Download Miele DA 6296 W Technical data

Cleaning and care
Cleaning the grease filters in the
dishwasher
 If a grease filter is inadvertently
replaced upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
 Place the filters as upright as
possible in the lower basket, with the
short sides upright, ensuring the
spray arm is not obstructed.
Resetting the grease filter operating
hours counter
 Use a proprietary household
dishwasher detergent.
After cleaning, the operating hours
counter needs to be re-set.
 Select a dishwasher programme with
a wash temperature between 50°C
and 65°C.
 Whilst the fan is switched on, press
the operating hours counter  for
approx. 3 seconds, until only the 1 is
flashing.
Depending on the cleaning agent
used, cleaning the filters in a
dishwasher can cause permanent
discolouration to the surface.
However, this will not affect the
functioning of the filters in any way.
After cleaning
 After cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
 When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
 Replace the grease filters, making
sure that the locking clips are facing
down towards the hob.
28
The grease filter symbol  goes out.
If you want to clean the grease filters
before the operating hours counter has
reached its maximum,
 Press the operating hours control
 for approx. 6 seconds, until only
the 1 is flashing.