞« …b•Ë .UNHOHπ¢ r£ ,W∂©¸ ‘ULÆ WFDI° UN∫ºL° w±uÆ .¡UL∞« w≠ WÆUD∞« …b•Ë dLG° w±uI¢ ô pKº∞« s¥eª¢ ÊUJ± qî«œ 2 bz«e∞« w°dNJ∞« pKº∞« wH∞ .s w°dNJ∞« Z∑ML∞« s± W∫O∫B∞« hKª∑∞« WOHOØ ‰u• W±U≥ ‹U±uKF± .2002/96/EC w°Ë¸Ë_« œU∫¢ô« tO§u∑∞ UI≠Ë “UNπ∞« s± hKª∑∞« Âb´ Vπ¥ ,“UNπK∞ wKOGA∑∞« dLF∞« W¥UN≤ w≠ .W¥dC∫∞« o©UML∞« ‹U¥UH≤ w≠ w≠ WBBª∑± WOK∫± WNπ° ’Uî lOLπ¢ eØd± v∞≈ Ácî√ Vπ¥ q° .W±bª∞« Ác≥ ÂbI¥ d§U¢ v∞≈ Ë√ ‹U¥UHM∞« Ác≥ s± hKª∑∞« ¸U£ü« VMπ¥ ,qBHM± u∫≤ vK´ WO∞eML∞« …eN§_« s± hKª∑∞« s± hKª∑∞« s´ Z∑M¢ w∑∞«Ë W∫B∞«Ë WµO∂∞« vK´ WKL∑∫L∞« WO∂Kº∞« `Lº¢ WOKLF∞« Ác≥ Ê√ ULØ ,W∂ßUM± dO¨ WI¥dD° ‹U¥UHM∞« Ác≥ ‹«¸u≠Ë vK´ ‰uB∫∞« `O∑¥ Íc∞« d±_« W≤uJL∞« œ«uL∞« œ«œd∑ßU° s± hKª∑∞« …¸ËdC° dOØc∑K∞ .œ¸«uL∞«Ë WÆUD∞« ‰Uπ± w≠ …dO∂Ø …¸uÅ “UNπ∞« vK´ b§u¥ ,qBHM± u∫≤ vK´ WO∞eML∞« …eN§_« .‹öπ´ ‹«– W±ULÆ WKº∞ W°uDA± ‹«dHA∞« …b•Ë .W´Uº∞« »¸UI´ ÁU㛮 w≠ UNH∞ o¥d© s´ ‚¸Ëb∞« s± …b´UI∞« wJ≠ .…b´UI∞« V≤U§ vK´ œu§uL∞« w∫O{u∑∞« rßd∞« wF§«¸ `∑H∞« l{u± qHI∞« l{u± .øUªK∞ ‹«dHA∞« …b•Ë wF≠¸« r£ .…b´UI∞« s± ‹«dHA∞« …b•Ë W∞«“≈ bM´ ¸c∫∞« vîu¢ Vπ¥ .tKº¨Ë ÂUJ•ù« ‚u© W∞«“S° w±uÆ WDß«u° ‹«dHA∞« nOEM∑° w±uÆ - …œU∫∞« ‹«dHA∞« wºLK¢ ô UNHDA° w±uÆ r£ ,Êu°UÅË sîUß ¡U± «bª∑ßU° …U®«dH∞« w≠ ‹«dHA∞« b•Ë dLG° w±uI¢ ô .¸u∂MB∞« X∫¢Î «bO§ .‚U∂©_« W∞Uº¨ w≠ qOºG∞« ¸c∫¥ .¡UL∞« .»uKI± l{Ë w≠ nπ¢ UNOØd¢« ● ● ● ● ● ● ● 1 2 ● 3 4 5 Èdîô« ¡«e§ô« .nHπ¢ r£ ,bO∞U° qºG¢ ¡öLF∞« W¥U´¸Ë W±bª∞« WIKF∑± »U∂ß_ t∞«b∂∑ß« Vπ¥ ,w°dNJ∞« pKº∞« nK¢ W∞U• w≠ q∂Æ s± bL∑F± W≤UOÅ eØd± Ë√ KENWOOD q∂Æ s± W±öº∞U° .KENWOOD q∂Æ ,◊öª∞« qOGA¢ w≠ ‹öJA± WN§«u± W∞U• w≠ qO∞œ wF§«¸ …b´UºL∞« vK´ ‰uB∫∞« VKD∞ ‰UB¢ô« .UN•öÅ≈Ë ¡UDî_« ·UAJ∑ß« :ÊQA° …b´Uº± vK´ ‰uB∫∞« ‹œ¸√ «–≈ ‹U•öÅ≈Ë W≤UOÅ ‹UOKL´ “UNπ∞« «bª∑ß« .