Download Chloride Power Protection Active 1500 Technical data

CHLORIDE
POWER PROTECTION
•
REMAINING AUTONOMY
This represents the remaining time to the battery cut off.
Example: If LEARNT AUTONOMY is 15 minutes, AUTHORIZED AUTONOMY 10 minutes, after 3
minutes of discharging, the value of REMAINING AUTONOMY will be 10 minus 3 = 7 minutes.
5.0 MONITORING
AND CONTROL
5.1 Introduction
By employing microprocessor technology, the UPS shall provide an advanced and easy to use diagnostic
system.
5.2 Control panel
1
3
4
8
7
9
10
2
6
1&2
3
4
5
6
7
8
9
10
-
5
Switch off buttons: both must be pushed simultaneously to prevent accidental shutdown.
Start-up button.
Alarm reset button: silences the audible alarm when pressed.
Forced by-pass button: used to activate forced by-pass.
By-pass LED: lit when unit is in by-pass mode.
Battery LED: lit when batteries are charging.
Mains LED: lit when the mains power is within limits.
Output LED: lit when output voltage is sensed.
Alarm LED: lit when a fault is detected.
MKA4ST0UKPLAN5-7/Power Lan/ed.5/09-2003/UK
7