Download Digi DC-200 Operating instructions

STEALTH DIGI-TIG200PD
1
11
9
6
10
25
12
6
19
7
4
8
3
2
3
5
13
Memory chanel LED 2. Data Display meter 3. Parameter Select function 4.indicating light of power
1. Memory channel LED
S -- unit of up & downslope time & pre& post flow time
11.TIG selector: DC TIG / AC TIG
2. ofData
% -- unit
AC Display
balance meter
&peak time on
12.2T / 4T selector
Hz-- unit
pulse freq.&AC
3. of
Parameter
Select freq.
function
13.Data Display adjustment knob
indicating light of Parameter Select function （ Pre-flow /Start current/Up slope/Welding Amps （ Pulse peak
4. Power light indicator
15.Output Positve (welding holder)
mps）/peak time on/ pulse freq./base Amps/down slope/end current/post flow/AC freq./ AC balance/)
5. S = Unit of up and downslope time and
AC slector
16.Output Negative (ground clamp)
pre and post flow time
C WAVE
advanced
square/soft
square
/ sineout
square
FORM:
% = unit
of AC balance
and square/triangular
peak time on
17.Argon
Hz = unit of pulse frequency and AC
warning indicating light
frequency
18.Argon arc control (or remote control)
MMA slector
6. Parameter Select function: Pre-Flow, Start
Current, Up Slope, Welding Amps, Pulse
Peak
Amps, Peak Time on, Pulse
0.TIG PULSE
slector
Frequency, Base Amps, Down Slope,
1.TIG slector
End Current, Post Flow, AC frequency,
AC balance
C TIG/AC
TIG
C-/DC+
2. 2 T/ 7.
4 T AC
slector
selector
19.Amp Adjustment Selector (remote control):
Panel, Pedal, Torch
20.Power switch
21.Argon inlet
22.Power supply
3. Data Display Adjustment Knob 15. output"+"（Welding holder） 16. output"-" （ Ground clamp）
8. Warning indicating light
7.argon out 18.argon arc control (or remote control)
23.Safety earthing column
MMA selector:
DC– / DC+
9.Amp 9.
Adjustment
slector (remote
control)
24.Cooling fan
anel/ pedal
/finger
torchselector
10.TIG
PULSE
25.HF/Lift TIG selector
0. power switch
1.argon inlet
22.power supply
23.safety earthing column
24.fan