“UNπ∞« tM± w∑¥d∑®« Íc∞« dπ∑L∞U° wKB¢« .…b∫∑L∞« WJKLL∞« w≠ Kenwood d¥uD¢Ë rOLB¢ .sOB∞« w≠ lMÅ 16 ● ● ● ● ● ● s±“ Z±U≤d∂∞« WO≤U£ 30 qC≠√ vK´ ‰uB∫K∞ wHÆË√ ,UÎ¥Ëb¥ ZzU∑M∞« ¸u≠ Z±U≤d∂∞« qOGA¢ WπO∑M∞« vK´ ‰uB∫∞« .W°uKDL∞« Ê«u£ 10 Ê«u£ 10 WO≤U£ 30 s±e∞« WO≤U£ 60 WO≤U£ 70 WO≤U£ 60 WO≤U£ 30 WO≤U£ 15 Ê«u£ 5 )Z±«d∂∞« ¸«¸“√( UN° vÅuL∞« ‹U±«bª∑ßô« ‰Ëb§ WFº∞« ÂUFD∞« Ÿ«u≤√/«bª∑ßô« ÈuBI∞« UN° vÅuL∞« ‹«dºØË ‹«dºJL∞« ÂdH∞ Z±U≤d∂∞« «c≥ w±bª∑ß« .W≠Uπ∞« ‹U≤uJL∞« s± t°U® U±Ë e∂ª∞« .q°«u∑∞«Ë …uNI∞« »u∂• s∫© «d¨ 200 …uNI∞« »u∂• «d¨ 200 “uK∞« «d¨ 200 ÊuLJ∞«Ë qON∞« ¸Ëc°Ë œuß_« qHKH∞« q∏± q°«u∑∞« .¸U∫∞« qHKH∞« ÊËdÆË …dLA∞«Ë …d°eJ∞«Ë ‹U∫OLK¢ q°«u∑∞« dOC∫¢ bM´ q∏±_« ¡«œ_« vK´ ‰uB∫K∞ • s± «d¨ 200 s± d∏Ø√ dOC∫¢ ÂbF° p∫BM≤ .…b•«u∞« …dL∞« w≠ ‹U≤uJL∞« WOM±“ …d∑≠ UN∑NJM° q±UJ∞« q°«u∑∞« ÊËdÆ kH∑∫¢ • s∫© qC≠_« sL≠ p∞c∞ W≤u∫DL∞« q°«u∑∞« s± ‰u©√ UN±«bª∑ßô WK±UJ∞« q°«u∑∞« ÊËdÆ s± …dOGÅ WOLØ .WNJM∞U° ÿUH∑•ö∞ p∞–Ë s± WOßUß√ ‹u¥“Ë WNJ≤ vBÆ√ vK´ ‰uB∫K∞ • hOL∫¢ qC≠_« sL≠ WK±UJ∞« q°«u∑∞« ÊËdÆ .UNM∫© q∂Æ q°«u∑∞« «d¨ 250 ¸eπ∞«Ë À«dJ∞«Ë qB∂∞« q∏±( WµOM∞« ‹«Ë«dCª∞« )f≠dJ∞«Ë «d¨ 350 WBKB∞« ŸU°¸√ v∞≈ WFDI± qB° …dL£ «d¨ 200 sOHB≤ v∞≈ WFDI± dL•√ qHK≠ …dL£ 1 )WD®( dL•√ qHK≠ 1/2 …d°eJ∞« s± qOKÆf r©UL© …dL£ 1 T≠«œ ¡U± wKK± 500 t∑∞«“≈ q∂Æ ‚¸Ëb∞« nDA∞ Z±U≤d∂∞« w±bª∑ß« vBÆ√ b∫° .nOEM∑∞« q§√ s±f tHOEM∑∞ ◊öª∞« wJ≠ ,ZzU∑M∞« qC≠√ vK´ ‰uB∫K∞ .t∂OØd¢ …œU´≈ q∂Æ «ÎbO§ tOHH§Ë )Z±«d∂∞« ¸«¸“√( UN° vÅuL∞« ‹U±«bª∑ßô« ‰Ëb§ WFº∞« UN° vÅuL∞« )Max( WO∞UF∞« W´dº∞« vBÆ√ b∫° ‹UCO° 3 s± ÊuJ± jOKî )Mid( WDßu∑L∞« W´dº∞« vBÆ√ b∫° «d¨ 200 v∞≈ WCHªML∞« W´dº∞« «d¨ 300 )Min - Mid( WO∞UF∞« )Max( WO∞UF∞« W´dº∞« «d¨ 500 v∞≈ 200 )Max( WO∞UF∞« W´dº∞« d∑∞ 1 vBÆ√ b∫° «d¨ 150 )Max( WO∞UF∞« W´dº∞« W´dº∞« Z±U≤d∂∞« ¸“ r´UM∞« ÂdH∞« sAª∞« ÂdH∞« nDA∞« ÂUFD∞« Ÿ«u≤√/«bª∑ßô« eO≤u¥UL∞« ¸eOº∞« WBKÅ qHD∞« ÂUF©/‹«Ë«dCª∞« ”ËdN± tØ«uH∞« ”ËdN± ”dN∞« ‹UDKî ÍdI∂∞« r∫K∞«( WONDL∞« dO¨ Âu∫K∞« )·«dª∞«Ë ÍdD∞« rß 2 ‹U∂FJ± v∞≈ lDI± ÍdI∂∞« r∫K∞« .WOBªA∞« ‹öOCH∑∞«Ë dOC∫∑∞« w≠ W±bª∑ºL∞« ‹U≤uJL∞«Ë WHÅu∞« Vº• nK∑ª¢Ë jI≠ W¥œU®¸≈ WM±“√ w≥ W{ËdFL∞« jKª∞« WM±“√ .»uKDL∞« «uI∞« v∞≈ ‰uÅu∞« œdπL° jOKª∞« Wπ∞UF± s´ wHÆu¢ 15 )Z±«d∂∞« ¸«¸“√( UN° vÅuL∞« ‹U±«bª∑ßô« ‰Ëb§ WFº∞« ÂUFD∞« Ÿ«u≤√/«bª∑ßô« ÈuBI∞« UN° vÅuL∞« WO≤U£ 60 d∑∞ 1\6 …œ¸U° qz«uß ‹öO∑ØuJ∞«Ë ‹U°ËdAL∞« d∑∞ 1\2 vBÆ√ b∫° qîb¥ w∑∞« ‹U°ËdAL∞«Ë ‚uHªL∞« VOK∫∞« UNM¥uJ¢ w≠ VOK∫∞« qz«uß d∑∞ 1 W∂©dL∞« ‹U°ËdAL∞« UL°( ôÎË√ WKzUº∞« ‹U≤uJL∞«Ë W§“UD∞« tØ«uH∞« wF{ .)tØ«uH∞« dzUB´Ë VOK∫∞«Ë ÍœU°e∞« ,p∞– w≠ ,p∞– w≠ UL°( …bLπL∞« ‹U≤uJL∞« Ë√ ZK∏∞« wHO{√ r£ .)r¥dØ f¥ü« Ë√ ZK∏∞«Ë …bLπL∞« tØ«uH∞« WO≤U£ 30 d∑∞ 1\2 d∑∞ 1\2 Âu∫K∞« ¡Uº• d∑∞ 1 d∑∞ 1 VOK∫∞« l± dC∫L∞« ¡Uº∫∞« .WMîUº∞« qz«uº∞« Wπ∞UF± bM´ VOKI∑∞« UB´ «bª∑ß« ¸c∫¥ .UNDKî q∂Æ œd∂¢ wJ∞ WMîUº∞« ‹U≤uJL∞« „d∑° `BM≤ jKî ‹ULOKF¢ WF§«d± v§dO≠ ,WMîUº∞« ‹U≤uJL∞« jKî w¢œ¸√ «–≈ p∞– s± r¨d∞« vK´Ë .WMîUº∞« ‹U≤uJL∞« WO≤U£ 30 «d¨ 300 .wzUIK¢ wC∂≤ qOGA¢ - ZK∏∞« ‘d§ )ZK£ VFJ± 14(( .wFO∂© d±√ «c≥ - qOGA∑∞« W´dß w≠ dOG¢ k•öOß . ZK∏∞« ‹U∂FJ± w≤«uÅ w≠ WNØUH∞« dOB´ ÍbL§ "w®uKß" ŸuM∞« s± ‹U°ËdA± dOC∫∑∞ )2( sO¢d± WO≤U£ 30 «d¨ 350 ‹U°dA∞« dOC∫¢ WHÅË dJß Â«d¨ 40 …bLπ± WNØU≠ «d¨ 250 WCO° ÷UO° 1 VOKI∑∞« UB´ w±bª∑ß« )2( sO¢d± WO≤U£ 30 «d¨ 600 l¥dº∞« r¥dØ f¥ü« dJß Â«d¨ 100 bLπL∞« ‹u∑∞« s± jOKî «d¨ 300 WÆuHª± …bAÆ Â«d¨ 150 VOKI∑∞« UB´ w±bª∑ß« s±“ Z±U≤d∂∞« Z±U≤d∂∞« ¸“ ‹U°ËdAL∞« ¡Uº∫∞« ZK∏∞« ‘d§ .WOBªA∞« ‹öOCH∑∞«Ë dOC∫∑∞« w≠ W±bª∑ºL∞« ‹U≤uJL∞«Ë WHÅu∞« Vº• nK∑ª¢Ë jI≠ W¥œU®¸≈ WM±“√ w≥ W{ËdFL∞« jKª∞« WM±“√ .»uKDL∞« «uI∞« v∞≈ ‰uÅu∞« œdπL° jOKª∞« Wπ∞UF± s´ wHÆu¢ 14 dO¨ qJA° ◊öª∞« VOØd¢ W∞U• w≠ “UNπ∞« qLF¥ s∞ ● .