Download Agilent Technologies E6701A User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
Noc (RF2)
Displays the resultant value of AWGN power level relative to a single resource element (as described in
3GPP 36.521-1) for antenna port 2. This is the power level of AWGN relative to a single resource element,
given the SNR RF2 and cell power setting.
Most of the RF conformance tests are expected to use (AWGN) = −98 [dBm/15kHz]
where the bandwidth is set equal to the serving cell channel bandwidth profile.
Mode
BSE, SA
Value
= Noise Amplitude (RF2) – 10 log10(Number Resource Elements in
Bandwidth)
Dependencies and/or Couplings
Read-only key
Initial S/W Revision
6.3
Key Path
Amp > AWGN
Noise Amplitude (RF1)
Displays the AWGN power level of antenna port 1 as an integrated power level, which is the same terms
used to set or display the total Cell power RF1 amplitude.
Mode
BSE. SA
Value
= RF1 Amplitude – Signal to Noise Ratio (RF1)
Preset
−57
Dependencies and/or Couplings
Read-only key.
Initial S/W Revision
6.3
Key Path
Amp > AWGN
Noise Amplitude (RF2)
Displays the AWGN power level of antenna port 2 as an integrated power level, which is the same terms
used to set or display the total Cell power RF2 amplitude.
Mode
BSE, SA
Value
= RF1 Amplitude – Signal to Noise Ratio (RF2)
Preset
−57
Dependencies and/or Couplings
Read-only key
Initial S/W Revision
6.3
Key Path
Amp > AWGN
11