Download MULTIQUIP 13HP Specifications

MQ STREET PRO 1 SAW — RULES FOR SAFE OPERATION
Saw Transportation Safety
Machine Operation And Safety Decals
■ Use appropriate lifting equipment to ensure the safe
movement of the saw.
The SP 1 is equipped with a number of operation and safety
decals. Should any of these decals become unreadable,
replacements can be obtained from your dealer.
■ DO NOT use the handle bars and/or front pointer as lifting
points.
■ NEVER attempt to tow the untrailered saw behind a vehicle.
■ Do not use on slopes or on extremely unlevel surfaces. An
engine tipped to extreme angles may cause oil to gravitate
into the cylinder head making the engine start difficult.
WARNING
TO GUARD AGAINST PERSONAL INJURY,
OBSERVE THE FOLLOWING:
DO NOT REMOVE THIS TAG!
WARNING
WARNING
TO GUARD AGAINST PERSONAL INJURY,
OBSERVE THE FOLLOWING:
TO PREVENT SERIOUS INJURY
DO NOT OPERATE SAW
WITHOUT PROPER TRAINING
& FULL UNDERSTANDING
OF THE OWNERS MANUAL
DO NOT REMOVE THIS TAG!
WHEN OPERATING THIS MACHINE
P/N 25215-001
(ELECTRIC MODEL ONLY)
KEEP ALL
GUARDS IN
PLACE
ALWAYS WEAR SAFETY APPROVED
HEARING
PROTECTION
EYE OR FACE
PROTECTION
■ NEVER transport the saw with the blade mounted.
HEAD
PROTECTION
RESPIRATOR
SMI MASONRY AND CONCRETE
SAW MANUFACTURING INSTITUTE
P/N 11247 (ISO Black)
P/N 36099 (ISO Blue)
EMERGENCIES
P/N 22122-001
■ ALWAYS know the location
of the nearest fire
extinguisher.
WARNING!
KEEP FEET
CLEAR
P/N 25782
P/N 25250-001
WARNING!
■ ALWAYS know the location of the
nearest first aid kit.
KEEP HANDS
CLEAR
P/N 25783
P/N 25249-001
Engine exhaust and some of
its constituents, and some dust created
by power sanding, sawing, grinding,
drillingandotherconstructionactivities
contains chemicals known to the State
of California to cause cancer, birth
defects and other reproductive harm.
Some examples of these chemicals are:
AT
ROT ION
P
■ In emergencies always know the location of the
nearest phone or keep a phone on the job site.
Also know the phone numbers of the nearest
ambulance, doctor, and fire department. This
information will be invaluable in the case of an
emergency.
P/N 25491
CO
Leadfromlead-basedpaints.
Crystallinesilicafrombricks.
Cementandothermasonryproducts.
Arsenicandchromiumfromchemically
treatedlumber.
AT
ROT ION
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to
these chemicals: ALWAYS work in a
well ventilated area, and work with
approved safety equipment, such as
dust masks that are specially designed
to filter out microscopic particles.
P/N 20525
D
OW ER
AT E D
P/N 13118
P/N 25678
CAUTION
When Larger Blade and Guard
is Installed, Belt Drive MUST
Be Changed to Proper Size.
See Owners Manual.
MODEL
SERIAL NO.
CONTACT
SERVICE
DEPARTMENT
FAILURE TO COMPLY WITH THE C C AH
JADV EEE AV EEA OIEJGGVCBVVZ
S.M.I. MASONRY AND CONCRETE
SAW MANUFACTURER’S INSTITUTE
P/N 23330-001
P/N 11246
(Sheet-Intl. Stds)
Figure 1. SP 1 Decals
PAGE 10 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)