Download Escient EWP-2000 V2 User manual

Chapter 17: Learning new Infrared Commands
RC-II will display a short instruction
message on how to teach new IR codes.
If your original remote control uses a
toggle code IR format set the “Learn
toggle codes” option.
If you have learned from a remote control
which uses the IR toggle code format
without set this option, only every second
sent command will be recognized from the
controlled device.
Click on “OK” to start the quick learn
mode.
Click on “OK” to start the IR teaching process
Activate the fullscreen mode if the buttons
you want to teach are not visible.
Optionally: Activate the fullscreen mode
Click on the button you want to teach a
new IR command.
Click on the button you want to teach a IR code
RemoteControl II, v3.00, User Manual, © 2010 WinCESoft
Page 93