Download Windsor ADM8IB Operating instructions

Transcript
FILLING OPERATIONS
STEP
1
RECOVERY TANK
Remove recovery
tank
SOLUTION
TANK
STEP
2
or
Add water
8 gal.
(30.3 ltr.)
140°F (60°C)
FILL LINE
STEP
3
FILLING THE ADMIRAL
8 – 16oz.
(237ml – 473ml)
NOTE: Use clean bucket of water to fill solution tank
Add cleaning
chemical
Do not put defoamer, solvents, spotter or
prespray chemicals in the solution tank.
Do not allow water to spill into vacuum motor inlet. Dry
spillage from top of solution tank before replacing
recovery tank.
STEP
CHEMICALS
Suitable Chemicals
Alkalis
Detergents
Hydroxides
Soaps
Vinegar
Non-Compatible Chemicals
Aldehydes
Aromatic Hydrocarbons
SP Butyls
Carbon Tetrachloride
Clorox*
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene
4
Replace recovery
tank
* Product Trademark Names
ADMIRAL 86038270 05/22/07
6