Download Comm Partners connect Polycom 650 User guide

Using the Basic Features of Your SoundPoint IP 650 SIP Phone
Note
b
If you select No Answer, enter a number to forward all unanswered
incoming calls to and how many rings to wait before forwarding (one
ring is approximately six seconds). A value of 2 is recommended.
c
If you select Busy, enter a number to forward all future incoming calls
to when you are already in another call.
You can also enter the SIP URL or IP address. For more information on using a SIP
URL or IP address, refer to To place a call using the handset: on page 3-3
5. Select the Enable soft key to confirm call forwarding.
Select the Exit soft key to cancel any changes.
The idle display returns with a moving arrow as the line label to confirm
call forwarding is enabled.
To disable call forwarding:
1. Do one of the following steps:
— Press
and select Features > Forward...
— Press the Forward soft key from the idle display.
2. (Optional) If multiple lines are configured on your phone, select the line
to forward from the list using
and
.
3 - 21