`O∫Å qOGA¢ ¸“ ¡wC¥ czbM´ ,w°dNJ∞« ¸UO∑∞« ¸bBL° “UNπ∞« wKÅË 7 .)On) 7 WÆUD∞« VOØd¢ Âb´ W∞U• w≠ )On( WÆUD∞« qOGA¢ d®R± i±u¥ :WE•ö± W°uKDL∞« W´dº∞« Íœb• .)¸u¢uL∞«( WÆUD∞« …b•Ë w≠ ‚¸Ëb∞« .)UN° vÅuL∞« ‹U´dº∞« ‰Ëb§ wF§«¸( :WO∞U∑∞« ‹«¸UOª∞« s± Í√ Íœb• 8 l{u± v∞≈ W´dº∞« w≠ rJ∫∑∞« ÕU∑H± wH∞ -:Z±«d∂∞« ¸«¸“√ ● ¸“ vK´ wDG{« .Z±«d∂∞« ¸«¸“√ ¡UC¢ czbM´ )On( qOGA∑∞« √b∂¥Ë Èdî_« Z±«d∂∞« ¡«u{√ THDM¢ czbM´ ,»uKDL∞« Z±U≤d∂∞« bFL∞« Z±U≤d∂∞« s±“ ¡UN∑≤« bM´ UÎOzUIK¢ ◊öª∞« nÆu∑¥ .qOGA∑∞« bFL∞« Z±U≤d∂∞« s±“ ¡UN∑≤« q∂Æ ◊öª∞« ·UI¥≈ w¢œ¸√ «–≈ .UÎI°Uß .Èdî√ …d± Âbª∑ºL∞« Z±U≤d∂∞« ¸“ vK´ wDG{« ,UÎI°Uß w≠ rJ∫∑∞« ÕU∑H± n∞ o¥d© s´ UÎ¥Ëb¥ W´dº∞« b¥b∫¢ pMJL¥ ● ,jKª∞« WOKL´ W¥UN≤ w≠ .W°uKDL∞« W´dº∞« l{u± v∞≈ W´dº∞« W∞«“≈ q∂Æ "O" l{uL∞« v∞≈ W´dº∞« w≠ rJ∫∑∞« ÕU∑H± ÍbO´√ .◊öª∞« ‹«dHA∞« nÆu¢ q∂Æ WÆUD∞« …b•Ë s´ ‚¸Ëb∞« wF≠d¢ ô ● v∞≈ W´dº∞« w≠ rJ∫∑∞« ÕU∑H± …œU´≈Ë WØd∫∞« s´ ."O" l{uL∞« W¥œœd¢ WI¥dD° ¸u¢uL∞« qGA¥ - )P( wC∂M∞« qOGA∑∞« ¸“ ● jGC∞« r¢ UL∞U© wC∂M∞« qOGA∑∞« l{Ë qLF¥ .·UI¥≈/qOGA¢ .l{u∞« «c≥ ¸“ vK´ w°dNJ∞« ¸UO∑∞« ¸bBL° “UNπ∞« qOÅu¢ q∂Æ l± w°dNJ∞« ¸bBL∞« ‹UHÅ«u± q£UL¢ s± bØQ∑∞« Vπ¥ .“UNπK∞ wKHº∞« V≤Uπ∞« vK´ W∫{uL∞« ‹UHÅ«uL∞« w°Ë¸Ë_« œU∫¢ô« ‹UNO§u¢ l± “UNπ∞« «c≥ o≠«u∑¥ ‹ULOEM¢Ë wºO©UMG±ËdNJ∞« o≠«u∑∞« ÊQA° 2004/108/EC a¥¸U∑° …¸œUB∞« 1935/2004 rƸ w°Ë¸Ë_« œU∫¢ô« .WLF©_« l± Wº±ö∑L∞« œ«uL∞U° WIKF∑L∞«Ë 2004/10/27 ● qO∞b∞« Wµ∂F∑∞« W∫∑≠ ¡UD¨ ¡UD¨ ‚¸Ëb∞« ÂUJ•ù« ‚u© ‹«dHA∞« …b•Ë ‹«dHA∞« …b•Ë …b´UÆ )On( WÆUD∞« qOGA¢ d®R± wC∂M∞« qOGA∑∞« + W´dº∞« w≠ rJ∫∑∞« ÕU∑H± ¸u¢uL∞« ‹U°ËdAL∞« Z±U≤d° ¸“ ¡Uº∫∞« Z±U≤d° ¸“ ZK∏∞« ‘d§ Z±U≤d° ¸“ r´UM∞« ÂdH∞« Z±U≤d° ¸“ sAª∞« ÂdH∞« Z±U≤d° ¸“ nDA∞« Z±U≤d° ¸“ W¥uN∑∞« ‹U∫∑≠ VOKI∑∞« UB´ pKº∞« s¥eª¢ ÊUJ± «–≈ U± W∞U• w≠ UNK•Ë ‹öJAL∞« ·UA∑Ø« rºÆ wF§«¸ .