Download Wolf Ranges Installation guide

SPECIFICATIONS
Electrical
Installation must comply with all applicable electrical codes.
Locate the electrical supply flush with the wall or floor and
within the shaded area shown in the illustration on page 6.
A separate circuit, servicing only this appliance is required.
A ground fault circuit interrupter (GFCI) is not recommended
and may cause interruption of operation.
ELECTRICAL REQUIREMENTS
GAS RANGE
Electrical Supply
Service
Receptacle
Power Cord
4
|
grounded, 110/120 V AC, 60 Hz
15 amp dedicated circuit
3-prong grounding-type
6' (1.8 m)
Wolf Customer Care 800.222.7820