Download VINCENT CD-S2 Specifications
Transcript
OPERATING THE APPLIANCE PLAYBACK FUNCTIONS Operation Button(s) Description (6)(23) PLAY/ PAUSE This button, both on the front of the device and on the remote control, starts playing the inserted CD and the symbol “ “ appears on the display (2) during play. If there is no CD inserted, “NO DISC” appears in the display and pressing the button has no effect. If the button is pressed again while a CD is playing, play will be interrupted at the current position. This “PAUSE” mode is indicated in the display (2) by the symbol “ ”. During the pause the disc continues to rotate and when the button is pressed play continues from this position. The “PAUSE” function should only be used for brief interruptions. Direct selection of a track Number keys (19) You can start playing a track at any time by keying in the track number on the remote control. For numbers over 10, you must press the “+10” button as often as necessary until it shows the relevant first figure of the number and then you key in the second figure. If there is no track of the keyed-in number on the CD, the player switches to “STOP” mode. If the player is paused, you cannot select any other track directly with the number buttons. Stop playback (5)(25) STOP Start and pause playback Skip to the following track Skip to playback the previous track 36 Vincent (9)(32) NEXT (8)(31) BACK While a CD is being played, pressing this button stops the playing. If the player was in “PAUSE” mode, this mode will also be ended by pressing the “STOP” button. The total number of tracks on the CD and the total playing time appear in the display (2) again. This button is on both the front of the device and the remote control. When this button is pressed while the CD is playing, the current track stops playing and the next track in the sequence begins to play. If this button is pressed in “STOP” mode, you can choose all the CD tracks one after the other starting from track 02. Playback can then be started again with the “PLAY/PAUSE” button (6)(23). With the “CANCEL” button (28) the player goes back to “STOP” mode. The button is located both on the front of the device and on the remote control. If this button is pressed once while the CD is playing, the current track stops and the actual track starts playing from the start again. Further presses skip to playing the previous tracks in reverse playing sequence. If this button is pressed in the “STOP” mode, you can choose all the CD tracks in reverse order starting with the last track. Playback can then be started again with the “PLAY/PAUSE” button (6)(23). With the “CANCEL” button (28) the player goes back to “STOP” mode. The button is located both on the front of the device and on the remote control.