Download Cisco Small Business 300 System information

2
Viewing Statistics
Viewing GVRP Statistics
To clear statistics counters:
•
Click Clear Interface Counters to clear the selected interface’s Etherlike
statistics counters.
•
Click Clear All Interface Counters to clear the Etherlike statistics counters
of all interfaces.
Viewing GVRP Statistics
The GVRP Page displays information regarding GARP VLAN Registration Protocol
(GVRP, also known as MVRP (Multiple VLAN Registration Protocol)) frames that
were sent or received from a port. GVRP is a standards-based Layer 2 network
protocol, for automatic configuration of VLAN information on switches. It was
defined in the 802.1ak amendment to 802.1Q-2005.
GVRP statistics for a port are only displayed if GVRP is enabled globally and on
the port. This is done in the GVRP Page.
To view GVRP statistics:
STEP 1 Click Status and Statistics > GVRP. The GVRP Page opens.
STEP 2 Enter the parameters.
•
Interface—Select the interface and specific interface for which GVRP
statistics are to be displayed.
•
Refresh Rate—Select the time period that passes before the GVRP
statistics page is refreshed.
The Attribute Counter block displays the counters for various types of packets per
interface.
•
Join Empty—Number of GVRP Join Empty packets received/transmitted.
•
Empty—Number of GVRP empty packets received/transmitted.
•
Leave Empty—Number of GVRP Leave Empty packets received/
transmitted.
•
Join In—Number of GVRP Join In packets received/transmitted.
•
Leave In—Number of GVRP Leave In packets received/transmitted.
Cisco Small Business 300 Series Managed Switch Administration Guide
12