Download Canon HFR17 Instruction manual

First Time Settings
Setting the Date and Time
You will need to set the date and time of
the camcorder before you can start
using it. The [Date/Time] screen will
appear automatically when the camcorder’s clock is not set.
When the [Date/Time] screen appears,
the year will be selected.
1 Change (
) the year and move (
) to the month.
2 Change the rest of the fields (month, day, hour and minutes) in the
same way.
3 Select ( ) [OK] and press
setup screen.
to start the clock and close the
NOTES
• When you do not use the camcorder for about 3 months, the built-in
rechargeable lithium battery may discharge completely and the date
and time setting may be lost. In such case, recharge the built-in lithium
battery (
158) and set the time zone, date and time again.
• The date appears in a year-month-day format only in the first setup
screen. In subsequent screen displays the date and time will appear as
day-month-year (for example, [1.Jan.2010 12:00 AM]). You can change
the date format and the clock format (12/24 hours) with the
[Date Format] setting.
• You can also change the date and time later on (not during the initial
setup). Open the [Date/Time] screen from the setup menus:
FUNC.
[
Menu]
[Date/Time]
Downloaded
From VideoCamera-Manual.com Manuals
30 Š Preparations