1
Download Operating Instruction
Transcript
Building in the appliance Installing the appliance ^ Carefully remove the protective foil from sealing strip i. ^ Fix sealing strip i flush with the front of the appliance on the door opening side. 1. Position the sealing strip flush with the lower edge of the top fixing. 2. Stick it down along its entire length. ^ Screw the lower fixing bracket j using screws k loosely into the bottom of the appliance. ^ Push the appliance into the niche: – until the top fixing bracket c touches the front edge of the furniture side wall. – until the front edge of lower left-hand fixing bracket j and the lower right-hand fixing bracket is flush with the front edge of housing unit base. A gap of 42 mm (from the appliance carcase to the front edge of the furniture side walls) must be maintained. 60
