Download Miele KWFN 8705 SE ed Operating instructions

Switching on and off
Before using for the first time
Freezer section
The stainless steel surface has a layer
of protective foil to prevent scratching
during transportation.
^ Do not remove this foil until the
appliance has been installed or built
in. Start at one of the upper corners.
^ Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between ½ and 1 hour after
transporting it to its final location
before connecting it to the mains.
Switching on
The wine cooler and freezer section are
switched on independently of one
another so that, if required, you can
switch on only one.
Wine cooler
^ Press the wine cooler On/Off button
on the left hand side of the control
panel.
The wine cooler temperature display
will light up and the wine cooler starts
cooling.
12
^ Press the freezer section On/Off
button on the right hand side of the
control panel.
Bars light up in the freezer section
temperature display and the freezer
section starts cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Cool pack
Place the cool pack in the top freezer
drawer or to save space on the freezer
tray. The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
Switching off
^ Press the appropriate On/Off button
until the temperature display goes
out.
The cooling system is switched off. If
this does not happen, then the safety
lock has been activated.