Download Maxtor D540X-4G Technical data
Transcript
ATA Bus Interface and ATA Commands ( The Maxtor D540X-4G hard disk drives allow their host systems to address the full set of command and control registers as specified in clause 7 of the ATA/ATAPI-6 standard. This includes the 48-bit Address feature set described in clause 6. ( (( !+* The µProcessor, Disk Controller, and ATA Interface electronics are contained in a proprietary ASIC developed by Maxtor. (( *)")33!"0 The Maxtor D540X-4G hard disk drives support all the mandatory commands from the general feature set for devices not supporting the Packet command feature set. Refer to the ATA/ATAPI-6 standard for a detailed description of these commands. Table 5-1 lists the supported commands. .+>Supported Commands )33!" )33!" )" * ,#0 +*?0@ CHECK POWER MODE 98h, E5h DEVICE CONFIGURATION FREEZE LOCK B1h C1h DEVICE CONFIGURATION IDENTIFY B1h C2h DEVICE CONFIGURATION RESTORE B1h C0h DEVICE CONFIGURATION SET B1h C3h DOWNLOAD MICROCODE 92h 07h, 01h EXECUTE DRIVE DIAGNOSTIC 90h FLUSH CACHE E7h IDENTIFY DRIVE ECh IDLE 97h, E3h IDLE IMMEDIATE 95h, E1h NOP 00h READ BUFFER E4h 5-2 Maxtor D540X-4G