1
Download Chevrolet 2006 Aveo Specifications
Transcript
Taillamps, Turn Signal, Stoplamps and Back-up Lamps To replace a taillamp, stoplamp or back-up bulb, do the following: 1. Open the trunk or liftgate. See Trunk (Sedan) on page 2-9 or Liftgate (Hatchback) on page 2-11 for more information. 4. Remove the bulb from the lamp housing by pulling the bulb straight out of the socket. 5. Install the new bulb into the bulb socket by pushing it in and rotating the bulb socket clockwise. 6. Push the side turn signal lamp assembly back into its original position. 2. Remove the two screws and the lamp assembly. 3. Remove the bulb socket by turning it counterclockwise. 4. Remove the bulb from the socket by pressing the bulb and turning it counterclockwise. 5-43