◊öª∞« qOGA¢ l± ‹öJA± W¥√ p∑N§«Ë VOKI∑∞« UB´ «bª∑ß« 1 2 3 4 5 6 7 8 9 k l m n o p q r s ◊öª∞« «bª∑ß« ô .Wµ∂F∑∞« W∫∑≠ wK¥“√Ë ‚¸Ëb∞« vK´ ÍuKF∞« ¡UDG∞« w∂ظ 1 .ÍuKF∞« ¡UDG∞« VOØd¢ ÊËœ ‚¸Ëb∞« w≠ VOKI∑∞« UB´ w±bª∑º¢ W¥dz«œ WØd• w≠ ‚¸Ëb∞« qî«œ UNOØd•Ë 4 VOKI∑∞« UB´ wKîœ√ 2 .¸u¢uL∞« qOGA¢ ¡UM£√ WµOD° ‰u• ‹U≤uJL∞« p¥d∫¢ w≠ …b´UºLK∞ VOKI∑∞« UB´ w±bª∑ß« 3 .Wπ∞UFL∞« ¡UM£√ ‹U≤uJLK∞ oKF¢ Í√ ÀËb• VMπ¢Ë ‚¸Ëb∞« …bOH± ‹UE•ö± ¡UD¨ wK¥“√ r£ …dOGÅ ¡«e§√ v∞≈ UNOFDÓÆ - W≠U§ ‹U≤uJ± jKª∞ .“UNπ∞« qOGA¢ ¡UM£√ Èdî_« uK¢ WFDÆ UNODIß√Ë Wµ∂F∑∞« W∫∑≠ w¨d≠√ ZzU∑M∞« qC≠√ vK´ ‰uB∫K∞ .W∫∑H∞« ‚u≠ p¥b¥ wI°√ .rE∑M± qJA° ‹U¥u∑∫L∞« «b´ ◊öª∞« w≠ ‹U≤uJL∞« qØ wF{ ,eO≤u¥UL∞« dOC∫¢ bM´ WµOD° WI¥dD° X¥e∞« w∂ÒÅ r£ .Wµ∂F∑∞« W∫∑≠ ¡UD¨ wK¥“√ .X¥e∞« qOGA¢ ¡UM£√ ÍuKF∞« ¡UDG∞« w≠ …œu§uL∞« W∫∑H∞« ‰öî s± .“UNπ∞« ‹UßuLGL∞«Ë WAN∞« ‹UMπFL∞« q∏± WJOLº∞« ‹UDKª∞« ÃU∑∫¢ bÆ Wπ∞UF± w≠ W°uFÅ WN§«u± W∞U• w≠ .V≤«uπ∞« jAØ v∞≈ VOKI∑∞« UB´ w±bª∑ß«Ë qzUº∞« s± b¥eL∞« wHO{√ ,jOKª∞« .…œËeL∞« ● s± bØQ∑∞« l± - 5 ‹«dHA∞« …b•Ë vK´ 4 ÂUJ•ù« WIK• w∂ظ qî«œ `O∫Å qJA° UNF{u± w≠ ÂUJ•ù« WIK• ¸«dI∑ß« .3 ‚¸Ëb∞« w≠ ‹«dHA∞« …b•Ë w∂ظ r£ .n¥uπ∑∞« qJA° WLJ∫± dO¨ Ë√ WH∞U¢ ÂUJ•ù« WIK• X≤UØ «–≈ .ÎU∂¥dº¢ Àb∫¥ ·uº≠ `O∫Å j°¸ s± bØQ∑∞« l± - ‚¸Ëb∞« w≠ 6 ‹«dHA∞« …b•Ë …b´UÆ wD°¸« WO∫O{u∑∞« Âußd∞« wF§«¸ .ÂUJ•S° ‹«dHA∞« W´uLπ± :w∞U∑∞UØ w≥Ë ‹«dHA∞« …b•Ë …b´UÆ V≤U§ vK´ …œu§uL∞« `∑H∞« l{u± qHI∞« l{u± .‚¸Ëb∞« qî«b° p¢U≤uJ± wF{ qHß_ UNOK´ wDG{«Ë ÍuKF∞« ¡UDG∞« vK´ Wµ∂F∑∞« W∫∑≠ w∂ظ .UNF{u± w≠ dI∑º∑∞ .tF{u± w≠ dI∑º¥ v∑• tOK´ jGC∞U° ÍuKF∞« ¡UDG∞« w∂ظ .)