Download Bakers Pride P18S Operating instructions

INSTALLATION AND OPERATING INSTRUCTIONS
COUNTER TOP ELECTRIC OVENS
INTENDED FOR OTHER THAN HOUSEHOLD USE
Models: PX-14, PX-16, P-18, BK-18, P-22S, P-22BL,
P-24S, P-44S, P-44BL, P-46S, P-48S, DP-2
RETAIN THIS MANUAL FOR FUTURE REFERENCE
OVEN MUST BE KEPT CLEAR OF COMBUSTIBLES AT ALL TIMES
!
FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
!
!
WARNING: Improper installation, adjustment, alteration, service or maintenance
can cause property damage, injury or death. Read the Installation, Operating and
Maintenance Instructions thoroughly before installing or servicing this equipment.
Initial heating of oven may generate smoke or fumes and must be done in a well
ventilated area. Overexposure to smoke or fumes may cause nausea or dizziness.
!
Note: Only Pizza or Bread can have direct contact with ceramic decks. All other food products must be
placed in a pan or container to avoid direct contact with ceramic decks.
LA
SSIFIE
D
C
This equipment has been engineered to provide you with year round dependable service when used
according to the instructions in this manual and standard commercial kitchen practices.
C
P/N U4008A 1/08
BAKERS PRIDE OVEN CO., INC.
30 Pine Street
New Rochelle, NY 10801
(914) 576-0200 Phone
(914) 576-0605 Fax
(800) 431-2745 US & Canada
www.bakerspride.com Web Address
1
CONTENTS
INSTALLATION INSTRUCTIONS
SECTION
1
2
3
4
ITEM
Location
Electrical Connections
Requirements for Installation
Initial Start Up
PAGE
2
2
3
3
OPERATING INSTRUCTIONS
SECTION
1
2
3
4
5
6
ITEM
General Baking
General Baking Tips
Special Features
Cleaning
Service and Trouble Shooting
Installation of Decks
PAGE
3
4
4
5
5
6
WIRING DIAGRAMS & SCHEMATICS
ITEM
PAGE
P Series - 2 Chamber - 1 Ph, 2 W or 3 Ph, 3 W (Wiring Diagram)
7
P Series - 2 Chamber - 3 Ph, 4 W - Star (Wiring Diagram)
8
P Series - 1 Chamber - 3 Ph, 4 W - Star (Wiring Diagram)
9
P Series - 1 Chamber - 1 Ph, 2 W or 3 Ph, 3 W (Wiring Diagram)
10
P Series Counter Top Ovens - 2 Chamber (Schematic)
11
P Series Counter Top Ovens - 1 Chamber (Schematic)
11
PX-14 & PX-16 (Wiring Diagram & Tables)
12
PARTS LISTS & WARRANTY
ITEM
PX -14, PX-16 (New Style)
PX -14, PX-16 (Old Style)
P18-S & BK18
P-22BL, P-22S & P-24S
P-44S, P-44BL & P-48S
DP-2
Warranty
PAGE
13
14
15-16
17-18
19-20
21-22
23
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain this manual for the life of the equipment. For
Warranty Service and/or Parts, this information is required.
Model Number
Serial Number
Date Purchased
INSTALLATION INSTRUCTIONS
Minimum Clearance for Installation
From combustible or non-combustible construction:
Right side, Left side and Back:
3” (76mm)
1. LOCATION
Due to the heat a counter-top oven may produce, it must be placed on a non-combustible surface.
Do not store combustible materials on top of any oven.
2. ELECTRICAL CONNECTIONS
Suitable means, which will disconnect all ungrounded conductors of the circuit simultaneously,
must be provided by the installer.
Make sure electrical supply corresponds with that specified on the rating plate located in the rear of
the oven.
When installed, the unit must be connected by an earthing cable to all other units within the
complete installation and thence to an independent earth connection.
Use copper conductors only, rated at 90° C.
If a line cord is used for the installation of the unit in Europe, it should be a minimum of H07RN-F type
conforming to EN60 335-1 and/or local codes.
2
Use minimum conductor size as below:
!
!
For models PX-14, PX-16, P-18, BK-18 and P-24S:
14 Gauge (1.5mm) for 220-240V, single phase supply.
For models P-22S, P-22BL, P-44S, P-44BL, P-46S, P-48S and DP-2:
10 Gauge (2.5mm) for 220-240/380-415V, 3 phase supply.
3. REQUIREMENTS FOR INSTALLATION
For portable units (Model PX-14 and PX-16) there are no special requirements.
For shipping purposes the optional 4” (100mm) legs are not mounted. For mounting legs, follow
steps a. through g.
a.
b.
c.
d.
e.
f.
g.
Remove the outer shipping carton and paper and place the oven on the floor or other flat
surface.
Remove legs, baking decks and any other materials from inside the unit.
With sufficient help, tilt the unit back far enough to mount the two front legs and tighten with
an adjustable wrench.
After the front legs are tight, lift rear of unit approximately 5” (125mm) off the surface and
block in position using wood or some other solid material. Now mount the two rear legs and
tighten.
Using the proper lifting equipment, move the unit to its final location.
Adjust the bottom portion of legs to make level.
Slide baking decks into each shelf. (View on Page 7)
4. INITIAL START UP
After the electrical connections have been made, the oven will need approximately 2 to 3 hours to
burn off. Initial heating of the oven may generate smoke or fumes and must be done in a well
ventilated area.
CAUTION: OVEREXPOSURE TO SMOKE OR FUMES MAY CAUSE NAUSEA AND DIZZINESS.
For initial heating of the new oven, follow the steps below:
!
!
!
!
Place the oven in a well ventilated area.
Open the oven doors and remove any instructions or samples shipped within the unit. Make
sure the oven cavity is empty and the baking decks are properly installed.
With the oven doors open, turn the temperature knobs to 400° F (205° C) for one hour.
Close the oven door. Increase the temperature to 500° F (260° C) for at least 1 ½ hours.
This procedure will dry out the insulation and deck material and will help to insure optimum baking
results thereafter.
OPERATING INSTRUCTIONS
Note: Only Pizza or Bread can have direct contact with ceramic decks. All other food products must be
placed in a pan or container to avoid direct contact with ceramic decks.
1. GENERAL BAKING
Models: P-18, BK-18, P-22S, P-22BL, P-24S, P-44S, P-44BL, P-46S, P-48S, PX-14 and PX-16
Preheat the oven by setting the thermostat to the desired temperature. When the thermostat light
goes out and has cycled three times, the oven is ready for use.
These ovens have been designed to bake both fresh and frozen products. Frozen fruit pies should
be taken directly from the freezer and placed into the oven. Cooking time will vary with the size of the
pie, but under normal conditions a frozen pie should bake approximately in the same time as a fresh
pie.
3
These ovens work well for toasting, melting cheese, baking frozen entrees, roasting small meat
items, etc.
The temperature range for pizza baking is usually between 500° F (260° C) and 575° F (300° C)
depending on the individual product.
Allow the pizza to bake until the cheese bubbles and the bottoms are evenly brown. (Rotate if
necessary)
The design of the PX-14 and PX-16 is such that normal baking temperature may be too high for
good results. Set the thermostat approximately 25° F (15° C) BELOW normal setting. Adjust
temperature as needed.
Do not keep the oven door open too long when loading since heat will escape, resulting in slower
baking.
When production requirements are low, keep the temperature low to prevent the bottoms from
burning.
As demand increases, temperature should be raised for faster recovery.
Fresh dough generally requires a slightly lower baking temperature and longer bake time than
defrosted pre-baked crusts.
2. GENERAL BAKING TIPS
!
!
!
!
!
!
!
!
!
Pizza crusts should be fully defrosted before baking.
Wet areas on the bottom of a pizza will cause them to stick to the deck. Avoid spills.
For fresh dough pizza, flour or corn meal on the peel will prevent sticking and ease
placement of the pizza on the deck.
Increasing bake temperature during heavy production assists in maintaining temperature.
After the rush is over, reduce temperature to prevent burning.
Heavily topped pizzas require longer bake times at lower temperatures.
Placing a screen under pizza will allow the top to cook without overcooking the bottom.
Frequently scrape and brush off decks to remove burned residue which can cause an off
flavor to the product. Residue build-up can slow bake times. A deck scraper/brush
specifically designed for this is available from BAKERS PRIDE.
