Download Anritsu MG3700A MG3700A Specifications
Transcript
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com W-CDMA IQproducer Standard accessory W-CDMA IQproducer is GUI-based, PC application software for generating waveform patterns used in W-CDMA Rx sensitivity measurement. Once created, the waveform pattern file is downloaded to the MG3700A hard drive. Using the MG3700A, Vector Signal Generator functionality, the files are loaded, selected, and output as a modulated RF signal. By changing the Scrambling Code Number and Channelization Code Number, waveform patterns can be created that support the evaluation of W-CDMA terminals. If complete control of all W-CDMA parameters is required, the MX370101A HSDPA/HSUPA IQproducer software (sold separately) can be used. For details, see the MX370101A HSDPA/HSUPA IQproducer section of this document. ● Uplink Settings Uplink sets parameters including Scrambling code, UL-DPCCH/ UL-DPDCH power, DPCH_PhyCH TFCI and Timing Offset, and DPCH_TrCH Data to create the waveform pattern. (For details, see the Uplink Parameter Setting Range table described later.) ● Downlink Settings Downlink sets parameters including Scrambling code, CPICH/P-CCPCH/PICH/DPCH power, Channelization code, DPCH_PhyCH TFCI and Timing Offset, and DPCH_TrCH Data to create the waveform pattern. (For details, see the Downlink Parameter Setting Range table described later.) Additionally, the Downlink Easy Setup function supports the Reference Measurement Channel (RMC) items specified by 3GPP TS25.101 and TS25.104. Parameter setting is easy just by selecting the items to create the waveform pattern. Easy Setup Items include: RMC: RMC RMC RMC RMC RMC 12.2 kbps 12.2 kbps 64 kbps 144 kbps 384 kbps (RX test) (Performance test) (Performance test) (Performance test) (Performance test) Downlink Main screen 6 Product Brochure l MX3701xxA Uplink Main screen