Download MOOSE ZXSSD System information

TESTING YOUR SYSTEM
RF Signal Strength (ZX400/ZX410 only)
If your system includes wireless sensors, then you can test the strength
of signals from these sensors by performing an RF Signal Strength test.
The strength of a signal can be affected by a low battery condition on
the sensor or changes in the environment due furniture or appliances.
To test the signal strength of selected RF Zones:
8
1.
Press
. The Control Station will display:
2.
Enter passcode:
.
The Control Station will display:
6
3.
Press
. The Control Station will display:
4.
Enter a number between 13 and 28 to select a wireless sensor to
test. See Protection Zones for a list of zone numbers and descriptions.
Press ENTER . The Control Station will briefly display one of the
following:
5.
The selected zone is
not RF or is missing
Call your Installation
Representative
Acceptable
Strong
Repeat step 4 or press CLEAR to exit.
29