Clean heavily soiled pizza decks by scraping down, brushing off, removing from oven,
turning over and putting back. This procedure will burn off the decks and should be repeated
every six months. DO NOT USE WATER TO CLEAN THE DECKS as this could cause the
decks to crack.
Using shiny pans or screens will produce products with light bottom color. We strongly
suggest that all pans and screens be seasoned before use.
3. SPECIAL FEATURES
Timer: An electric timer is provided to give an audible, continuous signal at the end of a preset time
up to 15 minutes (18 minutes with 50Hz supply) on pizza ovens, or 60 minutes (72 minutes with
50Hz supply) on bake ovens,
Optional Electronic Timer: A Digital electronic 99 minute timer can be provided on all models to give
an audible signal at the end of a pre-set time.
Note: TIMER DOES NOT CONTROL THE OVEN.
For PX-14 and PX-16 only: Individual switches are provided to turn off the top or the bottom heating
element. This allows baking items that do not require direct top or bottom heat.
4
For DP-2 only: Optional infinite control switches can be provided for fine balancing of top and
bottom heat.
4. CLEANING
Periodic cleaning is suggested to keep your oven in good shape.
ALWAYS CLEAN THE OVEN WHEN IT IS COLD.
WHEN CLEANING STAINLESS STEEL, ALWAYS WIPE IN THE DIRECTION OF THE GRAIN.
Scrapers, brushes and stainless steel cleaner can be ordered from BAKERS PRIDE for this
purpose.
From time to time the spillage should be scraped out. For hard to clean spillage, the following is
suggested:
!
!
!
Turn the thermostat up to the highest setting and let the oven run for ½ hour with the door
closed.
Allow the oven to cool down.
Brush the residue from deck.
Note: DO NOT USE WATER TO CLEAN DECKS. CRACKING MAY RESULT.
Stainless steel surfaces should be cleaned with BAKERS PRIDE STAINLESS STEEL CLEANER.
5. SERVICE AND TROUBLE SHOOTING
The ovens are designed to be as trouble free as possible. Keeping the oven clean is all that is
normally required. All servicing should be performed by a factory authorized technician only.
However, if your oven stops operating, please check the following:
!
!
Power supply cord is plugged into the supply receptacle.
Power supply fuse/circuit breaker has not tripped.
If the oven still does not operate, take the following steps:
!
!
Disconnect the power supply to the unit by removing the supply cord and/or turning off the
main switch.
Contact the factory, factory representative or an authorized service agency.
Note: Infinite control switches must be in a set position (other than off) in model DP-2 with optional infinite
switches, for elements to operate.
A system wiring diagram is a part of this manual and is provided on the back of the unit.
For further information and to purchase the deck scraper/brush, or stainless steel cleaner, call BAKERS
PRIDE at: (914) 576-0200.
5
TROUBLESHOOTING CHART
PROBLEM
PROBABLE CAUSE
SOLUTION
Indicator light is out
Set temperature has been
reached.
Take no action. The thermostat has
turned off the power to the heat control
switches, indicator lamps, contactors and
heating elements. When oven starts to
cool, all functions will be restored.
Turn switches to a position other than
"OFF". This will allow indicator lamps,
contactors and heating elements to
operate.
Replace fuse or reset circuit breaker.
The infinite top and bottom heat
control switches are "OFF". (DP-2
w/Infinite Switches only)
No power
Oven too Hot
Power supply fuses or circuit
breakers are blown or have been
tripped.
Power cord is unplugged.
Power supply fuses or circuit
breakers are blown or have been
tripped.
Power cord is unplugged.
Thermostat set too high.
Thermostat may be defective.
Bottom of pies are
undercooked
Bottom of pies burn
before toppings are
cooked
Pies cook unevenly
Bottom infinite switch set too low.
(DP-2 w/Infinite Switches only)
Top Infinite switch set too high.
(DP-2 w/Infinite Switches only)
Deck temperature too hot especially during slow periods.
Bottom infinite switch set too high.
(DP-2 w/Infinite Switches only)
Top Infinite switch set too low.
(DP-2 w/Infinite Switches only)
Area's adjacent to oven walls are
generally hotter.
Plug in power cord.
Replace fuse or reset circuit breaker.
Plug in power cord.
Lower the thermostat setting. Allow
ample time for heat to regulate.
Call local authorized Bakers Pride
Service Agent.
Increase setting.
Decrease setting.
Reduce Thermostat setting by 50° - 75°
below normal bake temperature. When
decks cool begin cooking and
immediately increase the thermostat
setting by 50° - 75°.
Decrease setting.
Increase setting.
Rotate pies (180°), once during each
bake or keep to the center of oven.
6. INSTALLATION OF DECKS
DECK
DECK
6
ELECTRICAL WIRING DIAGRAMS, SCHEMATICS AND TABLES
P-SERIES 2 CHAMBER - 1 PH, 2 W OR 3 PH, 3 W - ELECTRICAL WIRING DIAGRAM & TABLES
L2
L3
WT11
WT22
1 OR 3
240V
1 OR 3
UC
BK8
BK14
WT13
BR15
UPPER
BAKE
CHAMBER
P48S
200
208
240
208
208
240
200
BUZZER
TIMER 250V
BK16
BR17
208
240
200
P44S
208
240
200
P44SH 208
240
BK18
BK18
230
200
208
230
200
208
230
200
208
230
200
THERMOSTAT
EGO 3 POLE
2 3 5 6
BR3
BR1
BK2
WT22
WT11
CIRCUIT PILOT
BREAKER LIGHT
PILOT
LIGHT
BR7
BR5
WT24
BR17
BK18
ELECTRONIC
TIMER 250V
(OPT)
BK4
CIRCUIT THERMOSTAT
BREAKER EGO 3 POLE
BK4
BK2
BK14
WT22 WT11
WT13
BR3
BR1
ROBERTSHAW
THERMOSTATS
BK4
2 3 5 6
BR17
BK18
ELECTRONIC
TIMER 250V
(OPT)
22.0
AMP - W. LIGHT
USA
L1
L1
CAN
6-30P
19.0 6-30P
6-30P
25.5 6-30P
34.6
L3
11.0 11.0 22.0 11.4 11.4 22.0
9.3
9.3 18.7
9.7
9.7 18.7
6-50P
15.7 15.7 18.7 16.2 16.2 18.7
25.3 25.3 21.5 26.1 26.1 21.5
24.3 24.3 20.7 25.0 25.0 20.7
32.1 6-50P
230
L2
18.0 18.0 21.5 18.6 18.6 21.5
17.3 17.3 20.7 17.9 17.9 20.7
36.0 36.8
34.6 35.4
31.3
L3
10.8 10.8 21.5 11.2 11.2 21.5
10.3 10.3 20.7 10.7 10.7 20.7
28.8 29.4
27.6 28.2
25.0
L2
12.6 12.6 25.3 13.0 13.0 25.3
12.1 12.1 24.3 12.5 12.5 24.3
22.3 6-30P
208
COIL LOCATION
AMP - NO LIGHT
21.5 21.9
20.7 21.1
18.7
3 PHASE - 3 WIRE
PLUG & NO.
25.3 25.7
24.3 24.7
39.8 40.6
38.2 39.0
6-50P
22.0 22.0 18.7 22.7 22.7 18.7
27.1 27.1 25.3 27.9 27.9 25.3
26.1 26.1 24.3 26.9 26.9 24.3
35.3 6-50P
6-50P
23.6 23.6 22.0 24.3 24.3 22.0
WATT PER HEATING COIL & TOTAL WATT PER UNIT
DP2
P48S
P46S
P44S
P44SH
1,075
---
1,075
1,075
1,075
UC - UPPER CTR
1,075
---
1,450
1,450
1,450
UB - UPPER BOTT
1,450
1,075
1,075
1,075
1,450
LT - LOWER TOP
1,075
---
1,075
---
1,075
1,075
LC - LOWER CTR
1,075
---
1,450
1,450
LB - LOWER BOTT
1,450
1,075
1,075
1,075
1,450
TOTAL NO LIGHT
5,050
4,300
5,750
7,200
7,950
TOTAL W. LIGHT
5,080
4,330
5,795
7,260
8,010
UT - UPPER TOP
BR3
AMPERE
COILS NO L. W. L.
