Download PRESONUS AudioBox Stereo Technical information

High Pass Filter Freq
Software: Virtual StudioLive and Studio One Artist
4
Virtual Studio Live 4.1
Overview
Owner’s Manual
Adjust the High Pass Filter’s Cutoff Frequency.
The High Pass filter’s cutoff frequency can be set from 18 Hz to 1.3 kHz.
Hookup
Remember that all frequencies below a high-pass filter’s cutoff
frequency are attenuated. See Section 5.3.1 for more details.
The slope of the High Pass filter is -6 dB/octave.
Software: Virtual StudioLive
SL Remote,
and Studio
One Artist
and Studio One Artist
Gate On/Off Button
Connecting
to a
Computer
The High Pass Filter is accessible from the Main
VSL Page as well as the Gate Zoom.
Turns the Gate On and Off for the Selected Channel or Bus.
This button engages and disengages the gate for the selected channel.
It will illuminate to indicate that the gate has been enabled.
Sets the Threshold of the Gate for the Selected Channel or Bus.
Technical
Information
Gate Threshold
Tutorials
The gate is available for all input and output buses.
The Gate Threshold determines the level at which the gate will
open. Essentially, all signals above the threshold setting are passed
through unaffected. You can set the threshold from 0 to -84 dB.
Compressor On/Off
Troubleshooting
and Warranty
The Gate can be controlled either via the
Threshold knob or from the Gate Graph.
Turns the Compressor On and Off for the Selected Channel or Bus.
This button engages or disengages the compressor for
the selected channel or output bus. It will illuminate to
indicate that the compressor has been enabled.
The compressor is available for all input and output buses.
Auto Mode Button
Enables Automatic Response Mode.
When Auto mode is active, the Attack and Release controls become
inoperative, and a preprogrammed attack and release curve is used. In
this mode, the attack is set to 10 ms, and the release is set to 150 ms.
All other compressor parameters can still be adjusted manually.
23