Download JVC GR-D201 Digital Camera User Manual
Transcript
Master Page: Right GR-D200US.book Page 27 Friday, April 11, 2003 1:05 PM EN % To protect the currently displayed file Protecting Files 9 The Protect mode helps prevent the accidental erasure of files. Press + or – to select “CURRENT”, and press SELECT/SET. The PROTECT screen appears. 10 PROTECT ME NU CURRENT PROT . AL L CANC . AL L RETURN Press REW (3) or FF (5) to select the desired file. Press + or – to select “EXECUTE”, and press SELECT/SET. ● To cancel protection, select “RETURN”. ● Repeat steps 10 and 11 for all files you want to protect. Fast-Forward Button (FF (5)) Rewind Button (REW (3)) P ROTECT PROTECTED RETURN To protect all files stored in the memory card 9 Press + or – to select “PROT.ALL”, and press SELECT/SET. The PROTECT screen appears. 10 VIDEO/MEMORY Switch SELECT/SET Button 1 2 3 4 +/- Button MENU Button Load a memory card. (墌 pg. 16) Set the VIDEO/MEMORY Switch to “MEMORY”. Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch. Open the LCD monitor fully, or pull out the viewfinder fully. ● The type of file (IMAGE or E-MAIL CLIP) which has been played back at the last time is displayed. If you want to select another type of file, go to step 5. If not, go to step 7. 5 6 7 8 Press + or – to select “EXECUTE”, and press SELECT/SET. ● To cancel protection, select “RETURN”. NOTES: ● If the “ ” mark appears, the currently displayed file is protected. ● When the memory card is initialized or corrupted, even protected files are deleted. If you do not want to lose important files, transfer them to a PC and save them. To Remove Protection Before doing the following, perform steps 1 – 8 in “Protecting Files” in the left column. To remove protection from the currently displayed file 9 Press + or – to select “CURRENT”, and press SELECT/SET. The PROTECT screen appears. Press SELECT/SET. The MEMORY SELECT screen appears. 10 Press + or – to select the desired type of file, and press SELECT/SET. 11 Press MENU. The Menu Screen appears. Press + or – to select “PROTECT”, and press SELECT/SET. The Sub Menu appears. MENU PROTECT DELETE DPOF NO . RESET FORMAT D I SPLAY RECORDING & PLAYBACK 11 Lock Button Press REW (3) or FF (5) to select the desired file. Press + or – to select “EXECUTE”, and press SELECT/SET. ● To cancel selection, select “RETURN”. ● Repeat steps 10 and 11 for all files you want to remove protection. END CONTINUED ON NEXT PAGE DIGITAL STILL CAMERA (D.S.C.) Power Switch