200
200
P46S
BK20
BR27
2, 3 OR 4 AS REQUIRED
LIGHT
SWITCH
(OPT)
BK16
VOLT A/C
UNIT
DP2
BK28
BK16
BR15
LIGHT
SWITCH
(OPT)
MODEL
UT
21 WT
BK10
208V
UPPER HEATING COILS
BK2
BR1
WT 21
BK26
BR17
250V LAMPS (OPT)
BR27
BR7
BR25
BK28
I PHASE - 2 WIRE
1 OR 3
UB
WT24
BR29
BR5
LC
BUZZER
7
TIMER 250V BK16
BR23
WT22
WT11
LT
LOWER LB
BAKE
CHAMBER
200V
TERMINAL
BLOCK
3 PHASE
LOWER HEATING COILS
BK2
BR1
BR23
BK10
TERMINAL
BLOCK
1 PHASE
BK30
L1
L2
BR19
L1
DWG. 1012-120 10/09/00
P-SERIES 2 CHAMBER - 3 PH, 4 W - STAR - ELECTRICAL WIRING DIAGRAM & TABLES
L1
N
L2
BR1
BK2
WT
11
BUZZER
WT13
UPPER
BAKE
CHAMBER
BK16
BK28
UNIT
COILS
P46S
P44S
P44SH
BK18
BK18
BR1
BK2
BR1
BK2
WT11
BL31
BK4
WT42
BK40
BR41
2 3 5 6
BL35
BK18
ELECTRONIC
TIMER 250V
(OPT)
CIRCUIT PILOT
BREAKER LIGHT
BK12
BR37
WT24
L2
L3
N
L1
L2
L3
N
22.0 - - - - - - 22.0 22.3 - - - - - - 22.3
9.3 0.0 12.6 3.3 9.7 0.0 12.6 2.9
230
230
230/400
230
230
230
230/400
230
18.7 - - - - - - 18.7 19.0 - - - - - - 19.0
9.3 0.0 9.3 - - - 9.7 0.0 9.3 0.4
230
230
25.0 - - - - - - 25.0 25.5 - - - - - - 25.5
230/400
230
230
230
230/400
230
230
230
230/400
230
COIL LOCATION
BR1
PILOT
LIGHT
BK2
ROBERTSHAW
THERMOSTATS
1 OR 2 AS REQUIRED
CIRCUIT THERMOSTAT
BREAKER EGO 3 POLE
BR39
BK8
WT13
9.3
6.3
9.3
3.0
9.9
6.3
9.3
3.6
31.3 - - - - - - 31.3 32.0 - - - - - - 32.0
9.3 12.6
9.3
3.3 10.0 12.6
9.3
3.3
2 3 5 6
BL35
BK18
ELECTRONIC
TIMER 250V
(OPT)
34.6 - - - - - - 34.6 35.3 - - - - - - 35.3
9.3 12.6 12.6
3.3 10.0 12.6 12.6
2.6
WATT PER HEATING COIL & TOTAL WATT PER UNIT
DP2
P48S
P46S
P44S
P44SH
1,075
---
1,075
---
1,075
1,075
1,075
UC - UPPER CTR
1,450
1,450
1,450
UB - UPPER BOTT
1,450
1,075
1,075
1,075
1,450
LT - LOWER TOP
1,075
---
1,075
---
1,075
---
1,075
1,075
LC - LOWER CTR
1,450
1,450
LB - LOWER BOTT
1,450
1,075
1,075
1,075
1,450
TOTAL NO LIGHT
5,050
4,300
5,750
7,200
7,950
TOTAL W. LIGHT
5,080
4,330
5,795
7,260
8,010
UT - UPPER TOP
THERMOSTAT
EGO 3 POLE
L1
AMPERE - W. LIGHT
BL35
TIMER 250V
LIGHT
SWITCH
(OPT)
BK16
LIGHT
SWITCH
(OPT)
UB
BK20
BL34
BL52
BK16
BK 26
BL35
DP2
P48S
UC
BK8
(BL53)
BL33
BL52
BL36
BL36
BK12
WT24
BR37
BUZZER
8
TIMER 250V
BK16
BL32
BL35
BK28
1)
3N
AMPERE - NO LIGHT
VOLT A/C
UT
2, 3 OR 4 AS REQUIRED
5
BL52
LB
BL34,45,45
5,4
BL52
LC
(230V
400V
UPPER HEATING COILS
(BL53)
4,4
LOWER HEATING COILS
250V LAMPS (OPT)
BL 3
BR1
BK2
WT11
TERMINAL
BLOCK
3 PHASE
LT
LOWER
BAKE
CHAMBER
MODEL
L3
TERMINAL
BLOCK
1 PHASE
BR39
L1 BR54
N
DWG. 1012-124 10/11/00
P-SERIES 1 CHAMBER - 3 PH, 4 W - STAR - ELECTRICAL WIRING DIAGRAM & TABLES
L1 BR54
N
N
L2
L1
L3
BL52
BK28
BK 26
BUZZER
9
TIMER 250V
BK16
BK2
WT22
BR1
BK18
P18S
BL35
P24S
BL34
P22SH
P22S
LIGHT
SWITCH
(OPT)
BK16
UNIT
COILS
230
230
230/400
230
230
230
230/400
230
L3
7.4 - - - - - 0.0 3.7
3.7
N
7.4
0.0
L1
L2
L3
N
7.6 - - - - - - 7.6
0.2 3.7 0.2
3.7
12.4 - - - - - - 12.4 12.7 - - - - - - 12.7
3.7 4.3 4.3 0.6 3.7 4.7 4.3 1.0
230
9.3 - - - - - -
9.3
9.5 - - - - - -
9.5
230
4.7
0.0
4.8
0.2
230
230
230/400
230
230
230
230/400
230
BE - BOT ELEMENT
0.0
4.7
0.2
4.8
15.7 - - - - - - 15.7 16.0 - - - - - - 16.0
4.7
6.3
4.7
1.4
4.7
6.7 4.7
4.7
6.3
6.3
1.6
4.7
6.7
6.3
BK18
850
---
P24S
P22S
P22SH
1,075
1,075
1,000
1,075
---
1,450
1,450
P18S
850
850
1,000
1,075
1,075
1,450
BR1
2,850
2,150
3,600
3,975
WT22
TOTAL W. LIGHT
1,715
2,880
2,165
3,630
4,005
BK4
CIRCUIT
BREAKER
BR12
BR37
WT24
PILOT
LIGHT
BR1
ROBERTSHAW
THERMOSTAT
CIRCUIT
BREAKER
2.0
WATT PER HEATING COIL & TOTAL WATT PER UNIT
1,700
BK2
2.0
17.3 - - - - - - 17.3 17.6 - - - - - - 17.6
TOTAL NO LIGHT
BL31
BL35
BK18
ELECTRONIC
TIMER 250V
(OPT)
L2
230
TE - TOP ELEMENT
2 3 5 6
L1
AMPERE - W. LIGHT
230/400
COIL LOCATION
BK18
THERMOSTAT
EGO 3 POLE
AMPERE - NO LIGHT
VOLT A/C
BL32
BL36
BK12
BR37
BE
BL31,32,34
4
BL52
CE
(BL53)
2,3
1)
3N
MODEL
250V LAMPS (OPT)
1 OR 2 AS REQUIRED
1,3
HEATING COILS
TE
(230V
400V
TERMINAL
BLOCK
3 PHASE
WT24
BL 3
BR1
BK2
WT22
TERMINAL
BLOCK
1 PHASE
DWG. 1012-128 10/11/00
P-SERIES 1 CHAMBER - 1 PH, 2 W or 3 PH, 3 W - ELECTRICAL WIRING DIAGRAM & TABLES
L2
L1
L3
L1
L2 (N)
TERMINAL
BLOCK
3 PHASE
TERMINAL
BLOCK
1 PHASE
VOLT A/C
CE
WT22
COILS
100
120
100
L3
AMP - W. LIGHT
L1
L2
L3
AMPERE
NO L. W. L.
