1
Download BrightSign XD1230 User guide
Transcript
APPENDIX A – REMOTE CONTROL PROTOCOLS Currently, BrightAuthor only supports the NEC remote control protocol. If you’d like to send or receive IR commands using Pronto Hex Code (PHC), you will need to use a custom script plug-in (see the BrightSign GitHub™ page for more details). Complete the following steps to set up your BrightSign player to communicate with an IR transmitter or receiver: 1. Create an Interactive Presentation. 2. Define either a Remote Input event or a Send IR Remote command. 3. Specify the remote input with any of the following remote control codes: WEST EAST NORTH SOUTH SEL EXIT PWR MENU SEARCH PLAY FF RW PAUSE ADD SHUFFLE REPEAT VOLUP VOLDWN Appendix A – Remote Control Protocols 153
