Download Miele W 937 wps Operating instructions

Cleaning and care
Cleaning the filter in the water
inlet
The washing machine has two filters to
protect the water inlet valves.
First turn off the stopcock.
Unscrew the threaded union connecting the free end of the inlet hose
to the stopcock.
The accessible filter in the union in the
open end of the inlet hose should be
cleaned about every six months, or
after an interruption to the external
water supply.
Remove the rubber seal from the recess.
Using pointed pliers, take hold of the
plastic filter bar, remove the filter and
clean.
Put the filter and seal back in the
reverse order and reconnect the
hose.
Turn on the stopcock and check the
connection is water tight. If water drips
out, tighten the connection.
Never forget to put the filter back in
place after cleaning it.
28