Download Operating and installation instructions Gas hob CS 1028

Cleaning and care
Stainless steel surfaces
Pan supports, control knobs
Clean stainless steel surfaces with a
solution of warm water and a little
washing-up liquid applied with a soft
sponge. In the case of stubborn
dried-on soiling, soak first.
Finally, dry with a soft cloth.
Remove the pan supports. Clean
stainless steel surfaces using a solution
of warm water and a little washing-up
liquid applied with a soft sponge.
Stubborn soiling should be soaked first.
If necessary a ceramic hob and
stainless steel cleaning agent can be
used (see "Optional accessories").
Apply with even pressure following the
direction of the "grain".
Do not use stainless steel cleaning
agents on printed surfaces. This
would rub off the print. These areas
should be only cleaned with a
solution of warm water and a little
washing-up liquid applied with a soft
sponge.
A conditioning agent for stainless steel
can be used after cleaning to help keep
your appliance looking good (see
"Optional accessories").
Apply sparingly with a soft cloth
following the instructions on the
packaging.
26
After cleaning dry all surfaces with a
clean cloth.
Do not clean the pan supports in a
dishwasher.