17.0 17.4
USA
CAN
JAPAN
14.2 14.5
5-15P
5-20P
5-20P
6-15P
6-15P
6-15P
5-15P
5-20P
5-20P
6-15P
6-20P
6-15P
BS 1363A CEE 7-VII
6-15P
6-15P
6-15P
BS 1363A CEE 7-VII
8.5
0.0
8.5
8.7
0.2
8.5
208
8.2
0.0
8.2
8.4
0.2
8.2
8.5
8.2
8.7
8.4
230
8.1
0.0
8.1
8.2
0.1
8.1
8.1
8.2
100
120
100
18.0 18.8
120
200 14.3
208 13.7
15.0 N/A
250V LAMPS (OPT)
1 OR 2 AS REQUIRED
BR27
WT24
BR7
BK28
BK26
BR17
208
240
BR15
200
P24S
208
240
200
P22S
LIGHT
SWITCH
(OPT)
BK16
208
240
200
208
240
BK18
BR3
THERMOSTAT
EGO 3 POLE
BR1
BK2
WT24
9.3 14.7
5.4
9.3
4.8
8.9 14.1
5.2
8.9
14.3 14.7
13.7 14.1
230 13.5
200 10.8
208 10.3
4.7
8.8 13.9
5.1
230 10.2
200 18.0
208 17.3
8.8
13.5 13.9
0.0 10.8 11.0
0.2 10.8
0.0 10.3 10.5
0.2 10.3
10.8 11.0
10.3 10.5
0.0 10.2 10.4
0.2 10.2
10.2 10.4
7.2 10.8 18.4
7.7 10.8
7.0 10.3 17.7
7.4 10.3
18.0 18.4
17.3 17.7
230 17.1
200 19.9
208 19.1
6.9 10.2 17.4
7.2 10.2
17.1 17.4
7.2 12.6 20.3
7.7 12.6
7.0 12.1 19.5
7.4 12.1
19.9 20.3
19.1 19.5
230 18.8
6.9 12.0 19.2
7.2 12.0
18.8 19.2
UK
N/A
EUROPE
N/A
CEE 7-VII
CIRCUIT
BREAKER
PILOT
LIGHT
CIRCUIT
BREAKER
BR3
BR1
BR7
BR5
BR3
BR1
BK16
TO SWITCH
(OPT)
WT22
WT24
ROBERTSHAW
THERMOSTAT
SINGLE POLE
WITH SWITCH
BK2
(WT22 NOT USED)
ROBERTSHAW THERMOSTAT
SINGLE POLE NO SWITCH
1 PHASE ONLY
A
N/A
6-30P
6-20P
6-20P
6-20P
6-20P
6-30P
6-20P
P18S-1
P18S-2
600
850
CE - CTR ELEMENT
850
---
BE - BOT ELEMENT
850
600
600
TOTAL NO LIGHT
1,700
TOTAL W. LIGHT
1,715
N/A
N/A
N/A
N/A
N/A
WATT PER HEATING COIL & TOTAL WATT PER UNIT
BK18
TE - TOP ELEMENT
BK18
BR7
BR5
5.0
COIL LOCATION
BR3
WT22
BR17
BK18
ELECTRONIC
TIMER 250V
(OPT)
L2
208
240
200
P18S-2
P22SH
2 3 5 6
AMP - NO LIGHT
L1
120
200
200
P18S-1
BR25
BK16
UNIT
PLUG CONFIGURATION & NUMBER
BE
BUZZER
10
TIMER 250V
BK18
WT 21
BR29
TE
BR5
1
1
1 OR 3
1 OR 3
1 OR 3
1 OR 3
BK2
BK10
BR1
WT22
BK10
BK2
BR1
100V
120V
200V
208V
230V
240V
1 PH - 2 W
3 PHASE - 3 WIRE
MODEL
HEATING COILS
DWG. 1012-127 10/9/00
P24S
P22S
P22SH
1,075
1,075
1,000
1,075
---
1,450
1,450
1,000
1,075
1,075
1,450
1,800
2,850
2,150
3,600
3,975
1,830
2,880
2,165
3,630
4,005
P-SERIES - 2 CHAMBERS - ELECTRICAL WIRING SCHEMATICS DWG. 1012-126 10/11/00
200V
208V
240V
L1
1
1
1
L2
200V
208V
240V
L1
3
3
3
UT
UPPER CHAMBER
L3
N
400V
UT
UC
P
UC
TH
UB
UB
TH
UT
TH
L
L
LS
L
M
B
CB
CB
M
B
T
CB
LS
LS
LS
L
M
M
B
T
P
P
LT
LC
TH
LB
TH
TH
LT
LT
LC
LC
LB
LB
TH
L2 (N)
200V
208V
240V
L1
L
L
CB
LS
CB
TH
L2
L3
L1
B
L
CB
B
T
LS
CB
T
P
TE
TE
TE
CE
CE
CE
BE
BE
BE
TH
TH
LEGEND
N, L1, L2, L3 = FROM TERMINAL BLOCK
TH = THERMOSTAT 2 POLE (3 POLE)
P = THERMOSTAT INDICATOR LIGHT
CB = CIRCUIT BREAKER
M = SYNCHRONOUS TIMER (OR TIMER MOTOR)
T = INTERVAL TIMER CONTACTS (IF PROVIDED)
B = BUZZER (IF PROVIDED)
LS = LIGHT SWITCH DPST ON-OFF (IF PROVIDED)
L = INTERIOR LIGHTS (IF PROVIDED)
L3
M
CB
P
TH
L2
L
M
T
3N
N
LS
L
CB
P
TH
400V
3
3
3
M
B
TH
DWG. 1012-129 10/11/00
L
LS
TH
HEATER COILS
UT = UPPER CHAMBER, TOP ELEMENT
UC = UPPER CHAMBER, CENTER ELEMENT (P44 & P46 ONLY)
UB = UPPER CHAMBER, BOTTOM ELEMENT
LT = LOWER CHAMBER, TOP ELEMENT
LC = LOWER CHAMBER, CENTER ELEMENT (P44 ONLY)
LB = LOWER CHAMBER, BOTTOM ELEMENT
P-SERIES - 1 CHAMBER - ELECTRICAL WIRING SCHEMATICS
1
1
1
1
1
1
TH
TH
LEGEND
N, L1, L2, L3 = FROM TERMINAL BLOCK
TH = THERMOSTAT 2 POLE (3 POLE)
P = THERMOSTAT INDICATOR LIGHT
CB = CIRCUIT BREAKER
M = SYNCHRONOUS TIMER (OR TIMER MOTOR)
T = INTERVAL TIMER CONTACTS (IF PROVIDED)
B = BUZZER (IF PROVIDED)
LS = LIGHT SWITCH DPST ON-OFF (IF PROVIDED)
L = INTERIOR LIGHTS (IF PROVIDED)
LS
T
P
TH
LS
L
M
B
T
100V
120V
200V
208V
230V
240V
CB
L
L
B
L1
T
CB
CB
L
L
LS
L
M
B
T
TH
L
L
LS
LS
TH
UB
TH
LS
L3
L2
TH
UC
TH
TH
LS
L1
3N
P
P
LOWER CHAMBER
L2
TH
HEATER COILS
TE = TOP ELEMENT
CE = CENTER ELEMENT (IF PROVIDED)
BE = BOTTOM ELEMENT
11
TH
TH
TH
PX-14 & PX-16 WIRING DIAGRAM & TABLES
L1
Brn
Blu
Grn/Yel
(Blk)
(Wht)
(Grn)
-Line CordFor NEMA plugs see tables
A4
er
L2 (N)
or:
Blu-H1
E3 Gry
Bottom Heating Coil
S2
S1
Bottom
Switch
Pilot Light
2
H3
Bottom
Switch
Top
Switch
1
A3
H1
Timer
Motor
Q1-Connector
Q3-Butt Connector
H5
H3
Q4-Twin Adapter Terminal
12
100/1
S2
Thermostat 1 2
NEMA Plug Configuration & Number
Europe Japan
USA Canada UK
Heating Coils Timer Motor Volts A/C Amp
/ Phase
Watts / Volts Volts / Hz
750/100
15
200/1
120/60
100/1
120/60
120/1
15
5-15P
750/200
7.5
220-240/1
250/60
200/1
250/60
208-240/1
9.7
6-15P
750/220
BS 1363A
CEE7-VII
900/100
125/60
900/100
125/60
900/200
250/60
900/220
250/60
900/220
250/60
5-20P
9
6-15P
8.1
Heating Coils Timer Motor
Watts / Volts Volts / Hz
6-15P
750/220
6-15P
H2
18
5-20P
8.1
nt
me
Ele
m
tto
Bo
NEMA Plug Configuration & Number
Europe Japan
USA Canada UK
6-15P
208-240/1
H1
5-15P
750/110
12.5
5-15P
en t
PX-16
5-15P
120/1
lem
pE
To Bottom Switch
PX-14
Volts A/C Amp
/ Phase
S1
Q5-Twin Adapter Terminal
H5
Brn-A3
eC
ord
C1
To Top Switch
Brn
H3
NOTE: All wires to be 14 AWG 600V 200°C.
