Download Deltec Cozmo User manual

Help
Alarms and alert—continued
Message in display
!
Cartridge
very low
Basal is delivering
No bolus allowed
or bolus suspended
OK
!
Cartridge
Very Low
Reconnect is
allowed but no
reconnect bolus can
be delivered
<Cancel
!
Next>
Cartridge
Volume Low
Change cartridge
soon
OK
!
Check blood
glucose
Disconnecting.
Insert strip now or
Press OK and
Manually enter BG.
<Home
OK>
!
Check blood
glucose
Reconnected.
Insert strip now or
Press OK and
manually enter BG.
OK
Q
Check blood
glucose
It has been x:xx
hours since your last
bolus or cartridge
change
OK
Q
Check blood
glucose
Your last blood
glucose was high
OK
174
What it means / Alarm
How to make it stop
The cartridge is nearly empty.
Basal delivery continues, but
a bolus cannot be delivered.
Continuous alarm.
Press OK. There is enough insulin to continue
delivering the basal for a short time, but not
enough to start a bolus, or complete a bolus
that is in process (the bolus will be completed
when a new cartridge is loaded). You must begin
preparation to load a new cartridge.
The cartridge volume is very
low, so while you can begin the
Reconnect process you will not be
able to deliver a Reconnect bolus.
Single alarm.
Press Cancel to return to the Reconnect confirm
screen, or press Next.
The amount of insulin left in the
cartridge is low. Alert repeats at
intervals until Cartridge Very Low
alarm occurs. Attention alarm.
Press OK. Replace the cartridge as soon as
practical.
You are using the Disconnect
feature without Correction
Bolus being enabled, and the
pump is reminding you to
check your blood glucose before
disconnecting. Single alarm.
Press OK to go to the Disconnect Bolus Time
editing screen, or press Home to return to the
home screen.
You had previously used the
Disconnect feature and are
reconnecting without Correction
Bolus being enabled. The pump is
reminding you to test your blood
glucose after reconnecting. Single
alarm.
Press OK. Perform a blood glucose test.
It is time to test your blood glucose
level to make sure it is within your
target range. Attention alarm.
Press OK. Perform blood glucose testing. If it
is within your target range, do nothing. If your
blood glucose level is outside your target range,
treat it accordingly.
It is time to recheck your blood
glucose after a high test result.
Attention alarm.
You are using the optional High Blood Glucose
alert, and your last blood glucose test showed
a high result. Press OK and perform another
blood glucose test. Treat blood glucose highs as
indicated on page 28.