Download Rose electronics VSP-2DVI Specifications

shall be as per manufacturer specifications with flip box and Vertibrae. Table shall be assembled at site . The Products should be tested as per
BIFMA standards. The Product should have ISO-9001:2000 and ISO 14001-2004 certifications. The boards used should meet international
standards of quality and safety, as per EN 312, type P II, E2 and Indian standards IS 3087, grade II. Should meet stringent norms of bending
strength, screw-withdrawal strength and modulus of elasticity .
G. INTERVIEW,GROUP
DISCUSSION( 2700Wx900Dx750mmH)
Proving and fixing of Meeting table of size 2700mmX 900mmX750mm should have work top 25mm thick made of prelam particle board
with Leg should be 18 mm thick both side Full Round Post formed. and 18mmthick Modesty panel should be 600 mm high connecting both
legs .The prelam particle board used should meet international standards of quality and safety, as per EN 312, type P II, E2 and Indian
standards IS 3087, grade II.Should meet stringent norms of bending strength, screw-withdrawal strength and modulus of elasticity
H. INTERVIEW,GROUP DISCUSSION
Proving and fixing of Meeting table of size 2400mmX 900mmX750mm should have work top 50mm thick made of prelam particle board
with fliptop box for ease of access to data and electrical points. Leg should be 200 mm thick and with 50 mm thick metal strip on both the
sides,leg carries all data & electrical wirings , Modesty panel should be 300 mm thick connecting both legs .The prelam particle board used
should meet international standards of quality and safety, as per EN 312, type P II, E2 and Indian standards IS 3087, grade II. Should meet
stringent norms of bending strength, screw-withdrawal strength and modulus of elasticity The Products should be tested as per BIFMA
standards. The Product should have ISO-9001:2000 and ISO 14001-2004 certifications. The boards used should meet international standards of
quality and safety, as per EN 312, type P II, E2 and Indian standards IS 3087, grade II. Should meet stringent norms of bending strength,
screw-withdrawal strength and modulus of elasticity .
I.
RECEPTION TABLE ( 2400Wx820Dx1000mmH)
Manufacturing, supplying and placing in position of the reception table of size 2400mmLX 820mmDX.1000H Top of the table shall be made
up of 50mm Pre- laminated Particle Board as per IS IS:12823 , edges finished with 2mm PVC Lipping. It shall have counter top of 50mm
thick with prelaminated particle board confirming to international standards of quality and safety, as per EN 312, type P II, E2 and Indian
standards IS 3087, grade II.Should meet stringent norms of bending strength, screw-withdrawal strength and modulus of elasticity .Worktop
height shall be 725mm and Counter height shall be 1035mm .Angles sustained with the arc must be 60 degree .All metal strips confirming to
following :Thickness 0.20 mm – 6.0 mm Temper 1/8 Hard , 1/4 Hard, 1/2 Hard, Full Hard Surface Finish Dull/Bright/Matt/Mirror Grade
D/DD/EDD/Super EDD/IF Edge Mill Edge/ Slit Edge, Thickness Tolerance +/- 0.02 mm Width Tolerance As per Specification Length
Tolerance(For Sheets) - 0 mm/+2 mm Camber Tolerance 1.50 mm Max. per 1000 mm shall have dimensions 0.8mm (thick) x665mm (height)
below the work surface and 0.8mm (thick) x 260mm (height) above the work surface. Legs of the desk shall be made of 18mm Pre- laminated
Particle Board and height 604 mm. supportd by 50mm thick plpb gable end (side vertical panel as per image) , front and top edge of gable end
cover with metal strip ,plpb modesty panel / front panel 50mm thick top edge cover with strip., counter top of table of size
87
NLUO
SIGNATURE AND SEAL
PMC
SIGNATURE AND SEAL
CONTRACTOR
SIGNATURE AND SEAL