Color as shown above.
To
T1
H1
E2
L in
H4
Q2-Connector
E3
Buz
z
Brn-T1
Q2-P1085A
GND
L1
A4
Q4
Brn-S2
A4
E3
Q5
er
Q1-P1085A
E2
Brn
H5
Brn-S1
Top Heating Coil
Blu-H2
Blu-H4
Top
Switch
L2
Terminal Block
Timer
Motor
sta
t
P1069A E2 Gry
C1
Blu Q3-Butt Connector
Pilot
Light
L1
L2 (N)
A1 H1 H2 C1
Buz
z
H1
T he
rm
o
A1
Blu
Gnd
Terminal
Block
T1 A3
A1 H4
250/60
220-240/1
6-15P
9.7
BS 1363A
CEE7-VII
PARTS LISTS & EXPLODED VIEWS
Electric Counter Top Oven (New Style)
PX-14/16
PX-14 Beginning: Serial #4633, 12/09/99 (120V) or Serial #6547, 11/22/99 (208/240V)
PX-16 Beginning: Serial #959, 11/11/99 (120V) or Serial #1783, 12/01/99 (208/240V)
18 17
8
9
30 29 28 27 26 25
10 11 13
6
16
7
4
19
21
MINUTES
0
1
5
2
15
3
14
4
13
5
12
6
11
10
8
9
7
650
300
600
550
350
500
20
1 2
23 22
24
13 12
3
Item
Part #
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
D5023X
D5123X
S1153X
M1335X
P1003X
D5027U
D5127X
U1308A
U1309A
M1383A
M1384A
M1119X
S1311X
M1037X
S1038X
P1127X
D5038U
D5138U
Crumb Pan Assy w/Knob (PX-14)
Crumb Pan Assy w/Knob (PX-16)
Knob (Crumb Pan)
Audio Alarm
Terminal Block, 3 Pole
Control Panel Assy, Front (PX-14)
Control Panel Assy, Front (PX-16)
Control Panel Overlay, 60hz
Control Panel Overlay, 50hz
Timer, Electro-Mechanical, 15 Minutes, 120V
Timer, Electro-Mechanical, 15 Minutes, 220V
Thermostat, EGO, 300-650 deg (No Knob)
Knob (Thermostat & Timer)
Switch, Toggle, On/Off
Rubber Boot, On/Off Switch (Export)
Pilot Light, Amber
Rear Panel Assy, (PX-14)
Rear Panel Assy, (PX-16)
450
400
14
15
31 32 33 34 35
Item
Part #
Description
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
D5043U
S1392A
U1044X
D5037U
D5141U
S1031X
L1065X
L1148X
L1066X
L1149X
L1067X
L1156X
P6004X
P6383A
P6005X
P6006X
P6343X
Capillary Retainer Assy
Leg, each
Bakers Pride Nameplate, 8"
Peel Tray Assy w/Wire Rack & Hdl (PX-14)
Peel Tray Assy w/Wire Rack & Hdl (PX-16)
Handle, w/Nut & Bolt
Element, PX-14, 120V/750W (2)
Element, PX-16, 120V/900W (2)
Element, PX-14, 220V/750W (2)
Element, PX-16, 220V/900W (2)
Element, PX-14, 100V/750W (2) Japan
Element, PX-16, 200V/900W (2) Japan
Line Cord, 125V/15A
Line Cord, 125V/20A (Canada)
Line Cord, 250V/15A
Line Cord, CEE7-VII (Europe)
Line Cord w/Fuse, 13A/240V (U.K.)
Note: When ordering, ALWAYS specify Part #, Model #, Serial # and Voltage/Phase.
13
10/05
Electric Counter Top Oven (Old Style)
PX-14/16
PX-14 Before: Serial #4633, 12/09/99 (120V) or Serial #6547, 11/22/99 (208/240V)
PX-16 Before: Serial #959,
11/11/99 (120V) or Serial #1783, 12/01/99 (208/240V)
28 27 26 25 24 23
14
17
5
6
15 16
7
19
MINUTES
POINTER L’ETOILE,
PUIS REGLER LE TEMPS
0
0
15
1
1
2
15
21 20
2
3
1414
4
5
5
1212
6
11
11
10
10
9
9
8
7
8
4
3
*4
1313
6
7
TURN POINTER TO STAR, THEN SET FOR TIME
650
300
600
650
550
600
500
550
22
3
2
Item Part #
33 32 31 30 29
8
11 10 9
400
450400
13 12
18
1
300
350
350
450
500
Description
Item Part #
Description
1
D5023X
Crumb Pan Assy w/Knob (PX-14)
18
S1392A
Leg, each
2
D5123X
Crumb Pan Assy w/Knob (PX-16)
19
U1044X
Bakers Pride Nameplate, 8"
3
S1153X
Knob (Crumb Pan)
20
D5037U Peel Tray Assy w/Wire Rack (PX-14)
4
P1003X Terminal Block, 3 Pole
M1017X Timer, Mech, 15 Minutes (w/Knob/Plate)
21
D5141U Peel Tray Assy w/Wire Rack (PX-16)
5
22
S1031X
Handle, w/Nut & Bolt
6
S1052X
Knob, Timer
23
L1065X
Element, PX-14, 120V/750W (2)
7
S1025X
24
L1148X
Element, PX-16, 120V/900W (2)
8
M1120X
Plate, Timer
Thermostat, EGO, 650F deg (w/Knob)
25
L1066X
Element, PX-14, 220V/750W (2)
9
M1119X
Thermostat, EGO, 370C deg (w/Knob)
26
L1149X
10
S1155X
Knob, Thermostat (650F)
27
L1067X
Element, PX-16, 220V/900W (2)
Element, PX-14, 100V/750W (2) Japan
11
S1154X
Knob, Thermostat (370C)
28
L1156X
Element, PX-16, 200V/900W (2) Japan
12
M1037X Switch, Toggle, On/Off
29
P6004X
Line Cord, 125V/15A
13
S1038X
Rubber Boot, On/Off Switch (Export)
30
P6383A
Line Cord, 125V/20A (Canada)
14
P1127X
Pilot Light, Amber
31
P6005X
Line Cord, 250V/15A
15
D5038U Rear Panel Assy, (PX-14)
32
P6006X
Line Cord, CEE7-VII (Europe)
16
D5138U Rear Panel Assy, (PX-16)
33
P6343X
Line Cord w/Fuse, 13A/240V (U.K.)
17
D5043U Capillary Retainer Assy
Note: When ordering, ALWAYS specify Part #, Model #, Serial # and Voltage/Phase.
