Download Mazda 2007 CX-7 Specifications

CX-7_8V28-EA-06B_Edition2 Page331
Monday, March 13 2006 5:7 PM
Black plate (331,1)
Maintenance and Care
Owner Maintenance
NOTE
l
To replace the bulb, contact an
Authorized Mazda Dealer.
l
If the halogen bulb is accidentally
touched, it should be cleaned with
rubbing alcohol before being used.
l
Use the protective cover and carton
of the replacement bulb to dispose of
the old bulb promptly out of the
reach of children.
3. Turn the screws and the center section
of the plastic retainers
counterclockwise and remove them,
then partially peel back the mudguard.
Removal
Installation
Low-beam bulb
(Xenon fusion bulb)
You cannot replace the low beam bulbs by
yourself.
The bulbs must be replaced at an
Authorized Mazda Dealer.
(Halogen bulbs)
4. Detach the electrical connector from
the bulb by pulling it to the rear.
1. Make sure the headlight switch is off.
2. If you are changing the right Lowbeam bulb, start the engine, turn the
steering wheel all the way to the right,
and turn off engine. If you are
changing the left Low-beam bulb, turn
the steering wheel to the left.
5. Pull off the sealing cover.
6. Unhook the bulb retaining spring.
8-35
Form No.8V28-EA-06B