Download Dehumidifier Use&CareGuide
Transcript
Drain hose connection method: (to drainwaterfrombucket c0n_nu0usly) _. "" damage outside or connection . Do will Not leak. center of"drQin hose connector 2. Drill out only the center of the drain hose connector. Use a minimum I/4" drill bit. 1, if your dehumidifier does not have a drain hose connector cover, go to Step 2. If your dehumidifier has a drain hose connector cover, use a fiatblade screwdriver to remove cover from drain connector.Turn cover counterclockwise. Discard cover. It cannot be reused. Go to Step 2, 3.Attach a garden hose to drain hose connector.The garden hose should not be longer than 8 feet (2.4 m). Run other end of garden hose into a floor drain.Check that the hose lies fiat and in the drain. Tousethebucketwithoutthe gardenhose: For bucket style 1: Use a garden hose cap to seal the drain hose connector. For bucket style 2: Use a garden hose cap to seal the drain hose connector. Replace drain hose connector cover. 1. Slide off the drain hose connector cover. Go to Step 2.
This document in other languages
- español: Whirlpool 1182182