Download Pro-Form 14.0 CE User`s manual

12. Orient the Rear Upright Cover (25) as shown.
12
Attach the Rear Upright Cover (25) to the
Upright (5) with four M4 x 19mm Screws (156).
156
25
13. Untie and discard the wire tie attached to the
Wire Harness (60).
13
While a second person holds the Console (33)
near the Upright (5), connect the wires on the
Console to the Wire Harness (60) and to the
Pulse Wires (105).
5
Avoid pinching
the wires
33
105
Insert the excess wire downward into the
Upright (5) or upward into the Console (33).
Tip: Avoid pinching the wires. Attach the
Console (33) to the Upright (5) with four M4 x
19mm Screws (156).
5
60
156
156
12