¸u¢uL∞«( WÆUD∞« …b•Ë vK´ ◊öª∞« wF{ s¥eª¢ ÊUJ± s± q±UJ∞U° w°dNJ∞« pKº∞« œd≠ s± ÍbØQ¢ .◊öª∞« «bª∑ß« q∂Æ “UNπ∞« w≠ œu§uL∞« pKº∞« ● ● ● 13 1 ● 2 3 4 5 6 ● .UΨ¸U≠ ◊öª∞« qOGA¢ ¸c∫¥ ‰Ëb§ w≠ …œb∫L∞« WFºK∞ vBÆ_« b∫∞« …“ËUπ∑± Ãe± WOKL´ ¡«d§S° w±uI¢ ô .UN° vÅuL∞« ‹U´dº∞« .ozUÆœ 3 s± ‰u©√ …dL∑º± …d∑H∞ tOKGA¢ ô ,◊öª∞« dL´ W∞U©≈ ÊULC∞ …bLπL∞« ‹U≤uJL∞« wDKª¢ ô - …u¨d∞« ‹«– WÆuHªL∞« ‹U°ËdAL∞« ‹UHÅu∞ W∂ºM∞U° UN∑≠U{≈ q∂Æ ¡«e§√ v∞≈ UNOLA≥ sJ∞Ë ,bOLπ∑∞« ¡UM£√ W∂KÅ WK∑Ø v∞≈ X∞u∫¢ w∑∞« .‚¸Ëb∞« v∞≈ w°dNJ∞« pKº∞«Ë “UNπ∞U° wEH∑•« .‰UH©_« q∂Æ s± “UNπ∞« «c≥ «bª∑ß« “uπ¥ ô .‰UH©_« ‰ËUM∑± s´ «ÎbOF° rØdJ∞« ¸Ëc§ Ë√ VOD∞« …“u§ q∏± W∂KB∞« q°«u∑∞« Wπ∞UF± w≠ ◊öª∞« w±bª∑º¢ ô .◊öª∞« nK¢ w≠ V∂º∑¢ bI≠ bF°Ë q∂Æ UΨ¸U≠ ‚¸Ëb∞« vK´ wE≠U• .s¥eª¢ W¥ËU∫Ø ◊öª∞« w±bª∑º¢ ô .«bª∑ßô« .·U§Ë s±√ `Dß vK´ UÎLz«œ ◊öª∞« w±bª∑ß« Í√ w≠ Ë√ WOzU°dNØ WKF® Ë√ sîUß Í“U¨ bÆu± s± »dI∞U° Ë√ vK´ “UNπ∞« wFC¢ ô .sîUß “UN§ l± “UNπ∞« tO≠ f±ö∑¥ ÊUJ± .UN∑∞«“≈ W∞ËU∫± Vπ¥ ôË lOMB∑∞« ¡UM£√ ‚¸Ëb∞« …b´UÆ V≤«u§ VOØd¢ r¢ - ÂU≥ .‹U°UÅ≈ ÀËb• v∞≈ ◊öª∞« «bª∑ß« ¡uß ÍœR¥ bÆ WOKI´ Ë√ WOº• Ë√ W¥bº§ ‹«¸bÆ ÍË– ’Uª®√ q∂Æ s± …eN§_« «bª∑ß« sJL¥ rN∫M± W∞U• w≠ …eN§_« «bª∑ßU° W≠dF± Ë√ …d∂î ÊËœ r≥ sL±Ë WCHªM± WI¥dD° t±«bª∑ß« rNMJL¥ YO∫° rNOK´ ·«d®ù« Ë√ «bª∑ßôU° WÅUª∞« ‹ULOKF∑∞« .“UNπ∞« «bª∑ß« vK´ ÍuDM¢ w∑∞« d©UªL∞« „«¸œ≈ l± WM±¬ WØd® qL∫∑¢ s∞ .UN∞ hBªL∞« WO∞eML∞« ‹U±«bª∑ßô« w≠ jI≠ “UNπ∞« w±bª∑ß« Âb´ Ë√ W∫O∫Å dO¨ WI¥dD° “UNπ∞« «bª∑ß« W∞U• w≠ WO∞uµº± W¥√ Kenwood .…¸uØcL∞« ‹ULOKF∑K∞ ‰U∏∑±ô« 12 ● ● ● ● ● ● ● ● ● ● ● ● ● W≠U•Ë ÍuKF∞« ¡UDG∞« W≠UE≤ s± UÎLz«œ ÍbØQ¢ ‚¸Ëb∞« vK´ ÍuKF∞« ¡UDG∞« VOØd¢ bM´ .d£UM¢ Í√ ÀËb• lM±Ë ÂUJ•S° VOØd∑∞« s± bØQ∑K∞ ULNOHH§Ë ‚¸Ëb∞« ● p∑±öº∞ :w°dNJ∞« ¸UO∑∞« ¸bB± s´ tKB≠Ë “UNπ∞« qOGA¢ ·UI¥S° w±uÆ ¡«e§_« W∞«“≈Ë VOØd¢ q∂Æ ● ;«bª∑ßô« Âb´ W∞U• w≠ ● .nOEM∑∞« q∂Æ ● VOØd¢ ÊËb° )¸u¢uL∞«( WÆUD∞« …b•Ë vK´ ‹«dHA∞« …b•Ë VOØd¢ ¸c∫¥ .