1
Download Mazda 3 2007 Specifications
Transcript
Mazda3_8V66-EA-06F_Edition2 Page320 Friday, May 26 2006 10:56 AM Black plate (320,1) Maintenance and Care Owner Maintenance Brake lights/Taillights (5 Door) 3. Disconnect the bulb from the socket. With LED bulb Due to the complexity and difficulty of the procedure, the LED bulbs should be replaced by an Authorized Mazda Dealer. NOTE LED bulb replacement is not possible. The rear combination component must be replaced. With Non-LED bulb 1. Remove the cover. Left side 4. Install the new bulb in the reverse order of removal. NOTE To replace the bulb, contact an Authorized Mazda Dealer. Rear turn signal lights (4 Door) 1. Pull the center of each plastic retainer and remove the retainers and the trunk end trim. Right side Removal Installation 2. Turn the socket and bulb assembly counterclockwise and remove it. 8-46 Form No.8V66-EA-06F
