Download Miele DA 3190 EXT Technical data
Transcript
Installation Attaching the lightshield ^ Secure the front of the appliance to the floor of the housing unit from below using 4 screws (6 screws for 90 cm wide cooker hood). To avoid damaging the deflector plate when it is pulled out, care should be taken to screw the fixing screws in straight, and to ensure that the screwheads are countersunk. ^ Attach the lightshield (if using). A DML 300 installation kit, available as an optional accessory, is required for this. This installation kit is supplied with the DFB lightshield. Follow the installation instructions supplied. Weight of a lightshield matching existing furniture The lightshield must not exceed 1300 g in weight. This applies to lightshields with a depth of up to 30 mm. For larger or heavier lightshields, the weight must be reduced by e.g. machining it away at the back. ^ Secure the spacer strip to the back of the appliance from behind using 4 plastic rivets as shown. 28