◊öª∞« ‚¸Ëœ w≠ œu§uL∞« pKº∞« s¥eª¢ ÊUJ± s± q±UJ∞U° w°dNJ∞« pKº∞« œd≠ s± ÍbØQ¢ .◊öª∞« «bª∑ß« q∂Æ s “UNπ∞« w≠ …bzUL∞« ‹«Ëœ√ Ë√ p¥b¥ l{Ë q∂Æ UÎLz«œ w°dNJ∞« ¸UO∑∞« ¸bB± s´ “UNπ∞« wKB≠« .‚¸Ëb∞« qî«œ VOKI∑∞« UB´ «bª∑ß« bM´ ◊öª∞U° ’Uª∞« ÍuKF∞« ¡UDG∞« VOØd¢ Vπ¥ .‚¸Ëb∞« «bª∑ß« ¸c∫¥ .…œ¸U∂∞« ‹U≤uJL∞« Wπ∞UF± bM´ jI≠ r VOKI∑∞« UB´ w±bª∑ß« .WMîUº∞« ‹U≤uJL∞« Wπ∞UF± bM´ VOKI∑∞« UB´ lDI∞« W≠U• fL∞ w∂Mπ¢Ë ‹«dHA∞« …b•Ë l± q±UF∑∞« bM´ UÎLz«œ ¸c∫∞« wîu¢ .nOEM∑∞« ¡UM£√ ‹«dHA∞U° WÅUª∞« .tF{u± w≠ ÍuKF∞« ¡UDG∞« VOØd¢ l± jI≠ ◊öª∞« qOGA¢ Vπ¥ .…œËeL∞« ‹«dHA∞« …b•Ë l± jI≠ ‚¸Ëb∞« w±bª∑ß« .¡ULK∞ qOÅu∑∞« f°UÆ Ë√ w°dNJ∞« pKº∞« ,WÆUD∞« …b•Ë ÷dF¢ ¸c∫¥ rºÆ wF§«¸ :t•öÅ≈ Ë√ “UNπ∞« h∫≠ Vπ¥ .tHK¢ W∞U• w≠ “UNπ∞« «bª∑ß« ¸c∫¥ ."¡öLF∞« W¥U´¸Ë W≤UOB∞«" .…bL∑F± dO¨ ‹UI∫K± W¥√ «bª∑ß« ¸c∫¥ W§¸œ v∞≈ WMîUº∞« ‹U≤uJL∞« b¥d∂∑° ÕULº∞« Vπ° :‚Ëd∫∞ ÷dF∑∞« d©Uª± .jKª∞« WOKL´ q∂Æ W≠dG∞« …¸«d• .tKOGA¢ ¡UM£√ WE•ö± ÊËœ “UNπ∞« wØd∑¢ ô :WÆUD∞« …b•Ë s± ◊öª∞« W∞«“≈ bM´ ;UαUL¢ ‹«dHA∞« nÆu¢ v∑• ÍdE∑≤« ● .‹«dHA∞« …b•Ë s´ ‚¸Ëb∞« wJH¢ ô ● 11 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● w°d´ WO∫O{u∑∞« ‹U±ußd∞« vK´ Íu∑∫¢ w∑∞« WO±U±ô« W∫HB∞« `∑≠ ¡U§d∞« Kenwood “UN§ «bª∑ß« q∂Æ ‹U±«bª∑ßö∞ ‰ËUM∑L∞« w≠ UN° wEH∑•«Ë WO∞U∑∞« ‹ULOKF∑∞« wzdÆ« .WOF§dL∞« WOK∂I∑ºL∞« .‹UIBK± W¥√Ë nOKG∑∞« ‹U≤uJ± wK¥“√ W¥UMF∞«" rºÆ wF§«¸ :UNKºG° ÕuLºL∞« ¡«e§_« wKº¨« ."nOEM∑∞«Ë œ«b´ù« WI°Uß Z±«d° 6 œbF° eNπ± Blend-X PRO ◊öª∞« …dOG∑L∞« ‹U´dº∞« W≤Ëd± V≤U§ v∞≈ jKª∞« ‰UL´√ lOL§ VßUM∑∞ Z±U≤d° qØ rOLB¢ r¢ .rJ∫∑∞« q±UØ p∫ML∞ wC∂M∞« qOGA∑∞«Ë ¡«uß ,“UNπ∞« UNO≠ sO±bª∑º¢ …d± qØ w≠ f≤Uπ¢ qC≠√ p∫ML∞ dOC∫∑∞ ZK∏∞« ‘d§ Ë√ ¡Uº∫∞« dOC∫∑∞ ‹U≤uJL∞« ”d≥ w≠ ‹«– ¸UD≠ù« dzUB´ dOC∫∑∞ ‹U≤uJL∞« jKî Ë√ ‹öO∑ØuJ∞« .WBKB∞« eONπ¢ Ë√ …uNI∞« »u∂• s∫© Ë√ …u¨d∞« ● ● ● p∑±öº∞ WMîUº∞« ‹U≤uJL∞« jKª° WÅUî ‹ULOKF¢ :ÂU≥ W∂¥dI∞« pLº§ ¡«e§√Ë p¥b¥ ÍbF°« ,jKª∞« ¡UM£√ W¥bK§ ‚Ëd• ÍQ° p∑°UÅ≈ VMπ∑∞ «e∑∞ô« Vπ¥ .WMJL± W¥bK§ ‚Ëd• Í√ ÀËb• ÍœUH∑∞ ÍuKF∞« ¡UDG∞« s± :WO∞U∑∞« WOzUÆu∞« ‹«œU®¸ùU° qz«uß ÃËdî tM´ Z∑M¥ bÆ W≤uªº∞« …b¥b® ‹U≤uJL∞« jKî :tO∂M¢ ● .1 Wµ∂F∑∞« W∫∑≠ Ë√ ÍuKF∞« ¡UDG∞« ‰öî s± …Qπ≠ …dª°√Ë WMîUß .UNDKî q∂Æ œd∂¢ wJ∞ WMîUº∞« ‹U≤uJL∞« „d∑° `BM≤ ● ¡Uº∫∞« q∏± WMîUß qz«uß jKî bM´ »«uØ√ 5 /q± 1200 WFß “ËUπ¢ ¸c∫¥ ● .)‚¸Ëb∞« vK´ W∫{uL∞« ‹U±öF∞« wF§«¸( ¸c∫¥Ë WMîUº∞« ‹U≤uJL∞« jKª∞ l œ«b´ù« o°Uß "¡Uº∫∞«" Z±U≤d° UÎLz«œ w±bª∑ß« ● .jKª∞« s± ‹ôU∫∞« Ác≥ q∏± l± wC∂M∞« qOGA∑∞« WHO™Ë «bª∑ß« “ËUπ∑¢ ô√ Vπ¥ ,VOK∫∞« q∏± UNDKî bM´ …u¨¸ s¥uJ¢ v∞≈ ÍœR¢ w∑∞« qz«uº∞« ● .»«uØ√ 4/q± 1000 WFß UN∑OLØ t¢U¥u∑∫±Ë ‚¸Ëb∞«Ë ◊öª∞« Ê√ YO• ‚¸Ëb∞«Ë ◊öª∞« l± q±UF∑∞« s´ ¸c∫∞« wîu¢ ● .WMîUß UNFOL§ ÊuJ∑ß t∂OØd¢ r∑O∞ ÍuKF∞« ¡UDG∞« rLÅ .ÍuKF∞« ¡UDG∞« W∞«“≈ bM´ ¸c∫∞« m∞U° wîu¢ ● ‘ULI∞« s± WFDÆ w±bª∑ß« ,…¸ËdC∞« X´œ «–≈ .»dº¢ Í√ ÀËb• VMπ∑∞ ÂUJ•S° .ÍuKF∞« ¡UDG∞« l± q±UF∑∞« bM´ p¥b¥ W¥UL∫∞ ÊdH∞« ‹«“UHÆ Ë√ …b´UI∞« wN§Ë “UNπ∞« W∞«“≈ bM´Ë …b´UI∞« vK´ ÂUJ•S° ‚¸Ëb∞« VOØd¢ s± ÍbØQ¢ ● .UÎ¥uß ‚¸Ëb∞« l± UN∑∞«“≈ s± ÍbØQ¢Ë `O∫Å qJA° ULNF{u± w≠ Wµ∂F∑∞« W∫∑≠Ë ÍuKF∞« ¡UDG∞« VOØd¢ s± ÍbØQ¢ ● .◊öª∞« «bª∑ßU° UNO≠ w±uI¢ …d± qØ q∂Æ ÂUJ•≈Ë qØ w≠ W¥uN∑∞« W∫∑≠ w≠ …œu§uL∞« W¥uN∑∞« ‹U∫∑≠ œ«bº≤« Âb´ s± ULz«œ ÍbØQ¢ ● .)q qJA∞« wF§«¸( ◊öª∞« «bª∑ßU° UNO≠ w±uI¢ …d± 10 HEAD OFFICE: Kenwood Limited, 1-3 Kenwood Business Park, New Lane, Havant, Hampshire PO9 2NH 123942/1