Download DeWalt DW567-220 Instruction manual

ELECTRIC POWER TOOLS
Model 300 Compact
Threading Machine
Complete Model 300
Convert your 300 power drive
into a low-cost threading
machine. With these low-cost
accessories and have the
speed and convenience of a
threading machine.
• Die heads and dies for use
with 300 power drive with 311
carriage
• No. 360 cutter – 1/8"–2" pipe
capacity, 1/4"–7/8" rod capacity with F-3 wheel, 5/16"–1"
with E-1032 cutter wheel
• No. 341 reamer – positive-locking 5-flute cone, right hand
1/8"–2" (special E863 RH/LH combination reamer cone available)
• No. 311 carriage with lever
• No. 1206 stand
• No. 1452 clip-on tool tray
• No. 418 oiler
• No. 819 nipple chuck
• No. 32 transporter
• No. 304 retrofit kit – converts 300 power drive to automatic
oiling using gear head assembly with oil pump, oil pan
assembly, oil spout, support bar, necessary connectors
and 1 gal. of Nu-Clear thread cutting oil
Order No.
5029.01412
5029.01415
5029.01418
Mfg. No.
42360
83540
42575
Model
1206
1206
32
5029.01421
5029.01424
5029.01427
68815
42385
42365
311
312
341
5029.01430
5029.01433
5029.01436
5029.01439
5029.01442
5029.01445
42370
42380
97345
97350
97365
46660
360
1452
304
304
—
E-863
Description
Stand for 300 power drive
Stand for 300 power drive export
Transporter (for power drives and
tri-stand vises)
Carriage with No. 312 lever
Carriage feed lever
Reamer for No. 311 carriage
with lever
Cutter for No. 311 carriage
Clip-on tool tray
Retrofit kit (38 RPM)
Retrofit kit (57 RPM)
Jaw inserts for coated pipe
LH/RH reamer cone
Same popular features as
the Model 300. A hammertype chuck comes with
replaceable rocker-action
jaw inserts. The oiling system is through-the-head,
with integral oil reservoir –
self-priming, constant-flow,
gerotor pump. The cutter is a Model 360, roll-type cutoff,
self-centering, full-floating and the reamer is a Model 344,
1/8"–2", five flute cone, right hand only.
• No. 811A quick-opening die head
• No. 344 reamer
• No. 360 cutter with E-1032 cutter wheel
• 1/2"–3/4" alloy universal die set
• 1"–2" alloy universal die set
• 1 gal. Nu-Clear threading cutting oil
Order No.
MACHINES
5029.01500
5029.01503
Mfg. No.
Model
Description
66947
67182
300
300
Compact threading machine
Compact kit (includes Model 250
folding wheel stand)
DIE HEADS
5029.01506
5029.01509
5029.01512
97075
97065
97045
815A
811A
531
5029.01515
97050
532
1/8"–2" NPT, self-opening, RH
1/8"–2" NPT, quick-opening, RH
1/4"–1" bolt, quick-opening,
RH/LH
1-1/4"–2" bolt, quick-opening,
RH/LH
STANDS
5029.01518
67657
ACCESSORIES
5029.01521
67662
5029.01524
51005
250
Folding wheel stand
—
916 groover adapter bracket
(for 300 power drive
version of 916)
Nipple chuck, 1/2"–2" NPT
819
50
Oilers
• Hand-operated, easy pumping 2-finger
trigger
• No. 418 is portable, large pan catches
oil/chip run-off
• Oil is double-filtered and recirculated
through reservoir
• Chip pan 14-1/2" diameter, 8-1/2" deep,
hose length 54"
Order No.
2049.00001
Mfg. No.
72337
2049.00004
72342
2049.00007
2049.00010
72332
72327
418
Model Description
418
Hand operated oiler complete, includes
1 gal. thread cutting oil, bucket with
removable chip tray and 54" hose
402
Hand operated oiler with attachment for
1 gal. and 5 gal. containers and 54" hose
#4
Hand operated oiler only
#4
Hand operated oiler with 54" hose
and hose fittings
743