Download Sartorius Basic lite Operating instructions

Setting up the Balance/Scale
Balances/Scales with an Analytical Draft Shield
Chamber:
§ Place the components listed below inside the
chamber in the order given:
– Shield plate
– Shield ring
– Pan support
– Weighing pan
– Gem tray (only with GC models)
Balances/Scales with a Glass Draft Shield:
§ Place the components listed below inside
the chamber in the order given:
– Draft shield base – place it on the balance/scale so
that the edge for fitting the glass draft shield faces
upwards and turn it until it is firmly in place
– Pan support
– Weighing pan
– Glass draft shield
– Draft shield cover – place it on the balance/scale so
that the edge faces downwards
Balances/Scales with a Round Weighing Pan
§ Place the components listed below inside
the chamber in the order given:
– Pan support
– Weighing pan
Balances/Scales with a Rectangular Weighing Pan:
§ Place the weighing pan on the balance/scale
5