14
10/05
P18-S, BK18
Exterior/Door/Controls (Electro-Mechanical Timers)
29
30 31
32
13
26
36
14
15
16
17
18
19
8
25
37
23 24
35
MIN
28
0UT
MIN ES
UTES
300
650
12
0
UT
MIN ES
MIN
UTES
27
20 21 22
300
650
BAKERS
PRIDE
450
11
7
6
450
33 34
9
5
10
4
1
Item Part #
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Thermostat w/Knob, EGO (Standard) P-18
20
Thermostat w/Knob, EGO (High Heat) P-18 21
Thermostat w/Knob, KA-72, 550deg (BK-18) 22
Knob (Thermostat & Timer)
23
Timer, Elec-Mech, 60 Min, 120V (BK-18)
24
Timer, Elec-Mech, 60 Min, 220V (BK-18)
25
Timer, Elec-Mech, 15 Min, 120V (P-18)
26
Timer, Elec-Mech, 15 Min, 220V (P-18)
27
Control Panel
28
Circuit Breaker, 3 Amp
29
Audio Alarm (Discontinued)
30
Pilot Light, Amber
31
Terminal Block, 3 Pole
32
Line Cord 125V/15A (US) P & BK
33
Line Cord 250V/15A (US & Japan) P & BK
34
Line Cord 125V/20A (Canada)
35
Line Cord 250V/20A (Canada)
36
Line Cord, 230V/16A "C" Type (CE)
37
Line Cord, 230V/13A (UK)
N/S
M1098X
M1192X
M1110X
S1311X
M1381A
M1382A
M1383A
M1384A
D3157K
M1330A
M1335X
P1127X
P1089A
P6004X
P6005X
P6383X
P6009X
P6006X
P6343X
Item Part #
U1302X
U1307A
U1314A
U1297A
U1296A
S3019X
D3106X
S3001X
Q3021X
D3105K
S1316U
Q2041A
U1044X
S1014X
S1014Y
T3150A
D3162U
D3163U
D2069X
2
3
4
Description
Control Panel Overlay, EGO (P-18)
Control Panel Overlay, EGO Hi-Heat (P-18)
Control Panel Overlay (BK-18)
18 Minute Timer Overlay (50 cycles)
72 Minute Timer Overlay (50 cycles)
Bushing, Door
Door Assy w/Handle
Door Rod
Door Rod Spacer Kit (1 Kit per Door)
Outer Back
Door Handle Assy, 10"
Screw, 1/4-20 x 1/2 Rd Hd (Door Handle)
Bakers Pride Nameplate, 8"
4" Adjustable Leg (Set/4)
4" Adjustable Leg (each)
Intermediate Wire Rack (Option, BK18)
Wire Rack Support Assy, Left (Option)
Wire Rack Support Assy, Right (Option)
Stacking Kit
DECK ARRANGEMENT BY MODEL
3 1/4”
ZA
PIZ
3 1/4”
MIN
7 1/2”
0
UTES
MIN
KE
0
UTES
300
650
300
650
BA
BAKERS
PRIDE
BAKERS
PRIDE
450
450
P18S
BK18
Note: When ordering, ALWAYS specify Part #, Model #, Serial # and Voltage/Phase.
15
10/05
P18, BK18
16
15
Interior Components & Accessories
12
12
17
17
11
11
10
10
9
9
22
1
1
7
20
20
13
13
5
33 5
21
21
66
4
4
1
1
24
24
18
18
22
22
19
19
88
Item Part #
66
Description
Item
4
4
33
22
11
22
22
14
14
23
23
Part # Description
1
L1024X Element 115V/600W (US/Can) P-18, T,C & B
13
K1355X Baffle & Top Elem. Clips (5) BK
2
L1171X Element 115V/850W (US/Can) BK-18, T & B
14
P1042A Element Clip, 5/16", Center & Bottom
3
L1025X Element 208-240V/850W (US/Can/CE)P Top, BK T&B
15
T1120Y Ceramic Deck, 17 1/2 x 17 3/4 x 1/2 (each)
4
L1026X Element 208-240V/1KW (US/Can/CE) P-18 C & B
16
T1120X Ceramic Deck, 17 1/2 x 17 3/4 x 1/2 (set/2)
5
L1112X Element 200V/850W (Japan) P-18 Top
17
D3140Z Fresh Dough Baffle
6
L1113X Element 200V/1000W (Japan) P-18 C & B
18
D3152T Hearth Frame Assy
7
T5118X Steel Bake Deck (BK18 Only)
19
D4039K Deck Support
8
T5107Y Deck Scraper Brush
20
D3151K Element Support
9
P1019X Porcelain Spacer
21
D3131K Baffle Trim
10 Q3016A Washer, Star, #6
22
D3142K Deck Trim
11 Q1002A Nut, 6-32
23
D1134K Capillary Cover
12 S1061X 6-32 Terminal Cap
24
Q4021X Clip 3/16", Temp Sensor (2)
Note: When ordering, ALWAYS specify Part #, Model #, Serial # and Voltage/Phase.
16
10/05
P-22BL, P-22S, P-24S
NEW
STYLE
EXTERIOR/DOOR/CONTROLS
(Electro-Mechanical Timers)
THIS PARTS LIST PERTAINS TO THE FOLLOWING UNITS:
31
33
32
16
15
37
26 28
38
38
34
34
13
MIN
17
18
19
0
UT
MIN ES
300
650
MIN
BAKERS
PRIDE
450
24 23
450
5
6
7
Starting Serial #
All
#7131
#4160
#17288
25
39
35 36
12
Date
N/A
11/2/99
11/2/99
2/29/00
20 21 22
UTES
300
650
Voltage
All
208VAC
230VAC
All
27
14
14
0UT
MIN ES
UTES
10
Model #
P-22BL
P-22S
P-22S
P-24S
30
1 2 3 4 5
29
CONTROL PANEL WITH DIGITAL TIMER (OPTIONAL)
0
DIEHL micro
09 : 15
11
MIN.
-
20 21 22
300
650
SEC.
BAKERS
PRIDE
START-STOP
+
450
9
8
14
12
5
1 2 3 4
DECK ARRANGEMENT BY MODEL
2 3/4”
ZA
PIZ
2 3/4”
MIN
3 1/4”
MIN
300
BAKERS
PRIDE
450
P-22BL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
M1098X
M1192X
M1110X
M1342X
S1311X
M1384A
M1382A
M1275X
M1274X
D1157K
D1156K
M1330A
M1335X
P1127X
P1003X
P1004X
P6009X
P6385A
P6005X
U1302X
BA
7 1/2”
0
UTES
650
Item Part #
ZA
PIZ
3 1/4”
0
UTES
MIN
0
UTES
300
650
300
650
KE
BAKERS
PRIDE
BAKERS
PRIDE
450
450
P-22S
Description
Thermostat w/Knob, 650F (EGO)
Thermostat w/Knob, CE "430C" (High Heat)
Thermostat w/Knob, 550F, KA-72 (P-24S)
Thermostat Kit w/Knob, 250F (Special)
Knob (T-stat "F", 15 Min Timer: Rot-Elec)
Timer, Electro-Mech, 15 Min, (P-22S & P-22BL)
Timer, Electro-Mech, 60 Min (P-24S)
Timer, Electronic (Digital Readout) 60 cycle
Timer, Electronic (Digital Readout) 50 cycle
Control Panel (Rot/Elect Timer)
Control Panel (Electronic Timer)
Circuit Breaker, 3A
Audio Alarm (Discontinued)
Pilot Light, Amber
Terminal Block, 3 Pole, 1 Phase
Terminal Block, 4 Pole, 3 Phase
Line Cord, 250V/20A (USA & Canada)
Line Cord, 250V/30A (Can. 208V only)P22S/BL
Line Cord, 250V/15A (P-24S)
Control Panel Overlay, 22S & 22BL
P-24S
Item
Part #
Description
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
U1307A
U1314A
U1297A
U1296A
S3019X
D1106X
S1020X
D1143U
S3001X
Q3021X
D1105K
S1316U
Q2041A
U1044X
S1014X
S1014Y
T3139X
D1162U
D1163U
D2069X
Control Panel Overlay, Hi Heat, 22S & 22BL
Control Panel Overlay, P-24S
18 Minute Timer Overlay (50 cycle)
72 Minute Timer Overlay (50 cycle)
Door Bushing
Door Assy (No Window)
Window Assy (Door)
Door Assy (w/Window)
Door Rod
Door Rod Spacer Kit (1 Kit per Door)
Outer Back
Door Handle
Screws, 1/4-20 x 1/2 RH (Door Handle)
Bakers Pride Nameplate, 8"
4" Adjustable Leg (Set/4)
4" Adjustable Leg (each)
Intermediate Wire Rack (Option, P-24)
Wire Rack Support Assy, Left (Option)
Wire Rack Support Assy, Right (Option)
Stacking Kit
Note: When ordering, ALWAYS specify Part #, Model #, Serial # and Voltage/Phase.
