Download Winget 400R Technical information
Transcript
SERVICING DRIVE ALIGNMENT Alignment of motor drive shaft and reversing box must be within 1mm (0.40”). DYNAMO BELT ADJUSTMENT Slacken the two bolts on the dynamo adjusting link and the two bolts securing the dynamo to its mounting bracket. Pivot the dynamo until the drive belt is correctly tensioned. The permissible belt deflection halfway between the pulleys is 12mm. Retighten bolts securely. BOLT TORQUES Every week for the first month, then every three months: Check the tightness of all bolts, nuts, and keys etc. Pay particular attention to engine mounting bolts. 3.5