Download Max RB397 Specifications

Torque dial
2 This dial allows you to adjust wire tension
torque slightly.
To increase the tension, turn it in the counterclockwise.
To decrease the tension, turn it in the clockwise.
WARNING
• When setting the main switch to ON, absolutely do not bring your hand close to the
binding part or rotating part of the tip of the
tool.
4 Set the Trigger Lock to UNLOCK and turn on
the main switch.
Reinforcing bars
Over-tightened
3 Insert the charged battery pack into the tool
until a click is heard.
Appropriate
5 Test the tool again to check the tie strength.
6 If the tie strength is not appropriate, repeat
procedures 1~5.
22