17
10/05
P-22BL, P-22S, P-24S
NEW
STYLE
Interior Components & Accessories
10
16
13
9
8
7
12
5
3
1
19
Brick Lined
Models Only
6
4
2
22
17
20
18
23
15
5
14
3
1
11
20
21
24
Item Part #
Description
Item
Part # Description
1
2
L1072X
L1071X
Element, 208V/1075W, Top & Bottom
Element, 208V/1450W, Center
13
T1120Y
Deck, ea 17 3/4 x 17 1/2 x 1/2 (P-22BL Only)
14
T1121Y
Deck, 20 13/16 x 20 13/16 x 1/2 (each)
3
L1035X
Element, 230V/1075W, Top & Bottom
15
T1121X
Deck, 20 13/16 x 20 13/16 x 1/2 (set/2)
4
L1034X
Element, 230V/1450W, Center
16
D4040X
Fresh Dough Baffle
5
L1116X
Element, 200V/1075W, Top & Bottom (Japan)
17
D1152T
Hearth Frame Assy (No Element)
6
L1117X
Element, 200V/1450W, Center (Japan)
18
D4039K
Deck Support
7
P1019A
Porcelain Spacer
19
D4031X
Baffle Trim
8
9
Q3016A
Q1002A
Washer, Star, #6
Nut, 6-32
20
21
D1142K
D1134K
Hearth Trim
Capillary Cover
10
S1061X
Terminal Cap, 6-32
22
Q4021X
Clip, 3/16"
11
K1355X
Element Clip
23
T1222K
Steel Bake Deck (Optional)
12
D1158U
Ceramic Top Frame Assy (B/L Only)
24
T5107Y
Deck Scraper Brush
Note: When ordering, ALWAYS specify Part #, Model #, Serial # and Voltage/Phase.
18
10/05
P-44S, P-44BL, P-46S, P-48S EXTERIOR/DOOR/CONTROLS
35
NEW
STYLE
28
31
18 17
41
29
38
Model #
P-44BL
P-44S
P-44S
P-46S
P-48S
Voltage
All
208VAC
230VAC
All
All
Starting Serial #
All
#9503
#6475
#17309
#17161
Date
N/A
11/12/99
11/12/99
3/1/00
2/18/00
27
43
30
20 19
15
44
42
7
THIS PARTS LIST PERTAINS TO THE FOLLOWING UNITS:
36 37
32
(No Lights, Electro-Mechanical Timers)
MIN
16
0
UTES
300
650
6
0
650
16
26 25
5 4
3
2
33
21 22 23 24
UTES
300
450
5
MIN
34
450
5
44
6
7
39 40
1
11 12
CONTROL PANEL WITH LIGHTS & DIGITAL TIMERS (OPTIONAL)
9
8
15
15
16
16
DIEHL micro
0
0
DIEHL micro
09 : 15
MIN.
09 : 15
300
650
SEC.
650
300
MIN.
START-STOP
SEC.
START-STOP
-
+
-
450
13 14
Item
Part #
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
M1098X
M1192X
M1342X
M1110X
S1311X
M1384A
M1382A
M1275X
M1274X
M1259X
D2157K
D2101K
D2156K
D2102K
M1330A
P1127X
P1003X
P1004X
P6399A
P6385A
U1304A
U1310A
U1316A
U1318A
Thermostat w/Knob, 650F EGO, 44(2) 46(1)
Thermostat w/Knob, CE "430C" High Heat 44
Thermostat Kit w/Knob, 250F (Special)
Thermostat w/Knob, 550F KA72, 46 (1), 48 (2)
Knob (T-stat "F", 15 Min Timer: Rot-Elec)
Timer, Elec-Mech, 15 Min, 44(2) 46(1)
Timer, Elec-Mech, 60 Min, 46(1) 48(2)
Timer, Electronic (Digital Readout) 60 cycle
Timer, Electronic (Digital Readout) 50 cycle
Toggle Switch (Lights, On/Off)
Control Panel (Rot/Elect Timer-No Lights)
Control Panel (Rot/Elect Timer-w/Lights)
Control Panel (Electronic Timer-No Lights)
Control Panel (Electronic Timer-W/Lights)
Circuit Breaker, 3A
Pilot Light, Amber
Terminal Block, 3 Pole, 1 Phase
Terminal Block, 4 Pole, 3 Phase
Line Cord, 125/250V, 50A
Line Cord, 250V, 30A (P-46 & P-48)
Control Panel Overlay (44 & 44BL)
Control Panel Overlay, Hi Heat (44 & 44BL)
Control Panel Overlay (P-46)
Control Panel Overlay (P-48)
+
8
9
450
10
16
Item
Part #
Description
25
26
27
28
29
30
31
U1297A
U1296A
S3019X
D1106U
S1020X
D1143U
P1145X
P1129X
P1147X
P1020X
P1122X
S3001X
Q3021X
D2105K
S1316U
Q2041A
U1044X
S1014X
S1014Y
T3139A
D1162U
D1163U
M1335A
D2069X
18 Minute Timer Overlay (50 cycles)
72 Minute Timer Overlay (50 cycles)
Door Bushing
Door Assy (No Window)
Window Assy (Door)
Door Assy (w/Window)
Light Fixture (w/240V,15W Bulb)
Light Fixture (Old Style, 3” Diameter)
Light Bulb, 240V/15W
Light Bulb, (Old Style, 115V)
Light Bulb, (Old Style, 250V)
Door Rod
Door Rod Spacer Kit (1 Kit per Door)
Outer Back
Door Handle
Screws, 1/4-20 x 1/2 RH (Door Handle)
Bakers Pride Nameplate, 8"
4" Adjustable Leg (Set/4)
4" Adjustable Leg (each)
Intermediate Wire Rack (Option 46 & 48)
Wire Rack Support Assy, Left (Option)
Wire Rack Support Assy, Right (Option)
Audio Alarm (Discontinued)
Stacking Kit
32
33
34
35
36
37
38
39
40
41
42
43
44
45
Note: When ordering, ALWAYS specify Part #, Model #, Serial # and Voltage/Phase.
19
21 22 23 24
10/05
P-44S, P-44BL, P-46S, P-48S
NEW
STYLE
23
15
12
Interior Components & Accessories
16
13
10
9
8
7
5
1 3
19
Brick Lined
Models Only
4
6
2
14
22
17
20
24
5
18
3
1
11
20
21
DECK ARRANGEMENT BY MODEL
2 3/4”
2 3/4”
2 3/4”
0
UTES
0
300
650
450
650
3 1/4”
MIN
UTES
300
P-44BL
Item Part #
1
2
3
4
5
6
7
8
9
10
11
12
L1072X
L1071X
L1035X
L1034X
L1117X
L1116X
P1019A
Q3016A
Q1002A
S1061X
K1355X
D1158U
MIN
0
UTES
3 1/4”
ZA
PIZ
3 1/4”
450
3 1/4”
ZA
PIZ
3 1/4”
ZA
PIZ
2 3/4”
MIN
3 1/4”
ZA
PIZ
0
300
650
450
650
MIN
UTES
MIN
300
KE
7”
BA
0
300
650
450
P-44S
Description
BA
0
UTES
650
450
7”
BA
7”
KE
ZA
PIZ
MIN
UTES
MIN
0
UTES
450
P-46S
0
300
650
300
450
650
KE
MIN
UTES
300
450
P-48S
Item
Part #
Description
13
14
15
16
17
18
19
20
21
22
23
24
T1120Y
T1121Y
T1121X
D4040X
D1152T
D4039K
D4031K
D1142K
D1134K
Q4021X
T1222K
T5107Y
Deck, ea 17 3/4 x 17 1/2 x 1/2 (P-44BL Only)
Deck 20 13/16 x 20 13/16 x 1/2 (each)
Deck 20 13/16 x 20 13/16 x 1/2 (Set/2)
Fresh Dough Baffle
Hearth Frame Assy (No Element)
Deck Support
Baffle Trim
Hearth Trim
Capillary Cover
Clip, 3/16"
Steel Deck (Optional)
Deck Scraper Brush
Element, 208V/1075W, Top & Bottom
Element, 208V/1450W, Center
Element, 230V/1075W, Top & Bottom
Element, 230V/1450W, Center
Element, 200V/1075W, Top & Bottom (Japan)
Element, 200V/1450W, Center (Japan)
Porcelain Spacer
Washer, Star, #6
Nut, 6-32
Terminal Cap, 6-32
Element Clip
Ceramic Top Frame Assy (P-44BL Only)
Note: When ordering, ALWAYS specify Part #, Model #, Serial # and Voltage/Phase.
20
10/05
DP-2
EXTERIOR / DOOR / CONTROLS (ELECTRO-MECHANICAL TIMERS)
27
NEW
STYLE
26
32
8
15
7
23
7
MIN
14
0
UTES
18
0
300
650
650
450
19 20
UTES
300
14
3 2
15
MIN
24
450
8
3
4
25
3
2
1
17
16
THIS PARTS LIST PERTAINS TO THE FOLLOWING UNITS:
Model #
Starting Serial #
Date
DP-2
19062
5/25/00
30 31
1
3 4
33 34
28
29
11 12
14
CONTROL PANEL WITH DIGITAL TIMERS & INFINITE SWITCHES (OPTIONAL)
10 9
LOWER CHAMBER
DIEHL micro
0
09 : 15
MIN.
