Download Sharp MT821 - MiniDisc Recorder - Metallic Specifications
Transcript
SETTING UP How to Use this Manual Contents This manual is divided into the five sections described below. To find out how to use a specific control, refer to the “Index of Parts and Controls” on page 100. SETTING UP RECORDING The first four parts of this section explain the settings necessary for each method of recording (built-in microphone, external microphones, analog, digital). The final section “Recording Operations” explains the recording modes (SP and LP), how to set the recording level, and shows you the actual recording operations (etc.). PLAYBACK This section describes the various playback operations, including how to skip and search. “Repeat Play” shows you how to repeat a track, the entire disc, or a part of a track. EDITING This section describes the various editing operations: divide, combine, move, erase, and title. ENGLISH SETTING UP This section provides information about; compatible power supplies, system presets, the internal clock, MiniDiscs, and how to connect various devices (such as microphones, audio components, a remote control, and headphones). Power Supplies ........................................................................... 6 Adjusting the System Presets .................................................. 7 Setting the Date and Time ........................................................ 8 Connecting Microphones ........................................................ 10 Connecting Analog Components .......................................... 10 Connecting Digital Components ........................................... 11 Other Connections ................................................................... 11 RECORDING Recording with the Built-in Microphone ............................ 12 Recording with External Microphones ................................ 12 Recording Line Sources ........................................................... 13 Recording Digital Sources ...................................................... 13 Recording Operation ............................................................... 14 PLAYBACK Basic Operation ......................................................................... 16 Repeat Play ................................................................................ 17 EDITING Dividing a Track ....................................................................... 19 Combining Tracks .................................................................... 19 Moving a Track ......................................................................... 20 Erasing a Disc or Track ........................................................... 20 Titling a Disc or Track ............................................................. 21 ADDITIONAL INFORMATION ADDITIONAL INFORMATION This section includes detailed information about the MD recording system, SCMS (Serial Copy Management System), troubleshooting, and explanations of various error messages that may appear in the display. The final section, “Index of Parts and Controls”, allows you look up operations of specific controls. System Limitations ................................................................... 22 SCMS Copy Protection ............................................................ 23 Troubleshooting ........................................................................ 25 Display Messages ..................................................................... 26 Specifications ............................................................................. 26 Index of Parts and Controls ................................................. 100 5