Download Morphy Richards 48320 Setup guide

48319 a4_45xxx rev1 26/01/2010 09:21 Page 2
QUICK SETUP GUIDE
Control panel and LCD display
‰
Â
‰ Programme number
Ó
 Cycle time
Ì
Ë Loaf sizes
È Crust settings
Ê
Á
Ì Go back/cancel/pause
Ô
Ó Increase/light on

Ô Decrease
 Accept/start
Ë
È
Í
Î
Ï
Only the relevant controls are shown here. For complete list of features see page 5
When you plug the breadmaker in, the details of a default programme automatically show on the
screen. The default programme is to make a basic white or brown 2lb sized loaf on programme 1,
with the 3rd medium crust setting which will take 3 hours. If this is the programme you want to use,
once you have put your ingredients in (in the correct order, see pages 16-17) press and hold the
‘Accept/Start’ button  for approximately 3 seconds and the breadmaker will start baking your
loaf. If you want to choose another programme, follow the steps below.
To select the programme:
1
Once the breadmaker is plugged in, the default programme as detailed
above will show on the screen. To choose an alternative programme, use
the ‘Increase’ Ó and ‘Decrease’ Ô buttons until the programme number
you want appears in the top left corner of the screen ‰ – see page 6-7
for programme descriptions. The cycle time of the selected programme
will automatically appear on the screen Â.
2
Once you have chosen the programme you wish to use, press the
‘Accept/Start’ button . The ‘Loaf size’ icon Ë will illuminate. This will
automatically be set to the 2lb loaf setting. To choose a different size loaf,
use the ‘Increase’ Ó and ‘Decrease’ Ô buttons. Only the loaf sizes
available for the programme selected will appear.
To select the loaf size:
1lb loaf
(selected programmes)
1.5lb loaf
2lb loaf
To select the crust setting:
3
When you have chosen your loaf size, press the ‘Accept/Start’ button .
The ‘Crust Setting’ icon È will then illuminate. This will automatically be
set to setting 3 medium. To choose a darker or lighter crust, use the
‘Increase’ Ó and ‘Decrease’ Ô buttons. To bake the loaf press and hold
the ‘Accept/Start’ button  for approximately 3 seconds, the baking
process will begin and the countdown timer  will count down to zero.
Please note that during the baking process, condensation will form on
the inside of the fruit & Nut dispenser. This is totally normal and does not
effect the quality of the bread.
4
2
Very Light
Light
Medium
Dark
Very Dark
The end of the Baking Process
At the end of the baking process when the countdown on screen
reaches zero, the breadmaker beeps to indicate the baking process has
finished. The breadmaker automatically goes into the Keep warm
programme. This can be stopped at any time by pressing the Go
back/cancel/pause Ì.
UK Helpline 0844 871 0944
Replacement Parts 0844 873 0710
Ireland Helpline 1800 409 119