2
3
SEC.
-
+
. 5
7
6
2
3
0
650
650
300
5
22
5
6
2
3
7
15
Description
1
2
3
4
5
6
7
8
9
M1098X
M1192X
S1311X
M1384A
M1275X
M1274X
M1335X
M1259X
M1367A
M1368A
S1205X
D2101U
D4046U
D4045U
M1330A
P1127X
P1003X
P1004X
Thermostat w/Knob, EGO
T-stat w/Knob, CE "430C" (High Heat)
Knob (Thermostat & Timer)
Timer, Elec-Mech, 15 Min (220V)
Timer, Electronic, 60Hz (Domestic)
Timer, Electronic, 50Hz (CE)
Audio Alarm (Discontinued)
Toggle Switch (Lights, On/Off)
Infinite Switch, 208V
Infinite Switch, 240V
Knob, Infinite Switch
Control Panel (Rot-ElecTimer)
Control Panel (Rot-ElecTimer/Infinite Sw.)
Control Panel (ElectronicTimer/Infinite Sw.)
Circuit Breaker, 3A
Pilot Light, Amber
Terminal Block, 3 Pole (Domestic)
Terminal Block, 4 Pole (CE)
2
3
9
8
09 : 15
MIN.
7
4
5
SEC.
START-STOP
6
-
+
UPPER CHAMBER
450
21
14
8
Part #
6
10
1
9
8
5
DIEHL micro
0
10
4
Item
10
11
12
13
14
15
16
17
300
7
4
450
6
0
1
9
8
9 10
15
8
10
1
9
8
4
START-STOP
0
0
10
1
14
20 19
13
5
Item
Part #
Description
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
N/S
P6385A
U1304A
U1310A
U1289A
U1288A
U1297A
S3019X
D4006X
P1145X
P1147X
S3001X
Q3021X
S1316U
Q2041A
U1044X
S1014Y
S1014X
D2069X
Line Cord, 250V/30A
Control Panel Overlay
Control Panel Overlay (High-Heat)
Overlay, Top Infinite Controls
Overlay, Bottom Infinite Controls
18 Minute Timer Overlay (50 cycles)
Door Bushing
Door Assembly
Light Fixture (w/240V, 15W Bulb)
Light Bulb, 240V/15W
Door Rod
Door Rod Spacer Kit (1 Kit per Door)
Door Handle
Screws, 1/4-20 x 1/2 RH (Door Handle)
Bakers Pride Nameplate, 8"
4" Adjustable Leg (each)
4" Adjustable Leg (Set/4)
Stacking Kit
Note: When ordering, ALWAYS specify Part #, Model #, Serial # and Voltage/Phase.
21
6
10/05
DP-2
Interior Components
NEW
STYLE
10
14
6
9
8
7
1
4
3
5
2
17
19
15
15
18
18
12
13
Item
Part #
Description
1
2
3
4
5
6
7
8
9
10
L1072X
L1071X
L1034X
L1035X
L1117X
L1116X
P1019X
Q3016A
Q1002A
S1061X
Element, 208V/1075W, Top
Element, 208V/1450W, Bottom
Element, 230V/1075W, Top
Element, 230V/1450W, Bottom
Element, 200V/1075W, Top (Japan)
Element, 200V/1450W, Bottom (Japan)
Porcelain Spacer
Washer, Star, #6
Nut, 6-32
Terminal Cap, 6-32
11
20
16
Item
Part #
Description
11
12
13
14
15
16
17
18
19
20
K1355X
T1121Y
T1121X
D4040X
D1152T
D4039K
D4031K
D4034K
Q4021X
D1142K
Element Clip
Hearth Deck 20 13/16 x 20 13/16 x 1/2 (each)
Hearth Deck 20 13/16 x 20 13/16 x 1/2 (Set/2)
Fresh Dough Baffle
Hearth Frame Assy
Deck Support
Baffle Trim
Capillary Cover
Clip, 3/16" (Capillary)
Deck Trim
Note: When ordering, ALWAYS specify Part #, Model #, Serial # and Voltage/Phase.
22
10/05
BAKERS PRIDE LIMITED WARRANTY
30 Pine Street New Rochelle, New York 10801
914 / 576 - 0200 ♦ US & Canada: 1 - 800 - 431 - 2745 ♦ fax 914 / 576 - 0605
WHAT IS COVERED
This warranty covers defects in material and workmanship under normal use, and applies only to the original purchaser
providing that:
♦ The equipment has not been accidentally or intentionally damaged, altered or misused;
♦ The equipment is properly installed, adjusted, operated and maintained in accordance with National and local codes. and
in accordance with the installation instruction provided with the product;
♦ The serial number rating plate affixed to the equipment has not been defaced or removed.
WHO IS COVERED
This warranty is extended to the original purchaser and applies only to equipment purchased for use in the U.S.A.
COVERAGE PERIOD
Full size gas and electric deck ovens: Two (2) year limited parts and labor: Cyclone Convection Ovens: BCO Models: One (1)
Year limited parts and labor; GDCO Models: Two (2) Year limited parts and labor; CO II Models: Two (2) Year limited parts
and labor; (5) Year limited door warranty.
All Other Products: One (1) Year limited parts and labor.
Warranty period begins the date of dealer invoice to customer or ninety (90) days after shipment date from BAKERS PRIDE whichever comes first.
WARRANTY
COVERAGE
This warranty covers on-site labor, parts and reasonable travel time and travel expenses of the authorized service
representative up to (100) miles. round trip, and (2) hours travel time. The purchaser. however, shall be responsible for all
expenses related to travel, including time. mileage and shipping expenses on smaller counter models that may be carried into
a Factory Authorized Service Center, including the following models: PX-14. PX-16, PI8, and BK-I8.
EXCEPTIONS
All removable parts in BAKERS PRIDE Char-broilers, including but not limited to: Burners, Grates. Radiants, Stones and
Valves, are covered for a period of SIX MONTHS.
All Ceramic Baking Decks are covered for a period of THREE MONTHS. The installation of these replacement decks is the
responsibility of the purchaser.
The extended Cyclone door warranty years 3 through 5 is a parts only warranty and does not include labor, travel, milage or
any other charges.
EXCLUSIONS
♦ Failures caused by erratic voltages or gas supplies,
♦ Unauthorized repair by anyone other than a BAKERS PRIDE
Factory Authorized Service Center,
♦ Damage in shipment,
♦ Alteration, misuse or improper installation,
♦ Thermostats and safety valves with broken capillary tubes.
♦ Accessories - spatulas, forks. steak turners, grate lifters,
oven brushes, scrapers, peels. etc.,
♦ Freight - other than normal UPS charges,
♦ Ordinary wear and tear.
♦ Negligence or acts of God,
♦ Thermostat calibrations after (30) days from equipment
installation date,
♦ Air and Gas adjustments,
♦ Light bulbs,
♦ Glass doors and door adjustments.
♦ Fuses,
♦ Char-broiler work decks and cutting boards,
♦ Tightening of conveyor chains,
♦ Adjustments to burner flames and cleaning of pilot burners,
♦ Tightening of screws or fasteners.
INSTALLATION
Leveling and installation of decks. as well as proper installation and check out of all new equipment - per appropriate
installation and use materials - is the responsibility of the dealer or installer, not the manufacturer.
REPLACEMENT
PARTS
BAKERS PRIDE genuine Factory OEM parts receive a (90) day materials warranty effective from the date of installation by a
BAKERS PRIDE Factory Authorized Service Center.
This Warranty is in lieu of all other warranties, expressed or implied, and all other obligations or liabilities on the manufacturers part. BAKERS PRIDE
shall in no event be liable for any special, indirect or consequential damages, or in any event for damages in excess of the purchase price of the unit. The
repair or replacement of proven defective parts shall constitute a fulfillment of all obligations under the terms of this warranty.
Form #U4177A 1/07
23
BAKERS PRIDE OVEN CO., INC.
30 Pine Street
New Rochelle, NY 10801
(914) 576-0200 Phone
(914) 576-0605 Fax
(800) 431-2745 US & Canada
www.bakerspride.com Web Address
24