Download Zhone 12000E User`s guide

DEFAULTS
This chapter provides descriptions of defaults. basic configuration of the
EtherXtend:
•
Modes on page 105
•
EFM Port Default, page 106
•
PME Defaults, page 107
The defaults fall into several categories:
•
Modes. Indicates whether the device is in an active or passive way of
operating.
•
Port
•
PME Profile
•
EFM-OAM
•
EFM-OAM-Event
•
EFM-OAM-Entry
•
EFM Loopback
Modes
DTEs incorporating the OAM sublayer support Active and/or Passive mode.
When OAM is enabled, a DTE capable of both Active and Passive modes
shall select either Active or Passive. The following table indicates the
behavior of Active and Passive mode DTEs.
Table 21: Active and Passive Mode
Capability
Active DTE
Passive DTE
Initiates OAM Discovery process.
Yes
No
Reacts to OAM Discovery process
initiation.
Yes
Yes
Required to send Information
OAMPDUs
Yes
Yes
EtherXtend User’s Guide
105