Download RAMSET 721 Operating instructions

DISASSEMBLY
TOOL DISASSEMBLY
1. Remove the screw and lockwasher
from the stop pin cover using the 5/32”
hex wrench provided with the tool.
REMOVE STOP PIN COVER,
SCREW & LOCKWASHER
2. Remove the stop pin cover by lifting
it up and out of the tool housing.
REMOVE STOP PIN COVER
3. Remove the stop pin spring.
REMOVE STOP PIN SPRING
4. Remove the stop pin.
REMOVE THE STOP PIN
5. Slide the barrel assembly out of the
tool housing. Note the alignment of the
slot in the barrel with the stop opening
in the tool housing.
SLIDE THE BARREL OUT OF THE
TOOL HOUSING
DISASSEMBLY
14